Electrocatalytic Determination of Hydroxylamine in the Presence of Thiosulfate in Water and Wastewater Samples Using a Nanostructure Modified Carbon Paste Electrode

In this research, we report the preparation of a high sensitive voltammetric sensor for electrocatalytic determination of hydroxylamine (HX) in the presence of thiosulfate (TS). We describe the synthesis and characterization of CdO nanoparticles (CdO/NPs) with transmission electron microscopy (TEM) and X‐ray diffraction (XRD) methods. At an optimum condition, the two peaks are separated ca. 0.58 and 0.92 V for HX and TS at the surface of the proposed sensor. Square wave voltammetry (SWV) of HX exhibited two linear dynamic ranges with a detection limit (3σ) of 0.06 µmol L^?1. The propose sensor was used for determination of HX in water samples.     

Solvent-controlled dehydration and diastereoselective formation of indenone-fused thiazolo[3,2-a]pyridines via a one-pot four-component reaction

A solvent-controlled four-component reaction has been described for the preparation of either hydroxy-tetrahydro-thiaza-cyclopenta[c]fluoren-6-one or dihydro-thiaza-cyclopenta[c]fluoren-6-one from nitroketene dithioacetals, cysteamine hydrochloride, 1,3-indandione and aromatic aldehydes starting materials by changing solvent systems. These reactions proceed under catalyst-free conditions affording a range of two types of skeletally distinct thiazolo[3,2-a]pyridines-based heterocycles. Hydroxy-tetrahydro-thiaza-cyclopenta[c]fluoren-6-one was obtained in H₂O/EtOH (3:1, v/v) in high yield and diastereoselectivity but in contrast dihydro-thiaza-cyclopenta[c]fluoren-6-one was synthesised in EtOH in moderate to good yields and in the longer reaction time. The structural diversities have been confirmed spectroscopically, by IR ¹H and ¹³C NMR, and EI-MS spectra, which agree with the proposed structures.     

Complexation study of dibenzo-18-crown-6 with UO2 2+ cation in binary mixed non-aqueous solutions

The complexation reaction of macrocyclic ligand, dibenzo-18-crown-6 (DB18C6) with UO₂ ²⁺ cation was studied in ethylacetate-1,2-dichloroethane (EtOAc/DCE), acetonitrile-1,2-dichloroethane (AN/DCE), methanol-1,2-dichloroethane (MeOH/DCE) and ethanol-1,2-dichloroethane (EtOH/DCE) binary solutions at different temperatures using the conductometric method. The conductance data show that the stoichiometry of the complex formed between DB18C6 and UO₂ ²⁺ cation is affected by the nature of the solvent systems. A non-linear behaviour was observed for changes of log K _f of (DB18C6.UO₂)⁺² complex versus the composition of the binary mixed solvents. The values of thermodynamic quantities (?S°_c, ?H°_c) for formation of (DB18C6.UO₂)⁺² complex were obtained from temperature dependence of the stability constant using the van’t Hoff plots. The results show that in most cases, the complex is enthalpy stabilized and in all cases entropy stabilized and both parameters are affected by the nature and composition of the mixed solvents. In addition, the complex formation between dicyclohexyl-18-crown-6 (DCH18C6) and UO₂ ²⁺ cation was studied in pure AN and the results were compared with those of the (DB18C6.UO₂)⁺² complex.     

Determination of substituent chemical shifts in the proton resonance spectra of the porphyrins

Reproducible proton chemical shifts in the porphyrin series are obtained when the spectrum is measured in chloroform using the zinc (II) complex of the porphyrin in the presence of an excess of pyrrolidine. This method is specifically demonstrated for the case of 2,4-dicyanodeuteroporphyrin-IX dimethyl ester which, as the free base, shows dramatic effects due to aggregation phenomena. The shifts obtained using the zinc (II) complex plus pyrrolidine method, which allow compilation of substituent chemical shifts in the porphyrin series, are shown to be the same as the less easily accessible infinite dilution shifts of the porphyrin free bases.     

Homogeneous liquid-liquid extraction of trace amounts of mononitrotoluenes from waste water samples

Homogeneous liquid-liquid extraction method was studied based on a phase separation phenomenon in a ternary solvent system. According to this procedure, mononitrotoloenes were extracted by single-phase extraction in a water/methanol/chloroform, homogeneous ternary solvent system. Methanol and chloroform were used as consolute and extraction solvents, respectively. The homogeneous solution was broken by the addition of salt and a cloudy solution was formed. After centrifugation, the fine droplets of the extraction solvent were sedimented in the bottom of the conical test tube. Analysis of the extracts was carried out by gas chromatography. The optimization procedure was performed using Box-Behnken design. The variables involved were: sample and extraction solvent volumes, consolute solvent volume and phase separator reagent concentration. Optimum results were obtained under the following conditions: sample volume of 5 mL, extraction solvent volume of 55 μL, consolute solvent volume of 1 mL and phase separator reagent concentration; 5% (w/v). Under these conditions, the enrichment factors of 354, 311 and 300, dynamic linear ranges of 0.5-500, 1-500 and 1-500 μg L⁻¹, and limit of detections (LODs) of 0.09, 0.09 and 0.1 μg L⁻¹ were obtained for o-nitrotoluene, m-nitrotoluene and p-nitrotoluene, respectively. Finally, the method was successfully applied to the extraction and determination of MNTs in the waste water samples in the range of micrograms per liter with R.S.Ds. < 13.2%.     

Recent strategies in the synthesis of thiophene derivatives: highlights from the 2012–2020 literature

Molecular Diversity - Thiophene-based analogs have been fascinated by a growing number of scientists as a potential class of biologically active compounds. Furthermore, they play a vital role for...     

Benign synthesis of carboxamide ligands,H2Me2bqb and H2Me2bpb. Preparation,characterization and electrochemistry of Ni(II) complexes: The crystal structure of [Ni(Me2bqb)]

A novel and highly efficient approach for the synthesis of H₂Me₂bqb and H₂Me₂bpb using ionic liquid as an environmentally benign reaction medium has been developed, eliminating the need for the pyridine as a toxic solvent. The Ni(II) complex of the dianionic ligand Me₂bqb²⁻, [Me₂bqb²⁻ = 1,2-bis(quinoline-2-carboxamide)-4,5-dimethyl-benzene dianion], has been synthesized and characterized by elemental analyses and spectroscopic methods, and the crystal and molecular structure of [Ni(Me₂bqb)] (1), has been determined by X-ray crystallography. The complex exhibits distorted square-planar NiN₄ coordination geometry with two short and two long Ni–N bonds (Ni–N ∼1.85 and ∼1.96 Å, respectively). The electrochemical behavior of [Ni(Me₂bqb)] (1), has been studied by cyclic voltammetry and compared with the analogous complex, [Ni(Me₂bpb)] (2).     

Dispersion and deposition mechanisms of particles suspended in a turbulent plane Couette flow

Inertial particle transfer in a turbulent plane Couette flow (C flow) was studied using Direct Numerical Simulation (DNS) of the flow combined with a Lagrangian particle tracking approach for particles with Stokes numbers (St) 5, 25 and 125. The particle concentration was assumed low enough, so that the simulations were done under one-way coupling condition.     

Solvent effect on the linkage isomerism in [Fe(CO)4(NCS)]− and [Fe(CO)4(SCN)]− anions: A theoretical investigation

The present study illustrated the stability of linkage isomers of [Fe(CO)₄(NCS)]^? and [Fe(CO)₄(SCN)]^? by the use of PBE quantum method. It also investigated the polarity of solvent effect on dipole moment, structural parameters, and frontier orbital energies of complexes. The results indicated that the polarity of solvent had a significant effect on the frontier orbital energies and HOMO-LUMO gap. The character of Fe-C bonds of molecules was analyzed by Natural bond orbital (NBO) analysis. Back-bonding effect in these bonds was explored with calculation of quadrupole polarization of carbon atom by QTAIM analysis. Also, ¹⁴N NQR parameters were used for the illustration of Fe-NCS and Fe-SCN bonds.