Investigation of the effects of 24 bio-matrices on the LC-MS/MS analysis of morinidazole

This study compares and evaluates the effect of various matrices on liquid chromatography (LC) coupled with tandem mass spectrometry (MS/MS) analysis. Permanent post-column infusion (PCI) was used to quantify matrix effects. In this way, the suppressed or enhanced signal of the target material resulting from different co-eluting matrix components could be assessed. Twenty-four biological samples from in vivo and in vitro experiments were selected for this study. In addition, 7 sample components were further analyzed after sample preparation by protein precipitation. Multiple regression analysis was used to investigate the collinear relationship between matrix effects and co-eluted components at different time intervals. We found that salt was the dominant factor which impacted changes in signal detection. In order to eliminate it, we used ammonium formate as a modifier of the mobile phase which resulted in charge-state redistribution profiles so that a homogeneous matrix formed. By employing pulse gradient chromatography in the presence of 5 mM ammonium formate, favorable improvements of enhanced signal intensity and reduced matrix effects were obtained. These experiments also indicated the feasibility of using analogue IS during bio-analysis which contributed to an overall faster assay that would be suitable for drug discovery and development purposes.     

Synthesis, structures and magnetic properties of n=3 Ruddlesden-Popper compounds Ca4Mn3−xTaxO10 (0≤x≤0.3)

The structural and magnetic properties of Ta-doped Ca₄Mn_3−xTa_xO₁₀ (0≤x≤0.3) compounds have been investigated. Structural refinement indicates that the Ta doping maintains the orthorhombic layered perovskite structure with space group Pbca as Ca₄Mn₃O₁₀ but induces an increase in both unit cell volume and octahedral distortion. The magnetization measurements reveal that the magnetization first increases and reaches to maximum for the x=0.1 sample and then gradually decreases with the increase of Ta content. There appear short-range ferromagnetic (FM) clusters in all the doped samples, which are caused by the double-exchange interaction between Mn⁴⁺ and Mn³⁺ that is induced by the charge compensation effect. As x is higher than 0.1, the overall results show evidence for the gradual appearance of a cluster glass behavior. When x increases to 0.3, the long-range antiferromagnetic (AFM) ground state is melted into the short-range magnetically ordered regions due to the increase of Ta⁵⁺ and Mn³⁺ at the expense of Mn⁴⁺. The competition between AFM regions and FM clusters makes the short-range magnetic components frustrate when the temperature falls to a frustrating point, and thus cluster glass transition occurs.     

Derivatization and Determination of MCPA in Soil by GC

A reliable and sensitive method for determination of MCPA in soil by derivatization through p-toluenesulfonic acid and 1,3-dichloro-2-propanol followed by gas chromatographic detection under ECD mode has been established. After treatment with hydrochloric acid, the soil samples were directly extracted without any clean-up with dichloromethane by vortexing. After derivatization and liquid–liquid extraction, the product was subjected to GC analysis. Under optimized conditions, recovery of MCPA reached 87–91%; intra- and inter-day precision values were recorded in the range 3.4–6.4% and 7.4–8.7%, respectively. Excellent linear relationship was observed within 0.1–10 μg mL^?1 (0.005–0.5 mg kg^?1) with linear correlation coefficient (R) of 0.9997. The LOD and LOQ were 0.001 and 0.0026 mg kg^?1, respectively, and the overall sensitivity for detection was found to be in the same range as with the conventional GC-MS technique.     

High-Level Expression and Efficient Purification of Bioactive Swollenin in <Emphasis Type="Italic">Aspergillus oryzae</Emphasis>

The bioactivity of swollenin is beneficial to cellulose decomposition by cellulase despite the lack of hydrolytic activity itself. In order to improve the productivity of swollenin, the effects of culture conditions on the expression level in recombinant Aspergillus oryzae were investigated systematically. With regard to the bioactivity of swollenin, glycerin and peanut meal were the optimal carbon or nitrogen source, respectively. The highest level production of swollenin (50 mg L⁻¹) was attained after 88 h cultivation with the initial pH of 5.6 in the culture medium. Then the soluble swollenin was effectively purified from the cultural supernatant by ammonium sulfate precipitation and cationic exchange chromatography with recovery yield of 53.2%. The purified swollenin was fully bioactive due to its strong synergistic activity with cellulose.     

Biodiesel Preparation from Jatropha curcas Oil Catalyzed by Hydrotalcite Loaded With K2CO3

This paper discusses the synthesis of biodiesel catalyzed by solid base of K₂CO₃/HT using Jatropha curcas oil as feedstock. Mg–Al hydrotalcite was prepared using co-precipitation methods, in which the molar ratio of Mg to Al was 3:1. After calcined at 600 °C for 3 h, the Mg–Al hydrotalcite and K₂CO₃ were grinded and mixed according to certain mass ratios, in which some water was added. The mixture was dried at 65 °C, and after that it was calcined at 600 °C for 3 h. Then, this Mg–Al hydrotalcite loaded with potassium carbonate was obtained and used as catalyst in the experiments. Analyses of XRD and SEM characterizations for catalyst showed the metal oxides formed in the process of calcination brought about excellent catalysis effect. In order to achieve the optimal technical reaction condition, five impact factors were also investigated in the experiments, which were mass ratio, molar ratio, reaction temperature, catalyst amount and reaction time. Under the best condition, the biodiesel yield could reach up to 96%.     

Lanthanide/zinc centered photoactive hybrids with functional sulfonamide linkage: Coordination bonding assembly,characterization and photophysical properties

In this paper, two novel kinds of organic–inorganic monomer, SUA-APEMS and SUA-APS, have been achieved by modifying 5-sulfosalicylic acid (SUA) with 3-aminopropyl-methyl-diethoxylsilane (APEMS) and 3-aminopropyl trimethoxysilane (APS). These two organic–inorganic monomers were used as multi-functional bridged components, which can coordinate to metal ions (Tb³⁺/Eu³⁺/Zn²⁺) with carbonyl groups, strongly absorb ultraviolet and effectively transfer energy to metal ions through their triplet excited state, as well as involve in the sol–gel process with inorganic host precursor tetraethoxysilane (TEOS), resulting two series of molecular hybrid materials (named as SUA-APEMS/APS-RE) with double chemical bond (RE(Zn)–O coordination bond and Si–O covalent bond). The effective intra-molecular energy transfer process gives rise to the characteristic emission of metal ions and the chemical bond make the hybrid materials owning better properties.     

Quantum dots sensitized graphene: In situ growth and application in photoelectrochemical cells

A novel photoelectrochemical cells (PEC) based on quantum dots (QDs) sensitized graphene for light harvesting and energy conversion was described in this work. QDs sensitized graphene was prepared by in situ growth of QDs on noncovalently functionalized graphene. QDs sensitized graphene photoelectrodes showed enhanced photocurrent generation capability and incident photon-to-electron conversion efficiency (IPCE) at visible light, and could also be an efficient platform for other optoelectronic applications.     

Thermal properties and liquid crystallinity of side-chain azobenzene copolymer containing pendant polyhedral oligomeric silsequioxanes

Vinylated polyhedral oligomeric silsesquioxane (POSS-M) was prepared by the reaction of POSS containing amine groups with acrylic acid. Azobenzene liquid crystalline copolymer (LCP-POSS) was then synthesized with 6.0 mol% POSS-M and 94.0 mol% acrylate monomer containing azobenzene liquid crystalline moiety (Azo-M) by free-radical copolymerization. Homopolymer of Azo-M (LCP) was also synthesized under the same conditions. Their thermal properties and liquid crystallinity were characterized by Thermal gravimetric analysis (TG), differential scanning calorimetry (DSC), Wide-angle X-ray diffraction experiments (XRD) and polarized optical micrographs (POM). The results showed that LCP-POSS has higher thermal stability and glass transition temperature than pure LCP due to the incorporation of the rigid cage-like POSS. Especially, LCP-POSS exhibits enantiotropic smectic and nematic liquid crystalline behaviors, its smectic-nematic transition temperature (T _SN) and nematic-isotropic transition temperature (T _NI) are higher than those of pure LCP, which may promote and extend its applications on stimuli-responsive materials and devices.     

Quantitative coherence analysis with an X-ray Talbot–Lau interferometer

Differential phase-contrast (DPC) X-ray imaging has been performed in the Talbot–Lau configuration, in which the X-ray source was a combination of an absorption grating and a laboratory X-ray generator. We report here quantitative analysis of partial coherence effects on the X-ray Talbot–Lau interferometer. Based on the visibility of the self-image, the well-known geometry condition is reproduced. It is shown that effects of partial coherence are determined by the opening ratio of the source grating, and that the effects are independent of the Talbot order and the type of the phase grating, a condition quite different from those in a Talbot interferometer. A possible explanation is discussed from the point of view of the effective spatial coherence length. Taking into account the available X-ray flux and experimental fluctuations, we present the optimum opening ratio. Furthermore, we mention that our results can also be successfully used to discuss the properties of a multiline X-ray source.