微波消解–原子荧光法同时测定PM2.5中砷、汞含量

采用微波消解–原子荧光法测定PM2.5中砷、汞含量。实验结果表明,当还原剂硼氢化钾的质量分数为2%、溶液介质酸度为4%(体积分数)盐酸时,同时测定砷、汞可获得最佳的荧光值。砷、汞测定的检出限分别为0.027,0.006μg/L,空白滤膜的加标回收率分别为95.3%~101.7%,96.0%~106.0%,样品的加标回收率分别为95.0%~103.5%,93.3%~110.0%。该法检出限低,准确度高,适用于环境空气PM2.5中砷、汞含量的测定。     

二(2-羟基苄基)胺的合成及其钠盐结构

二(水杨醛亚胺)甲基-2-苯酚和硼氢化钾进行加氢还原反应,不能得到预期的桥联三酚,会发生C-N键断裂生成了二(2-羟基苄基)胺。二(2-羟基苄基)胺在氢氧化钠溶液中生成季铵桥联的二酚钠盐,其分子结构经过了X光单晶衍射分析表征。     

超高效液相色谱串联质谱法同时快速测定牛奶中不同类型的11种兽药残留

建立了超高效液相色谱串联质谱测定牛奶中四环素类、青霉素类、磺胺类和泰乐菌素等11种兽药残留的检测方法。样品经乙腈超声提取后离心分离,上层清液稀释10倍后过0.2μm滤膜上机测定。在优化条件下,11种兽药在其线性范围内的相关系数均在0.998以上,定量下限(LOQ,S/N=10)为0.3～15μg/kg,在低、中、高3个水平下的加标回收率为81%～117%,相对标准偏差为0.6%～10.2%。方法用于实际牛奶样品中兽药残留量的测定,结果满意。     

介孔碳/硫复合材料与室温钠硫电池

通过熔融扩散法合成了一系列不同含硫量的有序介孔碳(CMK-3)/硫复合材料(C x Sy).使用X射线衍射(XRD)、拉曼光谱(Raman)、比表面积测定仪(BET)、扫描电镜(SEM)、透射电镜(TEM)分析、表征和观察样品.将复合材料组装成钠硫电池,室温下测试电化学性能.循环伏安(CV)曲线结果表明,室温钠硫电池在1.61 V处有一个还原峰,对应于Na2Sx(x=2~5)的形成;在1.82 V和1.95 V分别有一个氧化峰,对应于Na2Sx(x=2~5)的分解.50%(by mass,下同)硫含量(C1S1)电极0.05C(1C=558 mA·g-1)倍率首周放电容量500 mAh·g-1,50周期循环比容量为305.6 mAh·g-1.交流阻抗数据拟合计算其表观活化能为21.83 kJ·mol-1.本研究可为室温钠硫电池多孔电极材料的研究提供一定的指导作用.     

准晶体的研究进展

准晶体是一种介于晶体和非晶体之间的固体。按照其准周期维数的分类方法分为一维、二维、三维准晶体,具有力学性能、电学性能和磁性能。利用其优良的性能特点,可将其应用于表面改性材料和结构材料增强相中。对准晶体的基础研究主要在其原子结构测定、形成因素、成分预测、单质组元的寻找和物理性质的有效调控等方面;而应用研究主要包括其薄膜技术和微纳米化的研究等。     

Lipid profiling of human plasma from peritoneal dialysis patients using an improved 2D (NP/RP) LC-QToF MS method

An improved online two-dimensional liquid chromatography-quadrupole time-of-flight mass spectrometry (2D LC-QToF MS) system was developed for the lipid profiling of human plasma, in which different lipid classes were separated by the first dimensional normal-phase (NP) LC and different lipid molecular species were separated by the second dimensional reversed-phase (RP) LC. This 2D LC-QToF MS system was built based on a ten-port, two-position valve as the interface, the conditions of which had been optimized and discussed in detail. As two loops were used to trap and transfer the first dimensional elute to the second dimension separately, this new interface suppressed the sample band broadening in the first dimensional column, increased the recovery and repeatability of 2D LC interface, and offered the possibility for the realization of not-stop-flow NP/RP 2D LC system. Finally, 190 endogenous lipid species out of 10 lipid classes were determined within a single run from the plasma of peritoneal patients. This method was also applied to identify the difference in lipid profile between plasma from peritoneal dialysis patients with bad volume status and peritoneal dialysis patients with good volume status. The discovery of 30 potential biomarkers would be helpful to the malnutrition, inflammation, and atherosclerosis syndrome investigation.     

Development of monolith-based stir bar sorptive extraction and liquid chromatography tandem mass spectrometry method for sensitive determination of ten sulfonamides in pork and chicken samples

A highly sensitive method was developed for the simultaneous determination of ten sulfonamides in pork and chicken samples by monolith-based stir bar sorptive extraction (SBSE) coupled to high-performance liquid chromatography tandem mass spectrometry. The samples were freeze-dried and extracted by acetonitrile, then enriched and further extracted by SBSE which was based on poly(vinylphthalimide-co-N,N-methylenebisacrylamide) monolith (SBSE-VPMB) as coating. To achieve optimum extraction performance of SBSE for sulfonamides, several parameters, including pH value and ionic strength in the sample matrix and extraction and desorption time, were investigated in detail. Under the optimal conditions, the limits of detection (S/N?=?3) for target sulfonamides were 1.2–6.1 ng/kg in pork and 2.0–14.6 ng/kg in chicken, respectively. Real samples spiked at the concentration of 0.5 and 5.0 μg/kg showed recoveries above 55 % and relative standard deviations below 12 %. At the same time, the extraction performances of target sulfonamides on SBSE-VPMB were compared with other SBSE based on porous monolith and commercial SBSE.

Magnetic separation of heavy metal ions and evaluation based on surface‐enhanced Raman spectroscopy: Copper(II) ions as a case study

A new approach was developed for the magnetic separation of copper(II) ions with easy operation and high efficiency. p‐Mercaptobenzoic acid served as the modified tag of Fe₂O₃@Au nanoparticles both for the chelation ligand and Raman reporter. Through the chelation between the copper(II) ions and carboxyl groups on the gold shell, the Fe₂O₃@Au nanoparticles aggregated to form networks that were enriched and separated from the solution by a magnet. A significant decrease in the concentration of copper(II) ions in the supernatant solution was observed. An extremely sensitive method based on surface‐enhanced Raman spectroscopy was employed to detect free copper(II) ions that remained after the magnetic separation, and thus to evaluate the separation efficiency. The results indicated the intensities of the surface‐enhanced Raman spectroscopy bands from p‐mercaptobenzoic acid were dependent on the concentration of copper(II) ions, and the concentration was decreased by several orders of magnitude after the magnetic separation. The present protocol effectively decreased the total amount of heavy metal ions in the solution. This approach opens a potential application in the magnetic separation and highly sensitive detection of heavy metal ions.     

Accelerated solvent extraction and pH‐zone‐refining counter‐current chromatographic purification of yunaconitine and 8‐deacetylyunaconitine from Aconitum vilmorinianum Kom

This study aimed to seek an efficient method to extract and purify yunaconitine and 8‐deacetylyunaconitine from Aconitum vilmorinianum Kom. by accelerated solvent extraction combined with pH‐zone‐refining counter‐current chromatography. The major extraction parameters for accelerated solvent extraction were optimized by an orthogonal test design L₉ (3)⁴. Then a separation and purification method was established using pH‐zone‐refining counter‐current chromatography with a two‐phase solvent system composed of petroleum ether/ethyl acetate/methanol/water (5:5:2:8, v/v) with 10 mM triethylamine in the upper phase and 10 mM HCl in the lower phase. From 2 g crude extract, 224 mg of 8‐deacetylyunaconitine (I) and 841 mg of yunaconitine (II) were obtained with a purity of over 98.0%. The chemical structures were identified by ESI‐MS and ¹H and ¹³C NMR spectroscopy.