Preparation of highly dispersible and tumor-accumulative, iron oxide nanoparticles Multi-point anchoring of PEG-b-poly(4-vinylbenzylphosphonate) improves performance significantly

This paper describes the preparation of iron oxide nanoparticles, surface of which was coated with extremely high immobilization stability and relatively higher density of poly(ethylene glycol) (PEG), which are referred to as PEG protected iron oxide nanoparticles (PEG-PIONs). The PEG-PIONs were obtained through alkali coprecipitation of iron salts in the presence of the PEG-poly(4-vinylbenzylphosphonate) block copolymer (PEG-b-PVBP). In this system, PEG-b-PVBP served as a surface coating that was bound to the iron oxide surface via multipoint anchoring of the phosphonate groups in the PVBP segment of PEG-b-PVBP. The binding of PEG-b-PVBP onto the iron oxide nanoparticle surface and the subsequent formation of a PEG brush layer were proved by FT-IR, zeta potential, and thermogravimetric measurements. The surface PEG-chain density of the PEG-PIONs varied depending on the [PEG-b-PVBP]/[iron salts] feed-weight ratio in the coprecipitation reaction. PEG-PIONs prepared at an optimal feed-weight ratio in this study showed a high surface PEG-chain surface density (≈0.8 chainsnm(-2)) and small hydrodynamic diameter (<50 nm). Furthermore, these PEG-PIONs could be dispersed in phosphate-buffered saline (PBS) that contains 10% serum without any change in their hydrodynamic diameters over a period of one week, indicating that PEG-PIONs would provide high dispersion stability under in vivo physiological conditions as well as excellent anti-biofouling properties. In fact we have confirmed the prolong blood circulation time and facilitate tumor accumulation (more than 15% IDg(-1) tumor) of PEG-PIONs without the aid of any target ligand in mouse tumor models. The majority of the PEG-PIONs accumulated in the tumor by 96 h after administration, whereas those in normal tissues were smoothly eliminated by 96 h, proving the enhancement of tumor selectivity in the PEG-PION localization. The results obtained here strongly suggest that originally synthesized PEG-b-PVBP, having multipoint anchoring character by the phosphonate groups, is rational design for improvement in nanoparticle as in vivo application. Two major points, viz., extremely stable anchoring character and dense PEG chains tethered on the nanoparticle surface, worked simultaneously to become PEG-PIONs as an ideal biomedical devices intact for prolonged periods in harsh biological environments.     

Fluorous solvent for cell culture

Incubation of mouse melanoma B16 cells in fluorous solvents with low boiling point such as perfluoromethylcyclohexane, 1,1,1,3,3,3-hexafluoro-2-propanol, ethylpentafluoropropionate resulted in cell death. However, cells lived up to 2 days in fluorous alcohols such as 2,2,3,3,4,4,5,5-octafluoro-1-pentanol and 3,3,4,4,5,5,6,6,6-nonafluoro-1-hexanol with relatively higher fluorine content. Remarkably, cells survived deprived of nutrition up to 4 days when incubated in 2,2,3,3,4,4,5,5,6,6,6-undecafluoro-1-hexanol or in 2,2,3,3,4,4,5,5,6,6,7,7-dodecafluoroheptanol that have the most number of fluorine atoms (11 and 12, respectively) among the perfluoroalkyl alcohols used, and with boiling points of 128 °C and 169 °C, respectively.     

Preparation of flexible and transparent polylactic acids films by crystallization manipulation

Highly flexible and transparent polylactic acids (PLAs) films were successfully prepared by manipulating their crystallization. The semicrystalline poly(L ‐lactic acid) (L) was blended with a noncrystalline poly(DL ‐lactic acid) (DL) together with diglycerol tetraacetate (DGTA). Optimal DGTA content to plasticize PLAs was about 17%. Addition of DL hindered the crystallization of the films. Tensile strengths of the films having DL content more than 5% were about 10 MPa while the elongations at break were boosted as DL content increased. Films having L/DL ratio of 50/50 showed elongations at break of 270%. Stretch ability and clarity of films containing 15–50% DL were fair although they were subjected to annealing at 60 °C for 1 h. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6489–6495, 2008     

Stability analysis for double-stranded DNA oligomers and their noncovalent complexes with drugs by laser spray

Laser spray, which is a newly developed ionization technique, can characterize the stability of noncovalent complexes in the solution phase. By using this advantage, laser spray has been applied to probe the intrinsic stability of double-stranded DNA (dsDNA) sequences and their binding affinities with various drugs in the solution phase. Systematic experiments were carried out using six 16-mer and three 22-mer dsDNA oligomers, together with the complexes of the 16-mer dsDNA with minor groove binders: berenil, Hoechst 33342, DAPI, and netropsin. Dissociation curves for each dsDNA or each complex were plotted as a function of laser power. The laser power (E50%), where 50% of each dsDNA or each complex was dissociated, was compared with its melting temperature (Tm) determined by UV spectroscopy. Linear correlations between E50% and Tm were obtained not only for the dsDNA oligomers (correlation factor r = 0.9835) but also for the 16-mer dsDNA complexes with minor groove binders (r = 0.9966). In addition, laser spray has successfully clarified the binding affinities of a 16-mer dsDNA with two intercalators: daunomycin and nogalamycin. In the case of the dsDNA-daunomycin complex, by changing the molar ratio of dsDNA : drug from 1 : 1 to 1 : 5, the concentration-dependent stability of the complex was confirmed by laser spray. The present results demonstrate that laser spray mass spectrometry can be a powerful and convenient method to investigate the relative binding affinities of dsDNA-ligand complexes in the solution phase, which could be applied to the early stage of high-throughput screening of drugs targeting for dsDNA.     

Controlled deposition of calcium carbonate particles on porous membranes by using alternating current system

The deposition of calcium carbonate particles in the absence of additives was performed through the application of an alternating current. Solutions of calcium chloride and sodium carbonate were filled in glass cells, and a porous polymer membrane was interposed between the glass cells. An alternating current with a sine waveform (frequency: 10 Hz) was applied by using a platinum electrode. In this process, the reciprocal migration of calcium and carbonate ions toward the interface of the pores on the membrane takes place. Moreover, ion mixing occurs to a small extent at the interface of the pores. An alternating current was applied for 30 min during which the ion mixing continued. When observed using a scanning electron microscope, a majority of the formed calcium carbonate particles was found to exhibit a spheroidal vaterite crystal structure. This crystal structure was confirmed to be vaterite after characterization by X-ray diffraction. In the absence of an alternating current, only calcite was formed on the porous polymer membrane. Taking this result into account, it was concluded that the alternating current could induce reciprocal ion migration through the pores of the membrane, and vaterite deposition can be achieved. This is one of the methods employed for the calcium carbonate formation on the porous membrane by using an alternating current system.     

Fabrication of novel layer-by-layer assembly films composed of poly(lactic acid) and polylysine through cation-dipole interactions

Novel layer-by-layer (LbL) assembly films composed of poly( L-lysine) (PLL) and poly( D-lactic acid) (PDLA) were prepared by the alternate immersion of a gold substrate into an aqueous PLL solution and an acetonitrile solution of PDLA. The formation of the LbL assembly film was confirmed by quartz crystal microbalance (QCM) analysis, atomic force microscopy observation, and attenuated total reflection Fourier transform infrared spectroscopy measurement. The driving force responsible for the LbL assembly was determined by investigating the formation behavior of the LbL assembly under various conditions. The formation of the LbL assembly was not affected either by the stereochemistry of polylysine and poly(lactic acid) or by the addition of urea, which is known to inhibit hydrogen bonding interaction between polymers, into the aqueous PLL solution. The LbL assembly was also formed by the combination of PDLA and polycations other than polylysine, such as poly(diallyldimethylammonium chloride). On the other hand, the combination of PDLA and any polyanions such as poly(styrene sulfonate sodium salt) produced little corresponding LbL assembly. The increase in positive charge on the amino nitrogen atom of PLL enhanced the LbL assembly. These results suggest that the LbL assembly film composed of PLL and PDLA was fabricated by cation-dipole interactions between the positive charge on the amino nitrogen atom of PLL and the lone pairs of the carbonyl oxygen atom of PDLA.     

Synthesis, structures, and magnetic properties of face-sharing heterodinuclear Ni(II)-Ln(III) (Ln = Eu, Gd, Tb, Dy) complexes

Heterodinuclear [(Ni (II)L)Ln (III)(hfac) 2(EtOH)] (H 3L = 1,1,1-tris[(salicylideneamino)methyl]ethane; Ln = Eu, Gd, Tb, and Dy; hfac = hexafluoroacetylacetonate) complexes ( 1.Ln) were prepared by treating [Ni(H 1.5L)]Cl 0.5 ( 1) with [Ln(hfac) 3(H 2O) 2] and triethylamine in ethanol (1:1:1). All 1.Ln complexes ( 1.Eu, 1.Gd, 1.Tb, and 1.Dy) crystallized in the triclinic space group P1 (No. 2) with Z = 2 with very similar structures. Each complex is a face-sharing dinuclear molecule. The Ni (II) ion is coordinated by the L (3-) ligand in a N 3O 3 coordination sphere, and the three phenolate oxygen atoms coordinate to an Ln (III) ion as bridging atoms. The Ln (III) ion is eight-coordinate, with four oxygen atoms of two hfac (-)'s, three phenolate oxygen atoms of L (3-), and one ethanol oxygen atom coordinated. Temperature-dependent magnetic susceptibility and field-dependent magnetization measurements showed a ferromagnetic interaction between Ni (II) and Gd (III) in 1.Gd. The Ni (II)-Ln (III) magnetic interactions in 1.Eu, 1.Tb, and 1.Dy were evaluated by comparing their magnetic susceptibilities with those of the isostructural Zn (II)-Ln (III) complexes, [(ZnL)Ln(hfac) 2(EtOH)] ( 2.Ln) containing a diamagnetic Zn (II) ion. A ferromagnetic interaction was indicated in 1.Tb and 1.Dy, while the interaction between Ni (II) and Eu (III) was negligible in 1.Eu. The magnetic behaviors of 1.Dy and 2.Dy were analyzed theoretically to give insight into the sublevel structures of the Dy (III) ion and its coupling with Ni (II). Frequency dependence in the ac susceptibility signals was observed in 1.Dy.     

Graft copolymers having hydrophobic backbone and hydrophilic branches. XXX. Preparation of polystyrene‐core nanospheres having a poly(2‐methacryloyloxyethyl phosphorylcholine) corona

Polystyrene core nanosphere particles possessing 2‐methacryloyloxyethyl phosphorylcholine (MPC) polymers on the corona were prepared by the free radical polymerization of hydrophilic polyMPC macromonomer and hydrophobic styrene with AIBN as a radical initiator in ethanol as a polar solvent. The morphology of the nanospheres was observed by transmission electron micrograph (TEM). The nanospheres were spherical in form and have a narrow size distribution. Their sizes could be controlled by varying the molecular weight of the macromonomer and the amount of it in feed. Electron spectroscopy for chemical analysis (ESCA) of the nanosphere surfaces suggested that polyMPC chains were located favorably on the surface of the nanosphere. The nanospheres having the polyMPC chains on their surfaces can be significant and useful materials in technological and medical fields. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3052–3058, 2000     

Nanosphere formation in copolymerization of methyl methacrylate with poly(ethylene glycol) macromonomers

Polymeric nanospheres consisting of poly(methyl methacrylate) (PMMA) cores and poly(ethylene glycol) (PEG) branches on their surfaces were prepared by free radical copolymerization of methyl methacrylate (MMA) with PEG macromonomers in ethanol/water mixed solvents. PEG macromonomers having a methacryloyl (MMA‐PEG) and p‐vinylbenzyl (St‐PEG) end group were used. It has become clear that the obtained polymer dispersions form three kinds of states, particle dispersion (milky solution), clear solution, and gel/precipitation. It was found that the reaction parameters such as MMA concentration, molecular weight, and concentration of PEG macromonomers, and water content can affect nanosphere formation in a copolymerization system. The water volume fraction of mixed ethanol/water solvents affected the particle size of the nanospheres. These differences in the formation of nanospheres were due to the solvophilic/solvophobic balance between the copolymers and solvents during the self‐assembling process of the copolymers. The sizes of nanospheres can be controlled by varying concentration of PEG macromonomer and water content in solvents. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1811–1817, 2000