Preparation and Mechanical and Tribological Properties of High-Density Polyethylene/Hydroxyapatite Nanocomposites

High-density polyethylene (HDPE) nanocomposites reinforced with hydroxyapatite nanorods (nHA) were fabricated by means of extrusion and injection molding. The thermal, mechanical, and dry sliding wear properties of HDPE-based nanocomposites filled with nHA loadings up to 20 wt% were investigated. The results of mechanical property characterization showed that nHA additions improved the hardness, elastic modulus, and yield strength of HDPE at the expense of its tensile ductility and impact strength. Thermogravimetric analysis and heat deflection temperature measurements revealed that nHA fillers are very effective to enhance the thermal stability of HDPE. The wear behavior of HDPE/nHA nanocomposites was studied using a pin-on-disk tribometer. nHA fillers of a large aspect ratio improved the wear resistance of HDPE substantially because of their load-bearing effect and the formation of a continuous transfer film on the steel counterface.     

The Mechanical Properties,Compatibility, and Thermal Stabilities of POE-Graft-Methyl Methacrylate and Acrylonitrile(POE-g-MAN)/ Styrene-Acrylonitrile Copolymer (SAN Resin) Blends

POE-graft-methyl methacrylate and acrylonitrile (POE-g-MAN) was prepared by graft copolymerization of methyl methacrylate (MMA) and acrylonitrile (AN) onto polyethylene-octene copolymers (POE) with suspension polymerization. POE-g-MAN/SAN resin blends (AOMS) were prepared by blending POE-g-MAN with styrene-acrylonitrile copolymer (SAN resin). The mechanical properties, compatibility, and thermal stabilities of AOMS were studied. The notched impact strength of the blends reached 54.0 kJ/m² when the AN/(MMA + AN) ratio (f_AN) of POE-g-MAN, benzoyl peroxide dosage, and POE content in AOMS were 15 wt%, 1.0 wt%, and 25 wt%, respectively. Transmission electron microscopy analysis showed that the highest toughness occurred when the size of POE-g-MAN particles and the surface-to-surface inter-particle distance were proper. Scanning electron microscopy analysis indicated that the AOMS fracture surface had plastic flow visible, which looked like a fibril morphology when the AN/(MMA + AN) ratio (f_AN) of POE-g-MAN was 15 wt%. The toughening mechanism of AOMS was shear yielding of the matrix, which endowed AOMS with remarkable toughness. Dynamic mechanical thermal analysis showed that the compatibility of the POE phase and SAN phase improved after graft copolymerization of MMA and AN onto POE. When the grafting chain polarity was appropriate, the miscibility between POE-g-MAN and SAN resin was the best. Thermogravimetry analysis showed that thermal stability of AOMS increased with increasing AN units in POE-g-MAN.     

Designing and Characterization of Biodegradable Multiblock Poly(L-Lactic Acid)/Polybutadiene Elastomers

A series of poly(L-lactic acid)/polybutadiene (PLA/PB) biodegradable multiblock elastomers was synthesized and characterized. A two-step process to prepare PLA/PB multiblock elastomers was applied. Melt polymerization was used to prepare poly(L-lactic acid) (PLA) terminated with hydroxyl groups and, at the same time, hydroxyl-terminated polybutadiene (HTPB) and 1,6-hexamethylene diisocyanate (HDI) were employed to synthesize diisocyanate-terminated polybutadiene (ITPB). Then, PLA and ITPB were reacted with different PLA/PB weight ratios. Consequently, a series of PLA/PB biodegradable poly(ester-urethane)s with crosslinked chains was obtained. Swelling characteristics and crosslink density of the crosslinked elastomer were investigated. DMA was applied to characterize its thermal properties. The measurement of mechanical properties showed that a PLA/PB elastomer with adjustable mechanical properties was synthesized. Micromorphology, hydrophobicity, and degradability of the material were also characterized.     

Graft Polymerization of Methyl Methacrylate- Acrylonitrile onto Poly(ethene-co-1-butene) and Its Toughening Effect on SAN Resin

Poly(ethene-co-1-butene)-graft-methyl methacrylate-acrylonitrile (PEB-g-MAN) was prepared by suspension grafting copolymerization of methyl methacrylate (MMA) and acrylonitrile(AN) onto PEB. PEB-g-MAN/SAN resin blends (ABMS) were prepared by blending PEB-g-MAN with styrene-acrylonitrile copolymer (SAN resin). The effects of AN/(MMA+AN) feed ratio (f_AN), PEB/(PEB+MMA+AN) feed ratio (f_PEB) and benzoyl peroxide (BPO) dosage on the monomer conversion ratio (CR), rubber's grafting ratio (GR), grafting efficiency (GE) of the copolymerization and the toughening effect of PEB-g-MAN on the SAN resin were investigated. FTIR quantitative analysis showed that when the weight percent of AN unit in the unextracted product was 21.5 wt% with f_AN of 25 wt%, the toughening effect of unextracted PEB-g-MAN on SAN resin was the highest. Gel permeation chromatography (GPC) analysis showed that when f_AN was 25 wt%, the grafted copolymer had the lowest molecular weight and ABMS had highest toughness. Transmission electron microscopy (TEM) analysis showed that the highest toughness occurred when the phase structure of ABMS was cocontinuous with f_AN of 25 wt%. When f_AN was 25 wt% PEB-g-MAN domains have numerous small SAN domains in them, which was occlusion structure. Scanning electron microscopy (SEM) analysis indicated that the ABMS fracture surfaces had plastic flow visible, which looked like a craze fibers morphology, for the sample with highest impact strength (f_AN = 25 wt%). Dynamic mechanical thermal analysis (DMA) showed that the miscibility of the PEB phase and SAN phase improved after graft copolymerization of MMA and AN onto PEB.     

Theoretical calculations of spin-Hamiltonian parameters and defect structures for Cu2+ in trigonally-distorted tetrahedral sites of ZnO and GaN crystals

The spin-Hamiltonian (SH) parameters (g factors g _//, g ⊥ and hyperfine structure constants ⁶³ A _//, ⁶³ A ⊥, ⁶⁵ A _//, ⁶⁵ A ⊥) for Cu²⁺ ions in the trigonally-distorted tetrahedral sites of ZnO and GaN crystals are calculated from a complete diagonalization (of energy matrix) method (CDM) based on a two spin-orbit parameter model for d ⁹ ions in trigonal symmetry. In the method, the Zeeman and hyperfine interaction terms are added to the Hamiltonian in the conventional CDM. The calculated results are in good agreement with the experimental values. The calculated SH parameters are also compared with those using the traditional diagonalization method or perturbation method only within the ² T ₂ term. It appears that, for exact calculations of SH parameters of d ⁹ ions in trigonal tetrahedral clusters in crystals, the present CDM is preferable to the traditional diagonalization method or perturbation method within the ² T ₂ term. The local structures of Cu²⁺ centers (which differ from the corresponding structure in the host crystal) in ZnO : Cu²⁺ and GaN : Cu²⁺ are obtained from the calculations. The results are discussed.     

Preparation and characterization of vinyltriethoxysilane based inorganic–organic gel glasses dispersed 4′-n-pentyl-4-cyanobiphenyl nematic liquid crystal

Vinyltriethoxysilane based inorganic–organic glasses dispersed with 4′-n-pentyl-4-cyanobiphenyl nematic liquid crystal are designed to fabricate a new type of gel glass dispersed with liquid crystal. Scanning electron microscopy shows that the nematic liquid crystal phase, occupying the interconnected cavities, is continuously embedded in the inorganic–organic matrixes. The effect of the nematic liquid crystal weight concentration on the morphology is investigated. The differential scanning calorimetry shows that the nematic-isotropic transition temperature depends on the nematic liquid crystal weight concentration. The Raman spectra show that there are no obvious Raman frequency shifts, compared with pure nematic liquid crystal. The in situ diffuse reflectance FTIR spectra show that the integral intensity of bands of hydroxyls has not varied.     

Euler operator and homogeneous hida distributions

Let (S)⊄L ²(S′(∔),μ)⊄(S)^* be the Gel'fand triple over the white noise space (S′(∔),μ). Let (e _n ,n>-0) be the ONB ofL ²(∔) consisting of the eigenfunctions of the s.a. operator . In this paper the Euler operator Δ _E is defined as the sum , where ∂ _i stands for the differential operatorD _{e i}. It is shown that Δ _E is the infinitesimal generator of the semigroup (T _t ), where (T _t ϕ)(x)=ϕ(e ^t x) for ϕ∈(S). Similarly to the finite dimensional case, the λ-order homogeneous test functionals are characterized by the Euler equation: Δ _Eϕ =λ_ϕ. Via this characterization the λ-order homogeneous Hida distributions are defined and their properties are worked out. Supported by the National Natural Science Foundation of China.     

用楔形柱面光纤微透镜耦合的1.3μm SOA组件

运用激光模式耦合理论分析了半导体光放大器(SOA)与单模通信光纤的连接损耗,并设计制作了楔形柱面光纤微透镜用来实现两者的模斑匹配,有效地降低了器件的光耦合损耗.本文介绍了楔形柱面光纤微透镜耦合的1.3 μm半导体光放大器(SOA)组件及其制作方法.该组件的最大增益不小于14 dB,其偏振灵敏度小于1 dB,增益波动不大于0.5 dB.     

基于模糊PID算法的烘箱控制仿真分析

模糊算法能解决传统方法难以解决模型的不确定性、非线性、复杂等问题的任务,PID算法在定模型下控制稳态性能好,能消除静差等特点．结合这2种方法,提出模糊PID算法,应用于通用烘箱的温度控制,通过仿真分析,表明：对不同烘箱、不同环境下,用该算法控制,有高精度、超调量小,无需调节PID参数,具有智能控制等功能．     

The High Energy X-ray telescope (HE) onboard the Insight-HXMT astronomy satellite

The Insight-Hard X-ray Modulation Telescope(Insight-HXMT) is a broadband X-ray and γ-ray(1-3000 ke V) astronomy satellite. One of its three main telescopes is the High Energy X-ray telescope(HE). The main detector plane of HE comprises 18 Na I(Tl)/Cs I(Na) phoswich detectors, where Na I(Tl) is used as the primary detector to measure ~ 20-250 ke V photons incident from the field of view(FOV) defined by collimators, and Cs I(Na) is used as the active shielding detector to Na I(Tl) by pulse shape discrimination. Additionally, Cs I(Na) is used as an omnidirectional γ-ray monitor. The HE collimators have a diverse FOV,i.e. 1.1°×5.7°(15 units), 5.7°×5.7°(2 units), and blocked(1 unit). Therefore, the combined FOV of HE is approximately5.7°×5.7°. Each HE detector has a diameter of 190 mm resulting in a total geometrical area of approximately 5100 cm2, and the energy resolution is ~15% at 60 ke V. For each recorded X-ray event by HE, the timing accuracy is less than 10 μs and the deadtime is less than 10 μs. HE is used for observing spectra and temporal variability of X-ray sources in the 20-250 ke V band either by pointing observations for known sources or scanning observations to unveil new sources. Additionally, HE is used for monitoring the γ-ray burst in 0.2-3 Me V band. This paper not only presents the design and performance of HE instruments but also reports results of the on-ground calibration experiments.