光电稳定／跟踪平台的干扰力矩自动化检测识别

以光电稳定／跟踪平台为研究对象,通过对光电稳定／跟踪平台中存在的各种干扰力矩的力学特性进行分析和研究,提出一种新的测量稳定平台干扰力矩的方法。该方法能够实现干扰力矩的自动测量与识别,且具有较高的测量精度。通过实验,验证了该方法的可行性和优越性。     

新鞣花酸衍生物的NMR归属

从鞣花酸(1)合成二个新的多取代的联苯化合物3和4,利用HMQC,HMBC和一维NOE谱技术确定了它们的¹³C和¹H NMR归属.     

一种带有陷波单元的高温超导滤波器设计

提出了一种带有陷波单元的新型高温超导滤波器设计结构,在输入、输出馈线附近设置陷波单元对特定频率产生陷波作用,在滤波器的传输特性上成传输零点,提高了滤波器设计的灵活性,基于这种新型结构设计了高边缘陡峭度滤波器和邻频双通带滤波器.     

Online data quality monitoring system at BESⅢ

The online Data Quality Monitoring (DQM) tool plays an important role in the data recording process of HEP experiments. The BESⅢ DQM collects data from the online data flow, reconstructs them with offline reconstruction software and automatically analyzes the reconstructed data with user-defined algorithms. The DQM software is a scalable distributed system. The monitored results are gathered and displayed in various formats, which provides the shifter with current run information that can be used to identify problems quickly. This paper gives an overview of the DQM system at BESⅢ.     

氧分子的价壳层光学振子强度研究

在入射电子能量为1500eV、平均散射角为0°、能量分辨为60meV条件下，得到了氧分子在5.7—28.5eV能量区间的光学振子强度密度谱，获得了氧分子E³Σ^-_ｕ的ν′=0，1，2和2³Π_ｕ的ν′=0，1各振动能级的绝对光学振子强度，同时检验了我们的Bethe-Born转换因子外推到低能端的可靠性．将所得结果与前人的工作进行了比     

Quantum Phase Transition in Quasi-two-dimensional Heisenberg Antiferromagnet with Single-Ion Anisotropy

In the present paper, we investigate the quantum phase transition in a spatially anisotropic antiferrornagnetic Heisenberg model of S =1 with single-ion energy anisotropy. By using the Schwinger boson representation, we calculate the Gaussian correction to the critical value J⊥^c caused by quantum spin fluctuations. We find that, for the positive single-ion energy, a nonzero value of J⊥^c is always needed to stabilize the antiferromagnetic long-range order in this model. It resolves a difference among literature and shows clearly that the effect of quantum fluctuations may qualitatively change a result obtained by the mean-field theories on lower-dimensional systems.     

银基带再结晶织构的EBSD分析

本文采用EBSD(电子背散射衍射)等分析手段对{110}<110>取向的银基带的织构形成机理进行了深入研究,发现了冷轧织构与不同退火温度下再结晶织构间的取向转变关系,研究发现,{110}面附近且非{110}<211>取向的冷轧织构组分,900℃退火可以转变为强的{110}<110>织构.织构转变中有孪晶形成,{110}<110>和{110}<114>取向互为孪晶关系.     

YBCO涂层导体用Ni5W基带的制备和立方织构的发展

为了制作能满足YBCO涂层导体（coated conductor）所需要的高强度、低磁性的立方织构基带，本工作用粉末冶金方法制作了Ni-5at％W合金基带．为评估基带中立方织构的发展，用March-Dollase函数对各种热处理样品的择优取向度进行了研究，结果与用X射线极图法和电子背散射衍射法得到的结果基本一致．研究结果表明，在实验中所用的工艺参数范围内，随总加工率和热处理温度的提高，基带中立方织构百分数明显增高．提高总加工率实际增加了冷加工样品中立方织构晶粒或立方核心的数量．实验中得到了较好的和实用的工艺制度，用这种工艺可以制作出具有99％～100％立方织构百分数，并具有很好一致取向度的Ni5W基带．     

半绝缘GaAs的欧姆接触电极材料Ag/Co掺杂的非晶碳膜制备与检测

稳定的欧姆接触对半导体器件的正常工作起到至关重要的作用.目前市场上主要采用金/金锗镍合金作为n型GaAs的电极材料,工艺复杂,成本高昂.本文研究了一种新型的、廉价的适用于半绝缘GaAs的欧姆接触电极材料Ag/Co掺杂的非晶碳膜及其制备过程,以便于读者对半导体器件的制备工艺和流程有所了解.     

Conditional Symmetries and Solutions to a Class of Nonlinear Diffusion-Convection Equations

The present paper discusses a class of nonlinear diffusion-convection equations with source. The method that we use is the conditional symmetry method. It is shown that the equation admits certain conditional symmetries for coefficient functions of the equations. As a consequence, solutions to the resulting equations are obtained.