用微透镜阵列在单模光纤中写入长周期光纤光栅的新方法

报道了用微透镜阵列、几百个准分子激光脉冲有效地写入长周期光纤光栅的新方法。     

Angular and dose dependence of CR-39 neutron response for shape-selected tracks

A shape selection method corresponding to an energy discrimination was used to eliminate unwanted events disturbing evaluation of CR-39 detectors in detecting tracks induced by particles both of perpendicular and oblique incidence. The angular dependence of the response was examined, detecting fast neutrons from ²⁵²Cf with shape selection technique at various angles and distances. Also, the CR-39 track detectors with the ²⁵²Cf source were exposed to high γ-intensity of a ⁶⁰Co irradiation facility in the range 0.1 to 4.5 kGy, similar to the exposures inside spent fuel assemblies. Using the two functions the lower limit of burnup could be determined by the method.     

Heat transfer for diode side-pumped YAG slabs

Thermal heating is a major limiting factor in scaling the average power of a solid-state laser. The heat transfer coefficient is affected by the coolant flow rate, the physical properties of the laser slab and the coolant, and the pumping cavity geometry. The relationship between the heating effects and the heat transfer coefficient has been studied by considering the variations of thermal conductivity and expansion coefficient of the laser slab with temperature. It is concluded that different heat transfer coefficients should be adopted according to different heat intensities inside the laser slabs in order to obtain better pumping input as well as to optimize the cooling effects.     

Nonlinear optical characteristics of monolayer MoSe2

In this study, we utilized picosecond pulses from an Nd:YAG laser to investigate the nonlinear optical characteristics of monolayer MoSe₂. Two‐step growth involving the selenization of pulsed‐laser‐deposited MoO₃ film was employed to yield the MoSe₂ monolayer on a SiO₂/Si substrate. Raman scattering, photoluminescence (PL) spectroscopy, and atomic force microscopy verified the high optical quality of the monolayer. The second‐order susceptibility χ⁽²⁾ was calculated to be ～50 pm V^?1 at the second harmonic wavelength ～810 nm, which is near the optical gap of the monolayer. Interestingly, our wavelength‐dependent second harmonic scan can identify the bound excitonic states including negatively charged excitons much more efficiently, compared with the PL method at room temperature. Additionally, the MoSe₂ monolayer exhibits a strong laser‐induced damage threshold ～16 GW cm^?2 under picosecond‐pulse excitation_. Our findings suggest that monolayer MoSe₂ can be considered as a promising candidate for high‐power, thin‐film‐based nonlinear optical devices and applications.     

Reproducibility of myelin water fraction analysis: a comparison of region of interest and voxel-based analysis methods

This study compared region of interest (ROI) and voxel-based analysis (VBA) methods to determine the optimal method of myelin water fraction (MWF) analysis. Twenty healthy controls were scanned twice using a multi-echo T₂ relaxation sequence and ROIs were drawn in white and grey matter. MWF was defined as the fractional signal from 15 to 40 ms in the T₂ distribution. For ROI analysis, the mean intensity of voxels within an ROI was fit using non-negative least squares. For VBA, MWF was obtained for each voxel and the mean and median values within an ROI were calculated. There was a slightly higher correlation between Scan 1 and 2 for the VBA method (R²=0.98) relative to the ROI method (R²=0.95), and the VBA mean square difference between scans was 300% lower, indicating VBA was the most consistent between scans. For the VBA method, mean MWF was found to be more reproducible than median MWF. As the VBA method is more reproducible and gives more options for visualization and analysis of MWF, it is recommended over the ROI method of MWF analysis.     

用于机械振动实时监测的光纤光栅有源传感装置

把一对中心反射波长分别为1562.11nm和1562.71nm的光纤光栅粘贴在均质、等厚、等腰三角形悬臂梁上下表面作为环形腔光纤激光器端镜，当机械振动激励自由端时，通过观测激光输出脉冲，地施加于自由端的机械振动的频率进行了实时监测；观察两光栅波长漂移量差值的变化，可在0～6.1mm的范围内判断所测振动的振幅。低于100Hz时，实验结果与实际值基本吻合。     

A mathematical model of Schmidt corrector plate with defocus in variable for quick F ratio and large aperture systems

To make it easier for designing Schmidt optical systems, based on wavefront aberration functions, a mathematical model of the corrector plate aspheric surfaces varies as a function of defocusing amount is established. It corrects not only the third-order spherical aberration, but also the 5th-order spherical aberration for the system. A series of Schmidt optical systems were designed as examples to evaluate the mathematical model of the aspherics. Results show that the mathematical model is precisely in fitting the needed shape of the corrector, and can be used for the systems for quick F ratio and large aperture. A mathematical model for reflective correctors shape is also established.     

Size-selected Ni catalyst islands for single-walled carbon nanotube arrays

Many properties of single-walled carbon nanotube (SWCNT) arrays are determined by the size and surface coverage of the metal catalyst islands from which they are nucleated. Methods using thermal fragmentation of continuous metal films frequently fail to produce size-uniform islands. Hybrid numerical simulations are used to propose a new approach to controlled self-assembly of Ni islands of the required size and surface coverage using tailored gas-phase generated nanocluster fluxes and adjusted surface temperatures. It is shown that a maximum surface coverage of 0.359 by 0.96–1.02 nm Ni catalyst islands can be achieved at a low surface temperature of 500 K. Optimized growth of Ni catalyst islands can lead to fabrication of size-uniform SWCNT arrays, suitable for numerous nanoelectronic applications. This approach is deterministic and is applicable to a range of nanoassemblies where high surface coverage and island size uniformity are required.