Coumarinolignans Isolated from the Seeds of Brucea javanica

A new coumarinolignan, cleomiscosin E ( 1 ), together with the known compound cleomiscosin A ( 2 ), has been isolated from the seeds of Brucea javanica (L.) Merr . Their structures were assigned on the basis of spectral studies. These two compounds exhibited potent anti‐inflammatory activities by inhibiting the nitric oxide (NO) production in lipopolysaccharide (LPS)‐activated RAW264.7 macrophages.     

Synthesis, structure and magnetism of a S-shaped multi-iron substituted arsenotungstate containing a trivacant Keggin [B-α-AsW9O34] and a hexavacant Keggin [α-AsW6O26] fragments

A S-shaped multi-iron substituted arsenotungstate [enH₂]₂[(α-H₂As^VW₆O₂₆)Fe₃(H₂O)(B-α-H₄As^VW₉O₃₄)]₂[Fe]₂·8H₂O (1) (en=ethylenediamine) has been prepared by reaction of K₁₄[As₂^IIIW₁₉O₆₇(H₂O)]·nH₂O with Fe₂(SO₄)₃·xH₂O under hydrothermal conditions and structurally characterized by elemental analyses, IR spectra, UV spectra, powder X-ray diffraction (PXRD) and single-crystal X-ray diffraction. The skeleton of 1 consists of two asymmetric sandwich-type subunits [(α-H₂As^VW₆O₂₆)Fe₃(H₂O)(B-α-H₄As^VW₉O₃₄)]⁵⁻ linked by a di-Fe^III cluster. Moreover, magnetic susceptibility measurements demonstrate that 1 indicates the antiferromagnetic coupling interactions within Fe^III centers with the best-fitting set of parameters of J₁=−7.07 cm⁻¹, J₂=−0.45 cm⁻¹ and g=2.05, which are generated by the addition of the expressions of the molar susceptibilities of two tri-Fe^III clusters and one di-Fe^III cluster derived from for spin pairs coupled through the isotropic exchange interactions.     

Click maltose as an alternative to reverse phase material for desalting glycopeptides

Desalting peptides before mass spectrometry analysis is important because salts lead to adduct formation, increased chemical noise and ion suppression effect. A high concentration of salt can clog nanoelectrospray ionization (ESI) emitters. The reverse phase C18 material is commonly used to desalt peptides because of its high binding capacity. However, peptides with high hydrophilicity, such as glycopeptides, are not retained well on this material, resulting in the loss of peptide information. To improve the efficiency of glycopeptide desalting, we introduced a hydrophilic interaction chromatography (HILIC)-based material named click maltose. Four glycoproteins, horseradish peroxidase (HRP), human serum immunoglobulin G (IgG), bovine ribonuclease B (RNase B), and α-1 acid glycoprotein (AGP) were chosen as models and their glycopeptides were desalted with click maltose, AQ C18, Empore C18 and ZipTip C18. Click maltose as a HILIC material exhibited better performance than the other three C18 materials for both number of targeted glycopeptides and their corresponding intensities. In addition, accurate glycopeptide profiling was achieved with click maltose desalting regardless of peptide lengths and glycan types.     

Determination of phenylenediamine isomers in hair dyes by coal cinders micro-column extraction and MEKC

A new micellar electrokinetic chromatography (MEKC) method using beta-cyclodextrins (β-CDs) and 1-butyl-3-methylimidazolium hexafluorophosphates (ionic liquids) as additives was successfully developed for determination of para-, meta-, and ortho-phenylenediamines isomers (p-P, m-P, and o-P) in hair dyes. To improve the sensitivity of the MEKC-UV, a simple and cheap flow injection (FI) technique using a micro-column packed with coal cinders (the by-products from combustion in a boiler) as solid-phase extractant was also investigated. In the presence of 20 mmol L(-1) phosphates at pH 5.5, addition of 12 mmol L(-1) ionic liquids and 8 mmol L(-1) β-CDs greatly improved the separation efficiency. The three analytes could be quantitatively adsorbed by coal cinders, and desorbed readily with 0.15 mL of 0.01 mol L(-1) NaOH. Under the optimum conditions, an enrichment factor (EF) of 33.3 was obtained, and determination limits of p-P, m-P, and o-P were 1.97?×?10(-7), 0.99?×?10(-7), and 0.61?×?10(-7) mol L(-1), respectively. The adsorption capacities of the coal cinders micro-column for p-P, m-P, and o-P were all 1.20 mg g(-1). The presented procedure was successfully applied to the determination of p-P, m-P, and o-P in hair dyes with satisfactory results.     

Doubly hydrophilic multiarm hyperbranched polymers with acylhydrazone linkages as acid-sensitive drug carriers

A novel type of drug carrier capable of controlled drug release is proposed. It consists of an acid-sensitive doubly hydrophilic multiarm hyperbranched copolymer with a hyperbranched polyamidoamine core and many linear poly(ethylene glycol) arms. Using pH-sensitive acylhydrazone linkages, the polymer forms unimolecular micelles that can encapsulate hydrophobic drugs. Due to their amphiphilicity, the drug-loaded unimolecular micelles can self-assemble into multimolecular micelles that show acid-triggered intracellular delivery of the hydrophobic drugs.     

关于交半格同态构成的函数空间与FS-交连续Domain

定义了一类序结构-FS-交连续domain,讨论其相关性质并证明:(1)FS-交连续domain关于由Scott连续且保持非空有限交运算的函数构成的函数空间封闭,以(代数)FS-交连续domain为对象、以Scott连续函数为态射的范畴是Cartesian闭范畴;(2)任意分配可乘的有界完备domain是FS-交连续domain,从而紧连续dcpo的Smyth幂domain是FS-交连续domain.这些结果表明,FS-交连续domain是关于保非空有限交的连续映射构成的函数空间封闭的最恰当序结构.     

Highly sensitive electrochemical label-free aptasensor based on dual electrocatalytic amplification of Pt-AuNPs and HRP

In this work, a label-free electrochemical aptamer-based sensor (aptasensor) was constructed on account of the direct immobilization of redox probes on an electrode surface. For this proposed aptasensor, a gold nanoparticles (AuNPs)-coated electrode was firstly modified with redox probes-nickel hexacyanoferrates nanoparticles (NiHCFNPs) through chemisorption and electrostatic adsorption. Then, platinum-gold alloy nanoparticles (Pt-AuNPs) and horseradish peroxidase (HRP) were respectively assembled onto the modified electrode surface, which formed the multilayer films for amplifying the electrochemical signal of NiHCFNPs and immobilizing thiolated thrombin aptamers (TBAs). In the presence of target thrombin, the TBA on the multilayer could catch the thrombin onto the electrode surface, which resulted in a barrier for electro-transfer, leading to the decrease of the electrochemical signal of NiHCFNPs amplified by the Pt-AuNPs and HRP toward H(2)O(2). The proposed method avoided the redox probes labeling process, increased the amount of redox probes, and further amplified the electrochemical signal. Thus, the approach showed a high sensitivity and a wider linearity to thrombin in the range between 0.01 nM and 50 nM with a detection limit of 6.3 pM.     

Emission enhancement of conjugated polymers through self-assembly of unimolecular micelles to multi-micelle aggregates

By using a cosolvent self-assembly approach, the emission of multi-micelle aggregates from star copolymer unimolecular micelles is enhanced greatly through restriction of concentration self-quenching and intermolecular aggregation of a conjugated polymer core, due to the existence of a PEG shell of HCP-star-PEG unimolecular micelles.     

High-rate cathode based on Li3V2(PO4)3/C composite material prepared via a glycine-assisted sol–gel method

Carbon-coated monoclinic Li₃V₂(PO₄)₃ (LVP/C) cathode material has been successfully prepared by a novel glycine-assisted sol–gel method. The product is investigated by X-ray diffraction (XRD), high-resolution transmission electron microscopy (HR-TEM) and electrochemical method. In the range of 3.0–4.3 V, the LVP/C electrode presents excellent rate capability. It is 125.4 mAh g^{− 1} that can be delivered at 1 C charge–discharge rate and 99.5 mAh g^{− 1} is still obtained at 20 C charge–discharge rate. These results demonstrate that the carbon-coated LVP/C composite material prepared via a glycine-assisted sol–gel method has great potential for use in high-power lithium ion batteries.