Combination of developed in-house method and application of Eichrom Sr resin to determine the radioactivity of <Superscript>90</Superscript>Sr in environmental sample

A method is described for the determination of ⁹⁰Sr in environmental samples using combination of developed in-house method, Eichrom Sr resin and Beta Counter. Strontium was efficiently, rapidly and simply separated from Ca and other interfering matrix components by Eichrom Sr resin. All the results in general showed good accuracy, high precision, reliable and in good agreement between these two measured and certified value of SRM (i.e. IAEA-375, IAEA-326, IAEA-152 and IAEA-414). As a whole, the procedure described in this work notably improves conventional methods in particular concerning the time needed, sample volume, safer and others. Thus, the introduced method was successfully performed and will be applied to actual sample for the determination of ⁹⁰Sr in different environmental materials such as soil, sediments, milk, biological sample, water etc.     

Preliminary Evaluation of Supercritical Carbon Dioxide Extracted Dabai Pulp Oleoresin as a New Alternative Fat

There has been growing interest among food scientists in producing a toxin-free fat as an end product with varying physical or nutritional properties of interest to the food industry. Oleoresin is a rich source of bioactive compounds which consumers can easily add to a large variety of food. Dabai (Canarium odontophyllum) pulp oleoresin (DPL) was extracted using supercritical carbon dioxide (SC-CO₂) extraction, a green extraction technology. This study investigates the quality of SC-CO₂ extracted DPL in discovering its potential as a new alternative fat. The extraction experiment was carried out at a pressure of 40 MPa and a temperature of 40 °C. DPL is a saturated fatty acid (SFA)-rich fat due to its high SFA composition (47.72 ± 0.01%). In addition, the low content of peroxide value (PV) (5.60 ± 0.09 mEq/kg) and free fatty acids (FFA) (3.40 ± 0.03%) indicate the quality and stability of DPL for various applications besides food consumption. DPL also has a low slip melting point (SMP) (20.20 ± 0.03 °C), and HPLC-FID revealed that DPL contained 0.13 ± 0.02 mg/100 g of vitamin E (α-tocopherol), indicating its potential application as a solid fat with a bioactive compound. This present work demonstrates the possible prospect of DPL in the formulation of end products for food industries.     

One-step electrochemical deposition of thin film titanium suboxide in basic titanyl sulfate solution at room temperature

Journal of Solid State Electrochemistry - This study reports direct electrodeposition of TiOx thin films on ITO substrate from an acetonitrile solution containing titanyl sulfate and tetra n-butyl...     

Performance of different crystal structures of PbO2 on electrochemical degradation of phenol in aqueous solution

Phenol degradation was carried out in acidic aqueous solution on different crystal structures of PbO₂ surfaces at room temperature. Phenol, benzoquinone and maleic acid concentrations were monitored during the electrolysis process. It was determined that β surfaces have higher performance than surfaces on phenol degradation. Then, the effect of crystallinities of pure β-PbO₂ surfaces was investigated and found that higher crystallinity increased the efficiency of the phenol degradation process.     

Metal-enhanced fluorescence using anisotropic silver nanostructures: critical progress to date

In this critical and timely review, the effects of anisotropic silver nanostructures on the emission intensity and photostability of a key fluorophore that is frequently used in many biological assays is examined. The silver nanostructures consist of triangular, rod-like, and fractal-like nanoparticles of silver deposited on conventional glass substrates. The close proximity to silver nanostructures results in greater intensity and photostability of the fluorophore than for fluorophores solely deposited on glass substrates. These new anisotropic silver nanostructure-coated surfaces show much more favorable effects than silver island films or silver colloid-coated substrates. Subsequently, the use of metal-enhanced fluorescence (MEF) for biosensing applications is discussed.     

Fast and slow deposition of silver nanorods on planar surfaces: application to metal-enhanced fluorescence

Two methods have been considered for the deposition of silver nanorods onto conventional glass substrates. In the first method, silver nanorods were deposited onto 3-(aminopropyl)triethoxysilane-coated glass substrates simply by immersing the substrates into the silver nanorod solution. In the second method, spherical silver seeds that were chemically attached to the surface were subsequently converted and grown into silver nanorods in the presence of a cationic surfactant and silver ions. The size of the silver nanorods was controlled by sequential immersion of silver seed-coated glass substrates into a growth solution and by the duration of immersion, ranging from tens of nanometers to a few micrometers. Atomic force microscopy and optical density measurements were used to characterize the silver nanorods deposited onto the surface of the glass substrates. The application of these new surfaces is for metal-enhanced fluorescence (MEF), whereby the close proximity of silver nanostructures can alter the radiative decay rate of fluorophores, producing enhanced signal intensities and an increased fluorophore photostability. In this paper, it is indeed shown that irregularly shaped silver nanorod-coated surfaces are much better MEF surfaces as compared to traditional silver island or colloid films. Subsequently, these new silver nanorod preparation procedures are likely to find a common place in MEF, as they are a quicker and much cheaper alternative as compared to surfaces fabricated by traditional nanolithographic techniques.     

Angular-ratiometric plasmon-resonance based light scattering for bioaffinity sensing

We describe an exciting opportunity for affinity biosensing using a ratiometric approach to the angular-dependent light scattering from bioactivated and subsequently aggregated noble metal colloids. This new model sensing platform utilizes the changes in particle scattering from very small colloids, which scatter light according to traditional Rayleigh theory, as compared to the changes in scattering observed by much larger colloidal aggregates, formed due to a bioaffinity reaction. These larger aggregates no longer scatter incident light in a Cos(2) theta dependence, as is the case for Rayleigh scattering, but instead scatter light in an increased forward direction as compared to the incident geometry. By subsequently taking the ratio of the scattered intensity at two angles, namely 90 degrees and 140 degrees , relative to the incident light, we can follow the association of biotinylated bovine serum albumin-coated 20 nm gold colloids, cross-linked by additions of streptavidin. This new model system can be potentially applied to many other nanoparticle assays and has many advantages over traditional fluorescence sensing and indeed light-scattering approaches. For example, a single nanoparticle can have the equivalent scattered intensity as 10(5) fluorescing fluorescein molecules substantially increasing detection; the angular distribution of scattered light from noble metal colloids is substantially easier to predict as compared to fluorescence; the scattered light is not quenched by biospecies; the ratiometric measurements described here are not dependent on colloid concentration as are other scattering techniques; and finally, the noble metal colloids are not prone to photodestruction, as is the case with organic fluorophores.     

Aza-Diels–Alder Reactions with Lanthanide Triflates: Syntheses of Quinoline and Phenanthridine Derivatives

The aza-Diels–Alder reactions of cyclopentadiene and cyclo-1,3-hexadiene with various substituted N-arylimines in the presence of Yb/Sc triflates as catalyst in MeCN at room temperature gave quinoline and phenanthridine derivatives in moderate to high yields. Some of the cycloaddition reactions were carried out in ionic liquid.     

Non-intrinsic superconductivity in InN epilayers: Role of Indium Oxide

In recent years there have been reports of anomalous electrical resistivity and the presence of superconductivity in semiconducting InN layers. By a careful correlation of the temperature dependence of resistivity and magnetic susceptibility with structural information from high-resolution x-ray diffraction measurements, we show that superconductivity is not intrinsic to InN and is seen only in samples that show traces of oxygen impurity. We hence believe that InN is not intrinsically a superconducting semiconductor.