Magnetic,structural and electrical properties of ordered and disordered Co50Fe50 films

Co₅₀Fe₅₀ films with thickness varying from 100 to 500 Å were deposited on a glass substrate by sputtering process, respectively. Two kinds of CoFe films were studied: one was the as-deposited film, and the other the annealed film. The annealing procedure was to keep the films at 400 °C for 5 h in a vacuum of 5×10⁻⁶ mbar. From the X-ray study, we find that the as-deposited film prefers the CoFe(1 1 0) orientation. Moreover, the body-centered cubic (bcc) CoFe(1 1 0) line is split into two peaks: one corresponding to the ordered body-centered tetragonal (bct) phase, and the other, the disordered bcc phase. After annealing, the peak intensity of the ordered bct phase becomes much stronger, while that of the disordered bcc phase disappears. The annealing has also caused the ordered CoFe(2 0 0) line to appear. When the amount of the ordered bct phase in Co₅₀Fe₅₀ is increased, the saturation magnetization (M_s) and coercivity (H_c) become larger, but the electrical resistivity (ρ) decreases. From the temperature coefficient of resistance (TCR) measurement, we learn that the bct grains in the CoFe film start to grow at temperature 82 °C.     

Double neutron/proton ratio of nucleon emissions in isotopic reaction systems as a robust probe of nuclear symmetry energy

The double neutron/proton ratio of nucleon emissions taken from two reaction systems using four isotopes of the same element, namely, the neutron/proton ratio in the neutron-rich system over that in the more symmetric system, has the advantage of reducing systematically the influence of the Coulomb force and the normally poor efficiencies of detecting low energy neutrons. The double ratio thus suffers less systematic errors. Within the IBUU04 transport model the double neutron/proton ratio is shown to have about the same sensitivity to the density dependence of nuclear symmetry energy as the single neutron/proton ratio in the neutron-rich system involved. The double neutron/proton ratio is therefore more useful for further constraining the symmetry energy of neutron-rich matter.     

Diffuse Backscattering Mueller Matrices Patterns from Turbid Media

We present experimental measurements and theory of the diffusely backscattered Mueller matrix patterns that arise from illuminating a turbid medium with a polarized laser beam. Our technique employs polarized light from a He-Ne laser (λ=632.8nm) focused onto the surface of the scattering medium. A surface area of approximately 2×2 cm² centred on the light input point is imaged through polarization analysis optics onto a CCD camera. The Mueller matrix is reconstructed by 49 intensity measurements with various orientations of polarizer and analyser. The measured Mueller matrix of polystyrene spheres is compared with the theory result of incoherent scattering of light by spheres. It shows that the azimuthal patterns of the Mueller matrix are determined by the symmetry of the turbid media and the shape of scattering particles. The result is further proved by experiments with polystyrene spheres of different concentrations in de-ionized water.     

Acoustic characterization and prediction for fan-duct-plenum-room integrations

This paper investigates mutual influence of duct and room acoustics in the whole fan-duct-plenum-room integrations. Applying the parametric design language of finite element software ANSYS (APDL), dimensional and positional influence on system acoustics has been studied. Models with different room dimensions, duct lengths, duct cross-sections, duct locations, duct discharges and duct elbow were constructed, and their characteristics were compared qualitatively. Results show that small rooms, short ducts, large duct cross-sections and bell mouth duct discharges help to increase room sound pressure levels (SPLs); SPLs in ducts and plenums are sensitive to duct dimensions and duct discharge types but insensitive to duct locations and room dimensions; duct elbows have relatively indistinct acoustic influence in each component. Based on the calculation results, a semi-experimental method was proposed for simply and approximately evaluating indoor acoustic spectra of fan-duct-plenum-room integrations, then an example was used to demonstrate the prediction process. Finally, by adopting several ideal models, sound field constitutions, duct and room wall admittances and duct end reflection were explored quantitatively. This study may give a detailed understanding of fan-duct-plenum-room acoustics for researchers, also it might provide a new, simple and approximate prediction method for professionals to evaluate and improve fan-ducted acoustics.     

Measurements of NH3 in the ν2 = 1 state by a solid-state, photomixing, THz spectrometer, and a simultaneous analysis of the microwave, terahertz, and infrared transitions between the ground and ν2 inversion-rotation levels

In this paper, we report 30 THz measurements of ammonia in its excited, ν₂ = 1, inversion state. These measurements include transition frequencies and pressure shifts (where significant enough to be observed). Included in the data are two forbidden and three ro-inversion transitions, as well as 18 transitions never directly measured before. The measurements were made with an all-solid-state, diode-laser, difference-frequency spectrometer. Using an innovative laser-frequency locking scheme, this spectrometer provided accurately determined and continuously tuned THz-frequencies without requiring accurate knowledge of the absolute laser frequencies. The details of the spectrometer’s frequency calibration is discussed. A global analysis of NH₃ based on the available ground state, ν₂ = 1 state, and ν₂-band transitions was carried out, and the resulting set of recommended molecular effective-Hamiltonian parameters for ammonia is presented. In addition, calculated center frequencies and intensities for all possible transitions up to J = 20 between rotation, inversion, and vibration levels in the ground and ν₂ = 1 states are included as supplementary material.     

Design of defect-core in highly birefringent photonic crystal fibers with anisotropic claddings

The influence of defect-core on the birefringence and confinement losses of rectangular-lattice photonic crystal fibers are investigated numerically by applying the multipole method. Numerical results illustrate that the birefringence in such fibers is determined not only by the arrangement of air holes in the cladding but also the shape of the core. It is found that asymmetry of the core represented by its rectangular shape implies a higher effective index of the mode that is parallel with the longer side of the rectangle, whereas the anisotropic rectangular-lattice cladding gives rise to just the opposite effect and thus the resulting birefringence can be controlled by a proper combinations of both mechanisms. In particular, effect of the asymmetry of the core on the birefringence is dominant for shorter wavelength. Increased birefringence and reduced confinement loss can be achieved, if we form the core by the omission of several air holes in a row to reduce its negative effect on the birefringence. On the other hand, when asymmetry is increased in the other direction, a negative birefringence at shorter wavelength can be achieved. This occurs due to the fact that asymmetry of the core at higher frequencies overcomes the effect of the asymmetric cladding. As a result, its possible to achieve zero birefringence in anisotropic cladding photonic crystal fiber with an asymmetric core.     

Comparison of polarization-mode dispersion tolerances in polarization-multiplexing systems with different modulation formats

The polarization-mode dispersion (PMD) tolerance of 10 Gb/s polarization-multiplexing (PM) system is investigated. Using the importance sampling (IS) method, the outage probabilities of the PM systems with three modulation formats, including on-off keying (OOK), differential phase-shift keying (DPSK) and differential quadrature phase-shift keying (DQPSK), are quantified. When the amplified spontaneous emission (ASE) noise is assumed to be dominant, we evaluate the optical power penalties caused by the PMD effect at bit error rate (BER) of 10⁻¹². The performance of compensated PM systems with variable optical delay line is also described. The simulation results indicate that the OOK signal with higher duty cycle (DC) performs better in the PM systems with PMD compensation. It is found that the higher-order PMD impairs seriously the performance of the PM system, and phase-keying formats are more sensitive to the PMD than the OOK.     

Ultrafast motion of liquids C2H4Cl2 and C2H4Br2 studied with a femtosecond laser

Transient optical Kerr effect of liquids C₂H₄Cl₂ and C₂H₄Br₂ is investigated, for the first time to our knowledge, with a femtosecond (fs) probe laser delayed with respect to a coherent fs pump laser. Coherent coupling and electronic Kerr signals are observed around zero delay when pump and probe overlap. Persisting after the pump-probe overlap are Kerr signals arising from the torsional and other intramolecular vibrations of the trans and gauche conformations; Kerr signals arising from the intermolecular motion are also observed. Vibrational quantum interference is only observed in liquid C₂H₄Br₂ and the related beats data are fitted with the torsional vibrations, 91 cm⁻¹ (gauche) and 132 cm⁻¹ (trans), and the CCBr angle-bending vibrations, 231 cm⁻¹ (gauche) and 190 cm⁻¹ (trans), with dephasing times, 0.45 ps, 0.45 ps, 2 ps, and 1.5 ps, respectively. These vibrational frequencies agree with those obtained in the frequency-domain. That no vibrational mode is observed for C₂H₄Cl₂ might be attributed to ineffective Raman-pumping. Kerr signals observed after the pump-probe overlap are Fourier transformed to give the spectra of the intermolecular motion and the vibrational spectrum, which agrees with the one observed in the infrared absorption and/or Raman scattering heretofore.     

基于安卓平台的糖尿病监护系统的研究及实现

基于目前针对糖尿病的研究主要集中在健康管理及血糖浓度监测方面,在糖尿病病情控制方面并不乐观的现状,设计开发了一套能够实时监护老年患者注射药物情况的远程家庭医疗系统。该系统由智能检测硬件系统,手机客户端和WEB信息管理端组成,不仅可以解决独孤老人时常忘记注射胰岛素的问题,也有利于解决我国老年患者糖尿病监护难的问题,同时也能提醒青壮年实时携带注射针剂盒,缓解糖尿病并发症的发生。通过实时实验测试,该糖尿病监护系统可靠、稳定,且具有良好的实际应用价值。