Excellent degradation performance of azo dye by metallic glass/titanium dioxide composite powders

The metallic glass/titanium dioxide powders (MG/TiO₂) with enhanced photocatalytic oxidation activity were synthesized, which exhibit a higher efficiency in decolorizing methylene blue solutions (MB). Compared with the pure TiO₂ and crystalline alloy/TiO₂ (CA/TiO₂) under the same circumstances, its degradation rate was 60 % and 30 % higher, respectively. Furthermore, compared with the CA/TiO₂, the MG/TiO₂ photocatalytic rate was three times faster when decolorizing MB. Considering the excellent intrinsic high-performance photocatalytic degradation under visible light irradiation, these novel powders were proven to have potential applications in water purification industry.     

Reversible Control over Molecular Recognition in Surface‐Bound Photoswitchable Hydrogen‐Bonding Receptors: Towards Read–Write–Erase Molecular Printboards

The synthesis of an anthracene‐bearing photoactive barbituric acid receptor and its subsequent grafting onto azide‐terminated alkanethiol/Au self‐assembled monolayers by using an Cu^I‐catalyzed azide–alkyne reaction is reported. Monolayer characterization using contact‐angle measurements, electrochemistry, and spectroscopic ellipsometry indicate that the monolayer conversion is fast and complete. Irradiation of the receptor leads to photodimerization of the anthracenes, which induces the open‐to‐closed gating of the receptor by blocking access to the binding site. The process is thermally reversible, and polarization‐modulated IR reflection–absorption spectroscopy indicates that photochemical closure and thermal opening of the surface‐bound receptors occur in 70 and 100 % conversion, respectively. Affinity of the open and closed surface‐bound receptor was characterized by using force spectroscopy with a barbituric‐acid‐modified atomic force microscope tip.     

Epitope Mapping of Monoclonal Antibodies using Synthetic Oligosaccharides Uncovers Novel Aspects of Immune Recognition of the Psl Exopolysaccharide of Pseudomonas aeruginosa

Pseudomonas aeruginosa is an opportunistic Gram‐negative bacterium that can cause life‐threatening infections in critically ill and cystic fibrosis patients. The Psl exopolysaccharide of P. aeruginosa offers an attractive serotype‐independent antigen for the development of immunotherapies. Here, the first chemical synthesis of a panel of oligosaccharides derived from the exopolysaccharide of P. aeruginosa by a synthetic strategy that efficiently deals with the stereoselective installation of several β‐mannosides and the formation of a mannoside that is extended by saccharide moieties at C‐1, C‐2, and C‐3 in a crowded 1,2,3‐cis configuration is described. The approach was employed to prepare tetra‐, penta‐, and hexa‐ and decasaccharide part structures. The compounds were employed to define the epitope requirements of several functionally active monoclonal antibodies (mAbs) that can bind three distinct epitopes of Psl (class I, II, and III). The class II mAb reacted potently with each oligosaccharide indicating its epitope resides within the tetrasaccharide and does not require the branched mannoside of Psl. The class III antibody did not bind the tetra‐ or pentasaccharide; however, it did react potently with the hexasaccharide and weakly with the decasaccharide, suggesting a terminal glucoside is required for optimal binding. Unexpectedly, the class I mAb did not bind any of the oligosaccharides indicating that Psl contains a yet to be elucidated sub‐stoichiometric isoform. This study demonstrates that functional activity of a mAb does not only depend on the avidity of binding but also on the location of an epitope within a bacterial polysaccharide. The results also provide a strong impetus to analyze further the structure of Psl to identify the class I epitope, that is expected to provide an attractive target for the development of a synthetic vaccine for P. aeruginosa.     

Synthesis of carboxyl cellulose sulfates with regioselective sulfation and regiospecific oxidation using cellulose trifluoroacetate as intermediates

Synthesis of cellulose sulfates (CSs) and carboxyl cellulose sulfates (COCSs) with regioselectively or regiospecifically distributed functional groups within anhydroglucose units was reported. CS with regioselectively distributed sulfate groups at 2,3-O- or 2,6-O-position were homogeneously synthesized and cellulose trifluoroacetate (CTFA) was used as intermediates. The trifluoroacetyl groups were detected primarily at 6-O-position and their distributions could be altered by changing the amount of trifluoroacetyl anhydride (TFAA). Various sulfating agents were used for further homogeneous sulfation of CTFA. The total degree of sulfation (DS_S) and the distribution of sulfate groups within the repeating units were affected by the amount of TFAA, the type and amount of sulfating agents. Subsequent homogenous 4-acetamide-TEMPO or TEMPO-mediated oxidation of CS led to COCS with carboxyl groups regiospecifically distributed at C6 position, which may be interesting structural mimics for natural occurring heparin.     

亚硝酸根在纳米氧化锆-CTAB复合物膜修饰电极上的电化学行为及测定

制备了纳米ZrO2,采用XRD和原子力显微镜技术加以表征。构建了十六烷基三甲基溴化铵-纳米ZrO2修饰电极。用循环伏安法和示差脉冲伏安法研究了亚硝酸根(NO2-)在该修饰上的电化学行为,结果表明,该修饰电极对NO2-的氧化具有良好的电催化能力,示差脉冲伏安信号与其浓度在6×10-7～1.6×10-4mol/L范围内呈现良好的线性关系,检出限为1.3×10-7mol/L(S/N=3)。此外,方法已用于NO2-样品的测定。     

酸性AlCl3-BMIC离子液体中的铝阳极溶解

采用线性扫描伏安法研究了Lewis 酸性AlCl₃-BMIC (BMIC: 1-butyl-3-methylimidazolium chloride)离子液体中铝电极的溶解. 铝电极在阳极极化时出现了钝化现象, 钝化是由于在铝电极表面形成了固体AlCl₃钝化膜造成的. 铝的电化学溶解过程可以依次分为三个区: 电化学控制区、过渡区和钝化区. 在电化学控制区, 铝的电化学溶解速率随着电位的正移而逐渐增加; 在过渡区, 由于电极表面AlCl₄^-和Al₂Cl₇^-浓度发生改变而析出固体AlCl₃使得铝电化学溶解速率随着电位的正移而逐渐减小; 当钝化膜形成之后, 铝的电化学溶解速率不再随着电位的正移而发生改变, 铝溶解进入钝化区. 增加搅拌、升高温度、降低离子液体AlCl₃摩尔分数都可以增加铝溶解阳极极限电流密度.     

加速溶剂萃取-气相色谱-串联质谱法测定罗非鱼中拟除虫菊酯类农药残留量

提出了气相色谱-串联质谱法测定罗非鱼中7种拟除虫菊酯类农药（联苯菊酯、甲氰菊酯、三氟氯氰菊酯、氯菊酯、氯氰菊酯、氰戊菊酯和溴氰菊酯）残留量的方法。样品以环己烷-乙酸乙酯（1+1）混合液为萃取剂,经加速溶剂萃取仪提取后,经Florisil固相萃取小柱净化后,用丙酮-正己烷（1+9）混合液淋洗,洗脱液于45℃水浴氮吹近干后用正己烷定容至1 mL,通过TR-5MS毛细管色谱柱分离,采用电子轰击离子源选择反应监测模式进行质谱测定。7种拟除虫菊酯类农药的检出限（3S/N）在0.20～2.1μg·kg^-1之间。以空白罗非鱼样品为基体,加入标准溶液进行回收试验,测得回收率在57.9%～107%之间,测定值的相对标准偏差（n=6）均小于12.0%。     

The localized longitudinal index theorem for Lie groupoids and the van Est map

We define the “localized index” of longitudinal elliptic operators on Lie groupoids associated with Lie algebroid cohomology classes. We derive a topological expression for these numbers using the algebraic index theorem for Poisson manifolds on the dual of the Lie algebroid. Underlying the definition and computation of the localized index, is an action of the Hopf algebroid of jets around the unit space, and the characteristic map it induces on Lie algebroid cohomology. This map can be globalized to differentiable groupoid cohomology, giving a definition of the “global index”, that can be computed by localization. This correspondence between the “global” and “localized” index is given by the van Est map for Lie groupoids.     

Context-free grammars for triangular arrays

We consider context-free grammars of the form G = {f → fb1+b2+1ga1+a2, g → fb1 ga1+1},where ai and bi are integers sub ject to certain positivity conditions. Such a grammar G gives rise to triangular arrays {T(n, k)}0≤k≤n satisfying a three-term recurrence relation. Many combinatorial sequences can be generated in this way. Let Tn (x) =∑nk=0T(n, k)xk. Based on the differential operator with respect to G, we define a sequence of linear operators Pn such that Tn+1(x) = Pn(Tn(x)). Applying the characterization of real stability preserving linear operators on the multivariate polynomials due to Borcea and Br?ndén, we obtain a necessary and sufficient condition for the operator Pn to be real stability preserving for any n. As a consequence, we are led to a sufficient condition for the real-rootedness of the polynomials defined by certain triangular arrays, obtained by Wang and Yeh.Moreover, as special cases we obtain grammars that lead to identities involving the Whitney numbers and the Bessel numbers.     

Investigation of block depth distribution in PS‐b‐PMMA block copolymer using ultra‐low‐energy cesium sputtering in ToF‐SIMS

Directed self‐assembly of block copolymers (BCPs) is a promising candidate for next generation nanolithography. In order to validate a given pattern, the lateral and in‐depth distributions of the blocks should be well characterized; for the latter, time‐of‐flight (ToF) SIMS is a particularly well‐adapted technique. Here, we use an ION‐TOF ToF‐SIMS V in negative mode to provide qualitative information on the in‐depth organization of polystyrene‐b‐polymethylmethacrylate (PS‐b‐PMMA) BCP thin films. Using low‐energy Cs⁺ sputtering and Bi₃⁺ as the analysis ions, PS and PMMA homopolymer films are first analyzed in order to identify the characteristic secondary ions for each block. PS‐b‐PMMA BCPs are then characterized showing that self‐assembled nanodomains are clearly observed after annealing. We also demonstrate that the ToF‐SIMS technique is able to distinguish between the different morphologies of BCP investigated in this work (lamellae, spheres or cylinders). ToF‐SIMS characterization on BCP is in good agreement with XPS analysis performed on the same samples. Copyright © 2013 John Wiley & Sons, Ltd.