ICP-OES法测定穿心莲药材中6种重金属元素溶出特性的研究

以电感耦合等离子体发射光谱法(ICP-OES)同时测定了中药穿心莲中的As,Ba,Cd,Cr,Cu,Pb等6种重金属元素,方法相对标准偏差2.1%~4.6%,回收率92.0%~103.2%,灵敏度高、简单、准确可靠。考察了采用热回流提取、浸泡提取、超声辅助提取等不同提取方法和提取溶剂时,上述6种元素的溶出情况。结果表明,实验所用穿心莲药材中Ba的含量最高,其次为Cu和Cr,而As,Pb,Cd在药材中含量相对较低。随着提取溶剂中乙醇含量升高,Ba的溶出减少,而Cu、Cr的溶出增加,Cd在酸性溶液中溶出最多;提取方法则以冷浸法溶出重金属元素最少,使用纯水和碱水的热回流提取重金属元素溶出相对较多。以上差异可能与这些元素在药材中的存在形态有关。     

Instrumentation of coherent X-ray imaging and the primary experimental results

Coherent X-ray microscopy has advanced towards higher-energy, more brilliant sources over the past decade since its demonstrations, and many advancements have been made towards optimizing this imaging technique. Here we present both the experimental instrument for obtaining diffraction patterns and the primary reconstruction of yeast cell 2D projection. In addition, the characteristics of the existing optics at BL29XUL of SPring-8 Facility and the method of image reconstruction are discussed.     

Generation and Quantum Interference of Entangled Electron-Hole Pairs in a Hanbury Brown and Twiss Interferometer

The Hanbury Brown-Twiss interferometer is proposed to serve as a detector of the crossed Andreev reflection and to generate entangled electron-hole pairs. It is shown that the non-local electron and hole induced by the crossed Andreev reflection are entangled. Quantum interference of the entangled electron-hole pairs gives rise to a new measurable effect of the phase difference between two superconductors in the cross correlation. The present theoretical predictions can be experimentally realized within the present-day microelectronic technology.     

Aggregation Processes with Catalysis-Driven Decomposition

We propose a three-species aggregation model with catalysis-driven decomposition. Based on the mean-field rate equations, we investigate the evoIution behavior of the system with the size-dependent catalysis-driven decomposition rate J（i; j; k） = Jijk^v and the constant aggregation rates. The results show that the cluster size distribution of the species without decomposition can always obey the conventional scaling law in the case of 0 ≤v ≤ 1, while the kinetic evolution of the decomposed species depends crucially on the index v. Moreover, the total size of the species without decomposition can keep a nonzero value at large times, while the total size of the decomposed species decreases exponentially with time and vanishes finally.     

红外光谱探究常见污染气体对丝织品结构的影响

丝织品是由丝蛋白质组成,高温、高湿及污染物等因素会使其结构发生变化。为了科学地评估博物馆中污染气体对丝织品结构的影响,采取人工模拟实验制备二氧化氮、二氧化硫、乙酸和氨气常见博物馆污染气体环境,利用傅里叶红外光谱（FTIR）从丝蛋白质肽链结构、二级结构等方面探讨4种污染气体对丝织品蛋白质结构的影响。实验结果表明,二氧化氮老化30 h后样品的红外光谱在1 382 cm-1波数附近出现甲基对称变角振动吸收峰,而其他气体老化50 d的丝织品仍未产生甲基对称变角振动,说明二氧化氮对丝织品破坏最严重。所有污染气体老化后,样品的红外光谱在975和999 cm-1丝蛋白-Gly-Ala-和-Gly-Gly-肽链（一级）结构特征吸收峰处均有不同程度减弱,但碱性气体氨气较酸性气体减弱更明显。傅里叶红外光谱技术结合酰胺Ⅲ带（1 330～1 200 cm-1）去卷积和高斯拟合法研究表明,50 d氨老化后仅引起丝蛋白质非结晶区的轻微变化,α-螺旋、无规卷曲、β-折叠含量变化幅度较小,丝蛋白二级结构变化较小。相比而言,酸性气体对丝蛋白二级结构影响更加显著,出现β-折叠相对含量大幅降低、无规卷曲相对含量明显增加,其结晶区遭受严重破坏。在4种气体中,二氧化氮对丝织品二级结构影响最显著,老化30 h后β-折叠相对含量由原始值30.36%降低至18.12%,约降低40%。相应的二氧化氮对丝织品强度破坏最严重,在β-折叠含量降低的同时,材料的力学强度出现了显著降低。利用波数在1 700和1 640 cm-1红外光谱吸收峰的比值（A_{1 700/1 640}）和波数在1 620和1 514 cm-1红外光谱吸收峰的比值（A_{1 620/1 514}）判断样品的老化方式,实验结果表明二氧化氮、二氧化硫、氨气老化样品的方式主要为氧化老化,而乙酸老化的样品则发生氧化老化和水解老化两种老化方式。随着老化时间的延长,4种气体中二氧化氮老化样品的A_{1 620/1 514}比值增加最多、氧化最严重。推断与二氧化氮的强氧化性有关,也与二氧化氮使丝织品产生显著的甲基对称变角振动有关。建议博物馆应严格监测和控制二氧化氮气体浓度。该研究为制定合理的丝织品文物存放环境提供科学依据,对丝织品文物的保护具有重要意义。     

基于物理光学法的建筑物内高功率微波耦合场分布计算

利用物理光学法计算了高功率微波在建筑物内的耦合场分布。根据建筑物墙壁和窗户的透射率可以得到墙壁内侧的透射场,将它代入到矢量衍射公式中直接计算出在整个建筑物内的透射场;根据建筑物地面的反射率得到地板表面的反射场,将它代入到矢量衍射公式中可计算出整个建筑物内的反射场;对透射场与反射场进行矢量相加,得到叠加场。将本文方法得到的场分布情况和时域有限差分法得到的场分布进行比较,二者结果一致。物理光学法的优点在于其物理图像清晰,计算量小,计算速度快,适合应用在大型建筑物内部耦合场分布计算上。     

Hybrid method for investigation of electromagnetic scattering from conducting target above the randomly rough surface

A current based hybrid method (HM) is proposed which combines the method of moment (MOM) with the Kirchhoff approximation (KA) for the analysis of scattering interaction between a two-dimensional (2D) infinitely long conducting target with arbitrary cross section and a one-dimensional (1D) Gaussian rough surface. The electromagnetic scattering region in the HM is split into KA region and MOM region. The electric field integral equation (EFIE) in MOM region (target) is derived, the computational time of the HM depends mainly on the number of unknowns of the target. The bistatic scattering coefficient for the infinitely long cylinder above the rough surface with Gaussian roughness spectrum is calculated, and the numerical results are compared and verified with those obtained by the conventional MOM, which shows the high efficiency of the HM. Finally, the influence of the size, location of the target, the rms height and correlation length of the rough surface on the bistatic scattering coefficient with different polarizations is discussed in detail.     

介质pH对银基上4-甲基-4H-3-巯基-1,2,4-三氮唑成膜结构和缓蚀性能影响的SERS和电化学研究

在不同pH介质中,缓蚀试剂4-甲基-4H-3-巯基-1,2,4-三氮唑(4-MTTL)都能在银基底上形成自组装膜。SERS光谱表明:当pH=3时,4-MTTL分子是以硫醇式,通过两个氮原子为吸附位点,以较平躺方式在银表面构筑自组装膜;当介质为pH=7和pH=11时,4-MTTL以硫醇式,通过氮和硫原子为吸附位点倾斜或垂直方式作用于银表面。由于后者的吸附方式比前者更为垂直于表面,所以形成的膜中分子排列更为致密。电化学极化实验也表明,在pH=3的条件下,形成的4-MTTL单层有更正的腐蚀电位;在pH=11时,构筑的膜缓蚀能力强于pH=7的。并由电化学交流阻抗数据解析了相应的缓蚀机理。     

新型光弹调制干涉具研究

针对单个光弹调制器((Photoelastic Modulator,PEM))干涉具受到材料本身热、力学的限制,产生的最大光程差小,而多个PEM串联又难以控制,且多个PEM界面的多次反射将使光能大量损失等缺点,提出一种在单PEM上贴全反射膜经过多次反射有效提高最大光程的方法。理论推导分析了不同反射情况对光程差的影响,并得到任意角任意位置入射经多次反射后产生最大光程差的公式与光谱反演公式,且通过COMSOL、MATLAB、ZEMAX仿真和实验验证其可行性。实验选用的弹光晶体为硒化锌(ZeSe),压电晶体为石英,结果显示实验与理论的相对误差为0.21%,为该方法的工程应用提供了参考。     

Synthesis and Characterization of Pressure and Temperature Dual‐Responsive Polystyrene Microbeads

A facile approach to the synthesis of pressure and temperature dual‐responsive polystyrene (PS) microbeads with controlled sizes via dispersion polymerization is described. Three different luminophors are selected and directly introduced into the reaction system and thus incorporated into the resultant PS microbeads during polymerization. By manipulating the reaction conditions, including concentrations of the initiator and monomer, polarity of the reaction medium, and injection rate for the monomer, uniform PS microbeads with sizes ranging from 1 to 5 μm are obtained. When a light source centered at 365 nm is used to excite all the luminophors in the PS beads, three distinct and resolvable emission peaks corresponding well with the luminophors are observed. By taking advantage of their sensitive responses to both pressure and temperature, the PS beads can be utilized for quantitative measurements of these two stimulations simultaneously. The PS beads loaded with multiple luminophors have the ability to serve as building blocks for the fabrication of novel sensing and imaging devices and therefore provide a promising strategy for the study of aerodynamics.