Synthesis, characterization and protein adsorption behaviors of PLGA/PEG di-block co-polymer blend films

A series of poly(D,L-lactic-co-glycolic acid) (PLGA)/poly(ethyleneglycol) (PEG) di-block copolymers were synthesized by ring-opening polymerization of D,L-lactide and glycolide with different molecular weights of monomethoxy polyethyleneglycol (mPEG) 750, 2000 and 5000 as an initiator. The bulk properties of these co-polymers were characterized by using 1H NMR spectroscopy, gel permeation chromatography, differential scanning calorimetry (DSC). Electron spectroscopy for chemical analysis (ESCA) results, in which the blend films with the di-block copolymers showed increasing surface oxygen atomic percentage with increasing PEG chain length, indicate that PEG chain segment in the di-block copolymers is surface oriented and enriched onto the surface of the blend films. The extent of protein adsorption onto the surface of these blend films was studied, using iodine radio-labeled human serum albumin, gamma globulin and human growth hormone. The protein adsorption amount was reduced for the blend films prepared with PLGA/PEG 750 and 2000 di-block copolymers, but increased to a great extent for PLGA/PEG 5000 di-block copolymer. This is due to the increased water uptake capacity of the blend film, which absorbed more protein molecules into a swollen polymer matrix in addition to surface adsorption.     

Differential 3ω calorimeter

We have developed a new dynamic calorimeter using the differential 3ω detection method. The differential 3ω calorimeter is capable of measuring dynamic heat capacity of liquid samples. The new calorimeter consists of a Wheatstone bridge made of two identical heater/sensors, and is based on the sensitive null detection method. The balancing is done automatically at all frequencies and is independent of temperature; once a sample is placed on one heater/sensor, a third harmonic signal is produced due to the difference in the two arms of the bridge. The differential 3ω calorimeter provides enhancements over traditional dynamic methods in dynamic range (up to 30 kHz), resolution, and ease of operation.     

Preparation of water‐soluble,syndiotacticity‐rich,low molecular weight poly(vinyl alcohol) microfibrils in high yields with the low‐temperature polymerization of vinyl pivalate in tetrahydrofuran and saponification

To prepare water‐soluble, syndiotacticity‐rich poly(vinyl alcohol) (PVA) microfibrils for various industrial applications, we synthesized syndiotacticity‐rich, low molecular weight PVA by the solution polymerization of vinyl pivalate (VPi) in tetrahydrofuran (THF) at low temperatures with 2,2′‐azobis(2,4‐dimethylvaleronitrile) (ADMVN) as an initiator and successive saponification of poly(vinyl pivalate) (PVPi). Effects of the initiator and monomer concentrations and the polymerization temperature were investigated in terms of the polymerization behaviors and molecular structures of PVPi and the corresponding syndiotacticity‐rich PVA. The polymerization rate of VPi in THF was proportional to the 0.91 power of the ADMVN concentration, indicating the heterogeneous nature of THF polymerization. The low‐temperature solution polymerization of VPi in THF with ADMVN proved to be successful in obtaining water‐soluble PVA with a number‐average degree of polymerization (P_n) of 300–900, a syndiotactic dyad content of 60–63%, and an ultimate conversion of VPi into PVPi of over 75%. Despite the low molecular weight of PVA with P_n = 800, water‐soluble PVA microfibrillar fibers were prepared because of the high level of syndiotacticity. In contrast, for PVA with P_n = 330, shapeless and globular morphologies were observed, indicating that molecular weight has an important role in the in situ fibrillation of syndiotacticity‐rich PVA. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1103–1111, 2002     

Stereoselective One-Pot Synthesis of Vinyl Sulfones from Jcthyl Phenyl Sulfone

Vinyl sulfones are stereoselectively prepared in high yields in a one-pot by the Wittig-Horner reaction via phosphorylation of methyl phenyl sulfone at low temperature.     

Tetrachlorosilane Catalyzed Dithioacetalization

Tetrachlorosilane was found to be a mild as well as selective catalyst for dithioacetalization of the carbonyl compounds.     

Enhanced reactivity and enantioselectivity in catalytic glyoxylate-ene reactions using chiral bis(oxazoline)–copper complex in an ionic liquid

An optimal hydrophobic ionic liquid was discovered as a solvent for highly enantioselective glyoxylate-ene reactions catalyzed by a chiral bis(oxazoline)–copper complex. The reactivity and stereoselectivity were highly dependent upon the property of the ionic liquids; reactions between olefins and ethyl glyoxylate in [Bmim]SbF₆ at ambient temperature provided remarkably enhanced reactivity and stereoselectivity, which greatly exceed those of the corresponding reactions in dichloromethane. Furthermore, the metal–ligand complex was readily recycled up to eight times while exhibiting no significant decrease in reaction efficiency.     

Investigation on the stress behavior of cellulose acetate and the development of highly moisture‐resistant optical films for display devices

An optical film with high optical anisotropy was prepared by the stretching of a cellulose acetate film and the consequential orienting of a retardation‐enhancing additive. The change in retardation in response to moisture absorption was explored and it was found that the degree of the retardation variation is strongly related to the stretching temperature. Stress generated by the stretching and its relaxation was systematically investigated to elucidate the effect of stretching temperature on the irreversible change in retardation upon moisture absorption. The results show that the magnitude of releasable stress plays an important role in controlling changes in optical properties. In addition, the difference in the deformation behavior between glassy and rubbery states should be taken into account in the development of a moisture‐resistant optical film. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 1470–1478     

Effect of Dissolved Oxygen Tension and Agitation Rates on Sulfur-Utilizing Autotrophic Denitrification: Batch Tests

The effect of dissolved oxygen (DO) and agitation rate in open and closed reactors was examined for sulfur-utilizing autotrophic denitrification. The reaction rate constants were determined based on a half-order kinetic model. Declining denitrification rate constants obtained for open reactors those of 8.46, 8.03, and 2.18 for 50 mg NO₃ ^?-N/L, while 11.12, 9.14, and 0.12 mg^1/2/L^1/2?h were for 100 mg NO₃ ^?-N/L at agitation speeds of 0, 100, and 200 rpm. In closed reactors, the ever-increasing denitrification rates were 10.13, 22.56, and 37.03, whereas for the same nitrate concentrations and speeds the rates were 13.17, 15.63, and 26.67 mg^1/2/L^1/2?h. The rate constants correlated well (r ² ?=?0.89–0.99) with a half-order kinetic model. In open reactors, high SO₄ ^2?/N ratios (8.02–75.10) while in closed reactors comparatively low SO₄ ^2?/N ratios (6.10–13.39) were obtained. Sulfur oxidation occurred continuously in the presence of DO, resulting in mixed cultures acclimated to sulfur and nitrate. SO₄ ^2? was produced as an end product, which reduced alkalinity and lowered pH over time. Furthermore, DO inhibited sulfur denitrification in open reactors, while agitation in closed reactors increased the rate of denitrification.