Characterization of low molecular weight components of [(ViMe2SiO1/2)x(PhSiO3/2)y(SiO4/2)z], [(ViMe2SiO1/2)x(SiO4/2)y], and [(SiO4/2)x(HO1/2)y(tBuO1/2)z] silsesquioxanes by electrospray ionization fourier transform mass spectrometry (ESI-FTMS)

This paper describes the characterization of low molecular weight components of four materials using electrospray ionization Fourier transform mass spectrometry (ESI-FTMS). The materials in the current study are [(ViMe₂SiO_1/2)_x(PhSiO_3/2)_y(SiO_4/2)_z] (MTQ), [(ViMe₂SiO_1/2)_x(SiO_4/2)_y] (MQ), and [(SiO_4/2)_x(HO_1/2)_y(^tBuO_1/2)_z] (Q) silsesquioxanes. Accurate mass measurements coupled with knowledge of resin chemistry afforded siloxane composition determination that was used to propose specific structures for the oligomers. Branched or linear (T_nQ_mM_n+2m+2), and monocyclic (T_nQ_mM_n+2m) structures are predominant structures for the low molecular weight species in MTQ. For MQ and Q, more condensed structures, such as partially opened cage structures (Q_mM_2m?6 and Q_mM_2m?8), were identified. The differences between MQ, Q, and MTQ are likely attributed to differences in intrinsic structure and reactivity of T and Q building blocks. The structural information obtained for these oligomeric species will ultimately provide a better understanding of new resin materials and their associated physical properties.     

大环二萜天然产物(±)-Mayol的全合成

西松烷型二萜类化合物是一大类广泛分布于松脂、烟草、陆地动物及海洋生物体中的具有十四元碳环骨架的化合物.其结构新颖复杂,且大多具有显著和广谱的生物活性.近几十年来,有关这类化合物的研究已引起了人们的极大兴趣.因此,开展这类天然产物及其类似物的全合成及构效关系的研究不仅具有重要的学术价值,而且具有潜在的应用前景.     

新型分子筛Ti-MMM-1的合成及其催化性能的研究

通过控制TEOS的水解，在不同时间添加与MCM-41和MFI相应的有机模板剂合成出了一种新型分子筛，Ti-MMM-1，采用XRD、FT-IR和低温N2吸附对其进行表征，并用H2O2氧化环己烷和环己醇对其催化活性进行评价．结果表明，Ti-MMM-1是一种具有MCM-41和MFI结构的两相混合的微孔／介孔材料，IR分析表明钛原子已进入分子筛骨架，并在环己烷和环己醇的氧化中表现出较好的催化活性和较高的选择性．     

过渡金属离子对HPAsMoVO杂多酸的氧化性能的影响

用H2-TPR方法研究了过渡金属离子及其含量对杂多酸-HxPAs0.2Mo10VOy的氧化性能的影响,并在固定床反应器上考察了M0.2HxPAs0.2Mo10VOy(M=Fe3 、Co2 、N i2 和Cu2 )催化剂对异丁烷选择性氧化的催化性能.研究结果表明用过渡金属离子取代杂多酸中的质子,可以在较大程度上增强杂多酸的低温氧化能力,其中Fe3 对增强杂多酸的催化活性最为明显,而Cu2 却有利于提高目的产物甲基丙烯酸的选择性.     

渗透蒸发脱盐的研究

将选择性透过膜和汽化相结合的分离过程是当前的研究热点,其中采用低热导率、疏水性多孔膜的过程称膜蒸馏,而采用非多孔性半透膜的过程则称渗透蒸发。将该分离过程用于盐水脱盐已有很多报道,并已建成中试设备,但采用的大多是膜蒸馏,所用膜的成本很高。本文研究制了一种价廉并带有致密层的非对称性含钠离子聚乙烯醇(PVA)-聚乙二醇(PEG)分离膜,并用该膜对渗透蒸发脱盐进行了初步研究。 1 实验 1.1 膜制备 将一定配比的PVA与PEG及钠盐水溶液在适当温度下混溶,加入适量醛类交联剂,数分钟后在选定的基材上流涎成膜,室温下自然晾干,再经35℃～50℃控温红外线干燥。 1.2 膜结构及脱盐流程 扫描电镜拍摄的膜断面形貌图像(图1)表明,该膜为非对称膜,表层厚约13μm,其中厚约2～3/μm的上表层为疏松结构,下表层为致密结构。将该类膜用于3.5％NaCl水溶液脱盐,运行4h后再漂洗、干燥作断面Na元素波谱线分析(图2)发现,在膜下层(右侧)厚约30μm层内检测不到Na元素。脱盐流程见文献。     

制备trans-Fe(CO)_3(PR_3)_2的新的取代过程

报道了用H_2Fe(CO)_4制备trans-Fe(CO)_3(PR_3)_2的新的羰基取代反应。在 过量质子存在下，H_2Fe(CO)_4中的羰基被活化，中心铁原子对膦的亲核进攻更为 敏感。在这种条件下H_2Fe(CO)_4与膦反应时，首先失去氢生成Fe(CO)_4(PR_3), Fe(CO)_4-(PR_3)再与第二个膦反应可高产率的得到trans-Fe(CO)_3(PR_3)_2。用 PPh_3与Fe(CO)_4(PPh_3)在过量质子存在下反应生成trans-Fe(CO)_3(PR_3)_2，证 实了上述过程。     

Aqueous dispersions of single-wall and multiwall carbon nanotubes with designed amphiphilic polycations

Poor solubility of single-walled and multiwalled carbon nanotubes (NTs) in water and organic solvents presents a considerable challenge for their purification and applications. Macromolecules can be convenient solubilizing agents for NTs and a structural element of composite materials for them. Several block copolymers with different chemical functionalities of the side groups were tested for the preparation of aqueous NT dispersions. Poly(N-cetyl-4-vinylpyridinium bromide-co-N-ethyl-4-vinylpyridinium bromide-co-4-vinylpyridine) was found to form exceptionally stable NT dispersions. It is suggested that the efficiency of macromolecular dispersion agents for NT solubilization correlates with the topological and electronic similarity of polymer-NT and NT-NT interactions in the nanotube bundles. Raman spectroscopy and atomic force and transmission electron microcopies data indicate that the polycations are wrapped around NTs forming a uniform coating 1.0-1.5 nm thick. The ability to wind around the NT originates in the hydrophobic attraction of the polymer backbone to the graphene surface and topological matching. Tetraalkylammonium functional groups in the side chains of the macromolecule create a cloud of positive charge around NTs, which makes them hydrophilic. The prepared dispersions could facilitate the processing of the nanotubes into composites with high nanotube loading for electronic materials and sensing. Positive charge on their surface is particularly important for biological and biomedical applications because it strengthens interactions with negatively charged cell membranes. A high degree of spontaneous bundle separation afforded by the polymer coating can also be beneficial for NT sorting.     

循环流化床生物质气化炉内计算流体动力学模拟——鼓泡流化床内改进的颗粒床模型（英文）

采用改进颗粒床模型的CFD方法模拟了实验室规模冷模装置内鼓泡床的流体流动时空特性。模拟结果表明表观气速是影响气固动态特征和压力波动的主要因素之一：随表观气速的增大，气泡数目增加，气泡体积增大，压力波动增强；气速越高时均压降越大；在内循环鼓泡流化床内固体颗粒呈“单室”流型。上述与实验观察相吻合的模拟结果将有助于放大和设计商业化的内循环流化床生物质气化炉。     

Analysis of transient membrane protein interactions by single-molecule diffusional mobility shift assay

Various repertoires of membrane protein interactions determine cellular responses to diverse environments around cells dynamically in space and time. Current assays, however, have limitations in unraveling these interactions in the physiological states in a living cell due to the lack of capability to probe the transient nature of these interactions on the crowded membrane. Here, we present a simple and robust assay that enables the investigation of transient protein interactions in living cells by using the single-molecule diffusional mobility shift assay (smDIMSA). Utilizing smDIMSA, we uncovered the interaction profile of EGFR with various membrane proteins and demonstrated the promiscuity of these interactions depending on the cancer cell line. The transient interaction profile obtained by smDIMSA will provide critical information to comprehend the crosstalk among various receptors on the plasma membrane.Subject terms: Fluorescence imaging, Super-resolution microscopy, Single-molecule biophysics     

Thermal degradation of wood treated with guanidine compounds in air: Flammability study

Wood has been treated with guanidine phosphate, guanidine nitrate, guanidine carbonate and guanidine chloride to impart flame retardancy. The samples were subjected to differential thermal analysis (DTA) and thermogravimetry (TG) from ambient temperature to 800°C in air to study their thermal behaviors. From the resulting data, kinetic parameters for different stages of thermal degradation were obtained following the method of Broido. For the decomposition of wood and flame retardant wood, the activation energy was found to decrease from 116 to 54 kJ mol^–1; the char yield was found to increase from 5.6 to 34.9%, LOI from 18 to 41.5, which indicated that the flame retardancy of treated wood was improved. Effects of the different compounds on the degradation and flammability of wood have also been proposed.This revised version was published online in November 2005 with corrections to the Cover Date.