膜蒸馏装置热容腔流场数值模拟的可行性分析

本文运用CFD软件,采用水作为工质,在第Ⅲ代膜组件基础上,对旋转切向入流空气隙膜蒸馏热容腔内的流场进行了模拟计算,通过数值模拟结果与实验数据的比较分析,验证了针对膜组件热容腔进行理论模拟所设置的物理模型和边界条件是符合实际的,理论模拟值和实验值的误差在20%范围内,其结果较为理想.     

Mg粉粒度对MgB2超导体宏观特征和显微结构的影响

研究了Mg粉粒度对MgB2超导体宏观特征和显微结构的影响规律。将不同粒度的Mg粉和B粉分别按1.03∶2的比例混合、压制成型后,在流通高纯氩气的条件下于800℃烧结1h,制备出MgB2块材。利用阿基米德方法、X射线衍射仪和扫描电子显微镜等分别测试样品的密度、物相组成和显微结构等。结果表明,Mg粉粒度对MgB2超导体的物相组成没有影响;随着Mg粉粒度的增加,MgB2超导体的最大气孔尺寸、质量损失率、体积膨胀系数都逐渐增大,但其密度逐渐降低。     

离子速度成像技术研究2-溴戊烷的光解离动力学

运用离子速度成像技术研究了2-溴戊烷分子在～234 nm处的光解离动力学. 通过分析光解产物Br(²P_3/2)(简称Br)和Br(²P_1/2) (简称Br*)的速度影像,分别得到其速度分布和角度分布. Br和Br*的速度分布可以用两个高斯分布拟合,分别对应于2-溴戊烷在～234 nm处两个独立的光解离反应通道. 高能的高斯分量对应于C-Br伸缩振动模式的直接解离,低能的高斯分量对应于弯曲振动和C-Br伸缩振动耦合所导致的解离. 确定出光解离产物Br的相对量子产率为0.892,结合Br和Br*碎片的各项异性参数和溴原子的相对量子产率,讨论了³Q₀、³Q₁和¹Q₁激发态分别对产物Br和Br*的贡献. 通过对比溴代戊烷4种同分异构体光解离过程的差异,讨论了分子烷基分支化对光解机理的影响.     

Charge state effect on the K-shell ionization of iron by xenon ions near the Bohr velocity

Fe K-shell ionization cross sections induced by 2.4–6.0 MeV Xe20+are measured and compared with different binaryencounter-approximation(BEA)models.The results indicate that the BEA model corrected both by the Coulomb repulsion and by the effective nuclear charge(Zeff)agrees well with the experimental data.Comparison of Fe K-shell X-ray emission induced by 5 MeV xenon ions with different initial charge states(20+,22+,26+,30+)verifies the applicability of the effective nuclear charge(Zeff)correction for the BEA model.It is found that Zeffcorrection is reasonable to describe direct ionization induced by xenon ions with no initial M-shell vacancies.However,when the M shell is opened,the Zeffcorrected BEA model is unable to explain the inner-shell ionization,and the electron transfer by molecular-orbital promotion should be considered.     

风速测量实验的设计与探究

基于电磁理论和空气动力学的相关知识,利用磁铁、金属棒和DISLAB传感器等器件设计并制作了风速测量系统,可准确地测量2-11级范围内的风速值.该装置还可作为演示电磁感应现象的设计型实验内容,实验过程中可加深学生对电磁感应现象的理解,并提高学生对matlab软件的应用能力.     

激光在PERC晶硅电池中背面点接触电极制备中的应用

在经过Al2O3全钝化发射极钝化局部背接触(PERC)结构电池的背面实现良好的接触电极一直是制约着PERC高效电池向产业化推广的重要因素之一。本文采用532 nm激光烧蚀背面钝化介质层方法和传统的光刻工艺来实现背面电极的局部接触,并对两种方法进行详细的比较与分析。对激光烧蚀和激光烧结两种不同的局部接触电极制备方式进行了对比,发现激光烧蚀是更为适宜的工艺方式。相较于激光烧结,以激光烧蚀方式制备的电池的串联面接触电阻从10.7Ω.cm2降到1.24Ω.cm2,效率从4.2%提高到10.7%。     

Curvelet based image compression via core vector machine

In this paper, a novel curvelet based digital image compression scheme is proposed. Aiming at achieving high compression ratio, the proposed scheme embeds a representative machine learning method, core vector machine (CVM), in the encoding process of the image compression technique. The core vector machine (CVM) has been introduced as an extremely fast classifier which is demonstrably superior to standard support vector machine (SVM) on very large datasets. In this scheme, we appropriately utilize the characteristic of CVM to reduce huge numbers of curvelet coefficients. Compared with image compression algorithms do not use CVM and methods based on wavelet transform, experimental results show that the compression performance of our method gains much improvement in peak-signal-to-noise-ratio (PSNR) and CPU time. Moreover, the algorithm works fairly well for declining block effect at higher compression ratios.     

Study on an optical system with coherent laser array source and phase optimization in turbulent atmosphere

Model of an optical system with coherent laser array source and the piston phase optimized by the stochastic parallel gradient descent algorithm is established. With this model, theory of beam propagation through the optical system in turbulent atmosphere is analyzed, and the analytical formulas of the beam average intensity along the propagation path are derived. Strehl ratio of the received beam induced by intensity disorderly distribution and power efficiency of the received beam are introduced to evaluate performance of the optical system. Under the H-V 5/7 atmospheric turbulent model, performance of an optical system with determinate parameters was calculated, and the influences of the propagation distance and the laser wavelength were numerically analyzed, respectively.     

基于石英增强光声光谱的HCl痕量气体高灵敏度探测研究

HCl是一种有毒有害气体,对其高灵敏度探测具有非常重要的意义,然而到目前为止,采用激光光谱的手段对其探测的研究报道很少。石英增强光声光谱(QEPAS)是近年来发展起来的一种痕量气体探测技术,具有系统体积小、价格低廉、探测灵敏度高等优点。以5 000 ppm HCl∶N₂混合气作为待测目标,采用输出波长为1 742.38 nm的分布反馈连续波单纵模半导体激光器,开展对基于QEPAS技术的HCl高灵敏度探测研究。为了提高信噪比和简化数据处理过程,QEPAS传感器系统采用波长调制和2次谐波探测技术。研究中,首先对声波探测系统中微共振腔强声波增强特性进行了讨论,选择了“共轴”形式的声波微共振腔,并对其尺寸进行了优化,选择的微共振管长度为4 mm、内径为0.5 mm。实验中研究了激光波长调制深度对QEPAS系统产生的信号幅度的影响,当QEPAS系统积分时间为1 s、激光波长调制深度为0.23 cm-1时,获得了815 ppb的优异检测极限,归一化噪声等效吸收系数为7.41×10-9 cm-1·W·Hz-1/2。在后续的实验中,可在待测HCl气体中加入水汽分子,提高HCl分子的热弛豫速率,进一步提高HCl-QEPAS传感器系统的信号强度。     

基于线性回归算法的春玉米叶面积指数的冠层高光谱反演研究

利用辽宁锦州地区2013年生长季不同土壤水分控制条件下的春玉米冠层高光谱数据,及对应的植株叶面积指数(leaf area index,LAI)数据,分析在不同发育期内不同生长状况下的春玉米冠层高光谱特征及其与植株叶面积指数的关系。采集并计算共313组有效样本,包括350～2 500 nm波段范围光谱的反射率、反射率倒数的对数、反射率一阶导数及LAI,应用多元逐步线性回归法和偏最小二乘回归法,对剔除了受大气水分影响较为严重光谱波段的其他波段数据进行降维,构建叶面积指数的全波段冠层高光谱数据模型,并进行精度检验与比较。结果表明,春玉米LAI与光谱反射率在可见光波段(350～680 nm)、红外波段(1 430～1 800和1 950～2 450 nm)均呈显著的负相关;反射率倒数的对数在对应区间为显著的正相关;反射率一阶导数则在可见光和近红外波段(350～1 350 nm)存在较显著相关波段。三种全波段冠层高光谱数据在春玉米LAI的线性回归中,偏最小二乘法在以冠层反射率为自变量的模型构建中,比多元逐步线性回归拟合度好,其总均方根误差为0.480 7;以冠层光谱反射率的倒数的对数及一阶导数为自变量,应用逐步线性回归法建模,拟合度较好,其总均方根误差分别为0.333 5和0.348 8;三种光谱数据的春玉米LAI两种回归算法中,以冠层反射率倒数的对数为自变量,应用逐步线性回归方法建模的拟合度最佳。