Formation of a novel electroactive film by electropolymerization of 5-amino-1-naphthol

The electrooxidation of 5-amino-1-naphthol in acetonitrile solutions led to the formation of a purplish gray, air-stable, polymeric film (poly(5-amino-1-naphthol), poly(5,1-ANT)), which presents a nonfibrillar morphology, on basal-plane pyrolytic graphite and In-Sn oxide conducting glass (ITO) electrodes. The film showed a reversible, well-defined oxidation-reduction response in both aqueous solutions of pH 1–13 and protic non-aqueous solutions, and was semiconducting. The formal redox potential (E^o') was 0.075 V vs. a sodium chloride saturated calomel electrode in 0.2 M NaClO₄ aqueous solution (pH 1.0). The pH dependence of (E^o') suggested that the electrode processes at pH 1-5 and pH 8–13 are 1e⁻ − 1H⁺and 1e^t- − 2 H⁺ reactions, respectively. The poly(5,1-ANT) film-coated ITO electrode displayed an electrochromic character: the oxidized form is purplish gray and the reduced one is pale brownish yellow. In addition, based on the electrochemical and IR absorption spectroscopic characterization of the film, some possible candidates for the structures of electroactive moieties of poly(5,1-ANT) are proposed.     

Torsional angular dependence of 1J(Se,Se) and Fermi contact control of 4J(Se,Se): analysis of nJ(Se,Se) (n=1-4) based on molecular orbital theory

(n)J(Se,Se) (n=1-4) nuclear couplings between Se atoms were analyzed by using molecular orbital (MO) theory as the first step to investigating the nature of bonded and nonbonded (n)J(Se,Se) interactions between Se atoms. The values were calculated by employing Slater-type triple xi basis sets at the DFT level, which were applied to structures optimized with the Gaussian 03 program. The contribution from each occupied MO (psi(i)) and psi(i)-->psi(a) (psi(a)=unoccupied MO) transition was evaluated separately. 1J(Se,Se) was calculated for the MeSeSeMe model compound, which showed a typical dependence on the torsion angle (phi(C(Me)SeSeC(Me))). This dependence explains the small values (< or =64 Hz) of 1Jobsd(Se,Se) observed for RSeSeR' and large values (330-380 Hz) of 1Jobsd(Se,Se) observed for 4-substituted naphtho[1,8-c,d]-1,2-diselenoles, which correspond to synperiplanar diselenides. The HOMO-->LUMO and HOMO-1-->LUMO transitions contribute the most to 1J(Se,Se) at phi=0 and 180 degrees to give large values of 1J(Se,Se), whereas various transitions contribute and cancel each other out at phi=90 degrees to give small values of 1J(Se,Se). Large 4Jobsd(Se,Se) values were also observed in the nonbonded Se...Se, Se...Se=O, and O=Se...Se=O interactions at naphthalene 1,8-positions. The Fermi contact (FC) term contributes significantly to 4J(Se,Se), whereas the paramagnetic spin-orbit (PSO) term contributes significantly to 1J(Se,Se). 2J(Se,Se) and 3J(Se,Se) were analyzed in a similar manner and a torsional angular dependence was confirmed for 3J(Se,Se). Depending on the structure, the main contribution to (n)J(Se,Se) (n=2, 3) is from the FC term, with a lesser contribution from the PSO term. Analysis of each transition enabled us to identify and clearly visualize the origin and mechanism of the couplings.     

Mineral oil certified reference materials for the determination of polychlorinated biphenyls from the National Metrology Institute of Japan (NMIJ)

Four mineral oil certified reference materials (CRMs), NMIJ CRM 7902-a, CRM 7903-a, CRM 7904-a, and CRM 7905-a, have been issued by the National Metrology Institute of Japan, which is part of the National Institute of Advanced Industrial Science and Technology (NMIJ/AIST), for the determination of polychlorinated biphenyls (PCBs). The raw materials for the CRMs were an insulation oil (CRM 7902-a and CRM 7903-a) and a fuel oil (CRM7904-a and CRM 7905-a). A solution of PCB3, PCB8, and technical PCB products, comprising four types of Kaneclor, was added to the oil matrices. The total PCB concentrations in the PCB-fortified oils (CRM 7902-a and CRM 7904-a) are approximately 6 mg kg⁻¹. In addition, the mineral oils which were not fortified with PCBs were also distributed as CRMs (CRM 7903-a and CRM 7905-a). Characterization of these CRMs was conducted by the NMIJ/AIST, where the mineral oils and the PCB solution were analyzed using multiple analytical methods such as dimethylsulfoxide extraction, normal-phase liquid chromatography, gel permeation chromatography, reversed-phase liquid chromatography, and chromatography using sulfoxide-bonded silica; and/or various capillary columns for gas chromatography, and two ionization modes for mass spectrometry. The target compounds in the mineral oils and those in the PCB solution were determined by one of the primary methods of measurement, isotope dilution–mass spectrometry (ID-MS). Certified values have been provided for 11 PCB congeners (PCB3, 8, 28, 52, 101, 118, 138, 153, 180, 194, and 206) in the CRMs. These CRMs have information values for PCB homologue concentrations determined by using a Japanese official method for determination of PCBs in wastes and densities determined with an oscillational density meter. Because oil samples having arbitrary PCB concentrations between respective property values of the PCB-fortified and nonfortified CRMs can be prepared by gravimetric mixing of the CRM pairs, these CRMs can be used for validation of PCB analyses using various instruments which have different sensitivities. Figure Preparation and certification processes of the mineral oil CRMs (example shown is polychlorinated biphenyls in insulation oil, high/low concentrations) Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Behavior of Halogen Bonds of the Y−X⋅⋅⋅π Type (X,Y=F,Cl, Br,I) in the Benzene π System,Elucidated by Using a Quantum Theory of Atoms in Molecules Dual‐Functional Analysis

The nature of halogen bonds of the Y?X‐?‐π(C₆H₆) type (X, Y=F, Cl, Br, and I) have been elucidated by using the quantum theory of atoms in molecules (QTAIM) dual‐functional analysis (QTAIM‐DFA), which we proposed recently. Asterisks (?) emphasize the presence of bond‐critical points (BCPs) in the interactions in question. Total electron energy densities, H_b( r _c), are plotted versus H_b( r _c)?V_b( r _c)/2 [=(?²/8m)?²ρ_b( r _c)] for the interactions in QTAIM‐DFA, in which V_b( r _c) are potential energy densities at the BCPs. Data for perturbed structures around fully optimized structures were used for the plots, in addition to those of the fully optimized ones. The plots were analyzed by using the polar (R, θ) coordinate for the data of fully optimized structures with (θ_p, κ_p) for those that contained the perturbed structures; θ_p corresponds to the tangent line of the plot and κ_p is the curvature. Whereas (R, θ) corresponds to the static nature, (θ_p, κ_p) represents the dynamic nature of the interactions. All interactions in Y?X‐?‐π(C₆H₆) are classified by pure closed‐shell interactions and characterized to have vdW nature, except for Y?I‐?‐π(C₆H₆) (Y=F, Cl, Br) and F?Br‐?‐π(C₆H₆), which have typical hydrogen‐bond nature without covalency. I?I‐?‐π(C₆H₆) has a borderline nature between the two. Y?F‐?‐π(C₆H₆) (Y=Br, I) were optimized as bent forms, in which Y‐?‐π interactions were detected. The Y‐?‐π interactions in the bent forms are predicted to be substantially weaker than those in the linear F?Y‐?‐π(C₆H₆) forms.     

Heterogeneous Pd/C-catalyzed ligand-free, room-temperature Suzuki-Miyaura coupling reactions in aqueous media

A mild and efficient ligand-free Suzuki-Miyaura coupling reaction catalyzed by heterogeneous Pd/C was developed. Aryl bromides and triflates undergo the cross-coupling with aryl boronic acids in excellent yields without the presence of any additives in aqueous media at room temperature. Aryl vinyl boronic acids are also applicable to this coupling reaction and provide the trans-stilbene derivatives in high yields. The application of wet-type Pd/C to the coupling reaction was achieved without any loss of activity under aerobic conditions, and the reuse of Pd/C is feasible for a fifth run without significant loss of activity. Inductively coupled plasma (ICP) mass-spectrometric analysis of the filtrate from the reaction mixture of 4-bromonitrobenzene with phenylboronic acid demonstrated that the palladium metal hardly leached into the solution within the limits of the detector (<1 ppm), thus suggesting that the present Suzuki-Miyaura reaction proceeded by heterogeneous catalysis.     

Oligometallic template strategy for ring-closing olefin metathesis: highly cis- and trans-selective synthesis of a 32-membered macrocyclic tetraoxime

An oligometallic template effect was observed on the cis/trans selectivity of a 32-membered macrocyclic tetraoxime in ring-closing olefin metathesis of an acyclic diallyl derivative H4L; the metathesis of heterotrinuclear complex LZn2M (M=Ca2+, La3+) afforded the cis isomer, whereas uncomplexed H4L gave the trans isomer.     

Denaturation of alpha-lactalbumin and ubiquitin studied by electrospray and laser spray

Electrospray and laser spray mass spectra of human alpha-lactalbumin and bovine ubiquitin were studied, with an emphasis on the denaturation induced by laser spray. There were no remarkable differences in the electrospray and laser spray mass spectra for acidic and basic aqueous solutions of alpha-lactalbumin in positive and negative modes of operations. This originates from the fact that this protein is tightly folded with four disulfide bonds. For ubiquitin, however, denaturation was induced by laser spray for the positive mode of operation and the [M+nH](n+) with a maximum of n = 13 was observed, i.e., all the acidic amino acid residues are fully neutralized (protonated). In contrast, the laser-induced denaturation was not observed for the negative mode of operation, i.e., denaturation of ubiquitin is largely suppressed in the negatively charged liquid droplets. The marked difference observed in the positive and negative modes of operations for ubiquitin is ascribed to the difference in the susceptibility of side-chain/main-chain interactions in the positive-ion excess and in the negative-ion excess liquid droplets. That is, the interactions between the basic residues and main-chain amide carbonyl groups (-NH(3) (+)***O=C< or -NH(2)***O=C<) which play an important role in stabilizing the protein structures are not so affected in the negative mode of operation but are weakened in the positive mode of operation.     

Dynamic and static behaviors of N-Z-N σ(3c-4e) (Z = S, Se, and Te) interactions: atoms-in-molecules dual functional analysis with high-resolution X-ray diffraction determination of electron densities for 2-(2-pyridylimino)-2H-1,2,4-thiadiazolo[2,3-a]pyridine

The structure of 2-(2-pyridylimino)-2H-1,2,4-thiadiazolo[2,3-a]pyridine (NSN) indicates that the molecule has a planar geometry with a linear N···S···N linkage, creating a tetracyclic structure of the formal C(2v) symmetry. To clarify the nature of the NSN σ(3c-4e) bonding, together with the related NSeN and NTeN, the dynamic and static behaviors are investigated by applying atoms-in-molecules (AIM) dual functional analysis to both the fully optimized and perturbed structures. The structures were optimized computationally, retaining C(2v) symmetry. All bond critical points are detected as expected and exhibited on both sides of the N···Z···N moiety which supports the formation of NZN σ(3c-4e). It is confirmed that N···S···N is of the covalent nature close to Me(2)S(+)-?-Cl or Me(2)Se(+)-?-Br, whereas N···Se···N and N···Te···N have the (regular) CS nature close to the CT adducts of Me(2)S(-?-Cl)(2) (TBP) and Me(2)Se-?-Br(2) (MC), respectively. An experimental high-resolution charge density determination has been performed on NSN, which thoroughly supports the theoretical results. Very similar results are obtained in the analogous pyrimidyl derivatives for N···S···N, N···Se···N, and N···Te···N. AIM dual functional analysis, as validated by experimental high-resolution charge densities, is thus confirmed to be an excellent method to elucidate the nature of these interactions.