Properties of Aqueous Polyurethane Dispersion Modified by Epoxide Resin and Their Use as Adhesive

The aqueous polyurethane hybrid dispersion modified by the epoxy resin were synthesized using 1,4-butanediol ( BDO ) and dimethylolpropionic(DMPA) as chain extenders. A kind of automobile interior decoration adhesive was made by the modified hybrid dispersions. Effects of the content and the kinds of epoxide resin on the properties of dispersions and dispersion-cast films such as appearance, pot life, viscosity, particle size, molecular mass, hardness, swelling in water, contact angle, strength of stress, elongation at break, and other mechanical properties were studied. At the same time the effect of the E20 content on the peel strength of the adhesive for several automobile interior decoration substrates such as rubber/wood, poly(vinyl chloride)/wood; leather/wood, sponge/wood was investigated. The experimental results show that when the epoxy resin E20 content was 8%, the modified polyurethane hybrid dispersions possess better properties and the adhesive made by the modified dispersions posses better adhesion for automobile interior decoration substrates. The stress-strain curve of the modified aqueous polyurethane hybrid dispersions films shows the modified aqueous cast films possess better rigidity and toughness.     

Direct Blue 71 staining as a destaining‐free alternative loading control method for Western blotting

In Western blotting, a suitable loading control is indispensable for correcting errors in the total amount of loaded protein. Immunodetection of housekeeping proteins and total protein staining have traditionally been used as loading control methods. Direct Blue 71 (DB71) staining—a novel, sensitive, dye‐binding staining method compatible with immunodetection—may offer advantages over these traditional loading control methods. Three common neuroscientific samples (human plasma, human oligodendrocytes, and rat brain) were employed to assess DB71 staining as a loading control method for Western blotting. DB71, CBB, one traditional housekeeping protein, and one protein of interest were comparatively assessed for reliability and repeatability and linear dynamic range over 2.5–40 μg of protein loaded. DB71's effect on the reliability and repeatability and linear dynamic range of immunoreaction were also assessed. Across all three sample types, DB71 was either equivalent or superior to CBB and housekeeping protein‐based methods in terms of reliability and repeatability and linear dynamic range. Across all three sample types, DB71 staining did not impair the reliability and repeatability or linear dynamic range of immunoreaction. Our results demonstrate that the DB71 staining can be used as a destaining‐free alternative loading control method for Western blotting.     

Fluorescent staining of protein in SDS polyacrylamide gels by salicylaldehyde azine

As a noncovalent fluorescence probe, in this study, salicylaldehyde azine (SA) was introduced as a sensitive fluorescence‐based dye for detecting proteins both in 1D and 2D polyacrylamide electrophoresis gels. Down to 0.2 ng of single protein band could be detected within 1 h, which is similar to that of glutaraldehyde‐silver stain, but approximately four times higher than that of SYPRO Ruby fluorescent stain. Furthermore, comparative analysis of the MS compatibility of SA stain with SYPRO Ruby stain indicated that SA stain is compatible with the downstream of protein identification by LC‐MS/MS. Additionally, the probable mechanism of the SA stain was investigated by molecular docking. The results demonstrated that the interaction between SA and protein was mainly contributed by hydrogen bonding and hydrophobic forces.     

TargetATPsite: A template‐free method for ATP‐binding sites prediction with residue evolution image sparse representation and classifier ensemble

Understanding the interactions between proteins and ligands is critical for protein function annotations and drug discovery. We report a new sequence‐based template‐free predictor (TargetATPsite) to identify the Adenosine‐5′‐triphosphate (ATP) binding sites with machine‐learning approaches. Two steps are implemented in TargetATPsite: binding residues and pockets predictions, respectively. To predict the binding residues, a novel image sparse representation technique is proposed to encode residue evolution information treated as the input features. An ensemble classifier constructed based on support vector machines (SVM) from multiple random under‐samplings is used as the prediction model, which is effective for dealing with imbalance phenomenon between the positive and negative training samples. Compared with the existing ATP‐specific sequence‐based predictors, TargetATPsite is featured by the second step of possessing the capability of further identifying the binding pockets from the predicted binding residues through a spatial clustering algorithm. Experimental results on three benchmark datasets demonstrate the efficacy of TargetATPsite. © 2013 Wiley Periodicals, Inc.     

Phase Behavior of Diglycerol Monomyristate in Different Nonpolar Organic Solvent Systems

We have investigated the phase behavior of diglycerol monomyristate (DGM) in a variety of organic solvents over a wide range of temperatures and compositions. At lower temperature, there exists a surfactant solid, which solubilize different amounts of oils depending on the oil nature. The melting temperature of the solid phase is virtually constant in a wide range of composition. In all the systems, a lamellar liquid crystal (L_α) is formed in surfactant‐rich regions at intermediate temperatures between the solid‐melt and isotropic two‐ or single‐phase regions. In the dilute regions reverse vesicles are formed in the L_α+O regions mainly in the case of linear hydrocarbon type oils. In the aromatic and cyclic aliphatic oils, there are isotropic solutions at 25°C. However, there is dispersion of α‐solid in the case of liner hydrocarbon oils. Two liquid‐phase regions above the L_α phase are observed in the case of tetradecane and hexadecane. In the shorter chain oil systems, such as octane and decane, no two liquid‐phase appear above L_α region. That is the two liquid‐phase region is largely dependent on the chain length of the oils, and becomes wider in longer hydrocarbon oil.     

Redispersibility of Acrylate Polymer Powder and Stability of Its Reconstituted Latex

The acrylate redispersible polymer powder (RPP) was produced from acrylate latex via spray drying, which was synthesized by latex polymerization with the configuration of soft core and hard shell. The powder's redispersibility and stability of its reconstituted latex were achieved through incorporating monomer methacrylic acid (MAA), which has functional carboxyl group and can provide an ionization effect in alkaline range. The influence of pH value and MAA amount on the redispersibility and stability were studied. The stabilization mechanism for reconstituted latex was also investigated. The acrylate RPP has good redispersibility at MAA of 4–5% and pH values between 9.0 and 10.0. The reconstituted latex is stable at these conditions due to high zeta potential and strong electrostatic repulsion force.     

After‐Rinsing Hair Growth Promotions of Hinokitiol‐Containing Vesicles and Emulsions

Two kinds of topical dosage forms of hinokitiol (HKL), namely vesicles and oil‐in‐water (O/W) emulsions, were prepared. Behenyl trimethylammonium chloride (BTMAC) and fatty acids were used as bilayer‐forming materials of the vesicles, and oils were employed as oil phases of the emulsions. The substantivity of HKL in the preparations was evaluated in vitro using hairless mouse skins. After applying the preparations onto the skin and rinsing it, the amount of HKL left on the skin was determined using high performance liquid chromatography (HPLC). It was higher when HKL was encapsulated in cationic vesicles rather than in nonionic vehicles, emulsions. An ionic interaction between the cationic vehicle and negatively charged skin is likely to account for the high substantivity. Among the emulsion preparations, an emulsion having octyl salicylate as oil phase exhibited the highest substantivity of HKL. This is probably because that the oil is a good solvent for HKL and it is skin‐retentive. In vivo hair growth‐promotion effect of each dosage form was investigated, where the sample application onto the clipped backs of female mice (C57BL6) and the subsequent rinsing of the backs were done once a day for 30 days. Only HKL in the cationic vesicles had hair growth promotion effect, possibly due to the significant substantivity.     

交联聚乙烯基吡咯烷酮快速前处理方法结合液相色谱-串联质谱分析红葡萄酒中酪蛋白过敏原

建立了红葡萄酒酪蛋白过敏原的质谱分析方法。选择专一性SRM离子对,建立3种亚型酪蛋白α-S1,α-S2,β的质谱定性与定量方法;利用交联聚乙烯基吡咯烷酮(PVPP)处理红葡萄酒有效提取蛋白,并直接快速酶解,使前处理缩短到2 h以内。结果表明,酪蛋白的回收率提高到80%以上,检出限达10μg/L。     

红外光谱电化学法研究对苯二酚的电化学氧化还原过程

利用现场红外光谱电化学、循环伏吸、导数循环伏吸法及其重构的电流-电位(i-E)曲线,研究对苯二酚(QH2)在不同溶剂中的电化学行为,得到可能的氧化还原机理。结果表明,在乙腈和中性非缓冲溶液中,QH2氧化终产物是对苯醌(Q)。在中性非缓冲溶液的还原的过程中,一部分Q在较正的电位下还原成QH2,另一部分Q在较负的电位下还原成Q2"。碱性溶液中,当加入1倍QH2量的OH-,循环伏安图(CV)出现2个电流相当的氧化峰(Q2",QH2);加入2倍OH-后,只出现一对氧化还原峰(Q2"/Q),从红外谱图上可清晰观察到电化学过程中氢键的变化。     

Ni基催化剂催化燃油重整耦合选择性催化还原NOx反应

分别以La₂O₂CO₃, CeO₂, ZrO₂和Al₂O₃为载体, 采用浸渍法制备了Ni基重整催化剂, 并以正十二烷模拟车载燃油进行催化重整反应以同时制备小分子碳氢化合物(HCs)和H₂, 考察了其在4wt%Ag/Al₂O₃上选择性催化还原(HC-SCR)氮氧化物(NO_x)的性能. 采用N₂吸附-脱附、X射线粉末衍射、H₂程序升温还原和热重等手段对Ni基催化剂进行了表征. 结果表明, 随着重整催化剂氧化还原性能增强, 产物中H₂浓度增加, 可参与SCR反应的HCs含量减少, 从而导致重整-SCR耦合体系上NO_x净化活性温度窗口向低温移动, NO_x最高转化率降低. Ni/ZrO₂+Ag/Al₂O₃耦合体系中H₂/HCs符合SCR反应所需的最优比例, 在柴油车典型排气温度范围内表现出良好的NO_x净化能力. 同时, 在Ni/ZrO₂+Ag/Al₂O₃耦合体系上考察了其燃油重整-SCR的活性稳定性. 结果显示, 重整催化剂的耐久性有待进一步提高.