Calculation of the Radiating Characteristics of a Thermodynamically Nonuniform Gas Medium

Passive methods of remote analysis of waste gases of industrial enterprises and aircrafts engines and gases ejected in eruptions of volcanos, in fires, and in other processes disturbing the atmosphere are now of limited utility because of the lack of well-developed mathematical techniques for solving the inverse problems of gas analysis. However, the advantage of these methods is obvious, since the equipment is limited to a receiving device and the gas medium serves as a radiator. At the same time, in modern techniques, the interpretation of measurements of emissivities of gases is performed using a phenomenological approach such that experimental data on radiation characteristics of various objects are approximated by simple polynomial relations whose coefficients are determined by minimization methods. This approach does not allow one to investigate the mechanism of the processes occurring in a radiating medium and gives no way of solving the inverse problem of monitoring the composition and thermodynamic parameters of a medium which disturbs the atmosphere by thermal effects. In elaborating theoretical methods of gas analysis, the elaboration of the direct problem of calculation of radiating characteristics of gases is of importance, since it is not clear how the emissivity of a gas medium depends on its thermodynamic parameters. This paper is devoted to the above problem. Here, the error is estimated that arises in modeling a nonuniform gas medium with an actual temperature distribution, which linearly depends on coordinate, by a uniform gas layer. It is shown that the difference between the radiation intensities calculated for uniform and nonuniform media can be significant in the practically important case where the recording device is in a zone of normal temperatures. This implies that the error of reconstruction of the spectroscopic and molecular parameters of gaseous compounds from high-temperature measurements of the radiating and absorbing characteristics should take into account the thermodynamic nonuniformity of the medium.     

Eligibility of spherical-well approximation for calculations of nucleon-transfer matrix elements

Single-particle matrix elements of nucleon transfer were calculated by the Woods-Saxon potential wave functions. The results are compared with the ones calculated by the spherical-well approximation. The eligibility of the approximation of the mean field of nuclei by the spherical well to study the initial stage of nuclear reactions at heavy-ion collisions is demonstrated. The text was submitted by the authors in English.     

Isosteres of peptides: boron analogs as dipolar forms of α‐amino acids – a theoretical study

Modification of peptides to produce peptidomimetics is of great interest, with the aim of designing potent, selective, and metabolically stable analogs having certain conformational properties. Organoboranes have been reported in the literature with a wide range of therapeutic applications. One of the therapeutically important class of molecules is amine‐carboxyboranes derived from amino acids by replacement of the Cα atom of an amino acid/peptide by boron. The conformational preferences of these peptides, with respect to backbone ω, ?, and ψ torsion angles, have been investigated by theoretical calculations. The amide bond in these molecules has the same geometry in the ground and transition states as the natural peptides. However, the boron isosteres of glycine and alanine peptides are less structured than their natural derivatives, but are distinguished by structures with a positive value for the ? angle, which is normally disfavored for natural peptides. This property could be used to build peptides with a geometry not usually seen in natural peptides. Copyright © 2007 John Wiley & Sons, Ltd.     

1/f Noise in dye-sensitized solar cells and NIR photon detectors

All electronic devices are plagued with 1/f noise originating from many causes. The most important factors contributing to 1/f noise in a semiconductor is believed to be recombination of carriers and their trapping at defects and impurity sites. Adsorption of moisture and electron acceptor molecules enhances the intensity of 1/f noise. Amazingly, some molecular species that strongly chelate to the semiconductor surface, suppress 1/f noise owing to passivation of the recombination sites. Thus in addition to sensitization, the dye adsorbed on the nanocrystallites plays a key role in mitigation of recombinations. For this reason dye-sensitized heterojunctions could also find application as low noise NIR photon detectors. Experiments conducted with oxide semiconductors (TiO₂, ZnO, SnO₂) indicate that the mode of binding of dyes at specific sites determines the extent to which the recombination and 1/f noise are suppressed. The transport of electrons in a nanocrystalline matrix is diffusive with a diffusion coefficient D depending on the trapping and detrapping processes. Thus passivation of trapping sites by the adsorbed dye is expected to increase the response time which can be expressed as τ  L²/D, where L = thickness of the nanocrystalline film. Measurement techniques and construction of a dye-sensitized NIR photon detector will be discussed.     

Correction: Phytol-based novel adjuvants in vaccine formulation: 1. assessment of safety and efficacy during stimulation of humoral and cell-mediated immune responses

This is a correction article.     

Application of time-variable feedback to the input amplifier of pulse magnetic resonance spectrometers: Experimental studies

Experimental research on the improvement of the sensitivity and time resolution of pulsed magnetic resonance spectrometers is discussed. It is shown that application of a time-variable feedback of a signal to the input of the receiver amplifier can decouple, the “fixed” relationship between the quality factorQ and the ringdown time of the resonance system. Experiments were performed with low-frequency, radio-frequency and microwave pulse-type magnetic resonance receivers. Modifications of an S/C-band electron spin echo modulation spectrometer carried out to check the “time-variable feedback” performance are described. It is demonstrated that the application of a time-variable feedback can significantly reduce the ringdown time and improve the recovery properties of the magnetic resonance receiver system. It is also demonstrated that the time-variable feedback can improve the overall receiver sensitivity due to the fact that the working bandwidth of the resonance system can be optimized separately for the transmitting and the receiving mode. Signal values could be increased at least three times and the signal-to-noise ratio about 1.5–2 times. The largest improvement is achieved with the initially overcoupled resonator. Experimental spectra of test samples for different settings of the time-variable feedback are shown.     

A rapid and sensitive extractive spectrophotometric determination of copper(II) in pharmaceutical and environmental samples using benzildithiosemicarbazone.

Benzildithiosemicarbazone (BDTSC) is proposed as a sensitive and selective analytical reagent for the extractive spectrophotometric determination of copper(II). BDTSC reacts with copper(II) in the pH range 1.0-7.0 to form a yellowish complex. Beer's law is obeyed in the concentration range 0.5-0.4 microg cm(-3). The yellowish Cu(II)-BDTSC complex in chloroform shows a maximum absorbance at 380 nm, with molar absorptivity and Sandell's sensitivity values of 1.63 x 10(4) dm3 mol(-1) cm(-1) and 0.00389 microg cm(-2), respectively. A repetition of the method is checked by finding the relative standard deviation (RSD) (n = 10), which is 0.6%. The composition of the Cu(II)-BDTSC complex is established as 1:1 by slope analysis, molar ratio and Asmus' methods. An excellent linearity with a correlation coefficient value of 0.98 is obtained for the Cu(II)-BDTSC complex. The instability constant of the complex calculated from Edmond and Birnbaum's method is 7.70 x 10(-4) and that of Asmus' method is 7.66 x 10(-4), at room temperature. The method is successfully employed for the determination copper(II) in pharmaceutical and environmental samples. The reliability of the method is assured by analyzing the standard alloys (BCS 5g, 10g, 19e, 78, 32a, 207 and 179) and by inter-comparison of experimental values, using an atomic absorption spectrometer.     

Ultrafast creation and annihilation of space-charge domains in a semiconductor superlattice observed by use of Terahertz fields

We report an experimental study indicating ultrafast creation and annihilation of space-charge domains in a semiconductor superlattice under the action of a THz field. Our experiment was performed for an InGaAs/InAlAs superlattice with the conduction electrons undergoing miniband transport. We applied to a superlattice a dc bias that was slightly smaller than a critical bias necessary for the formation of space-charge domains caused by a static negative differential conductivity. Additionally subjecting the superlattice to a strong THz field, resulted in a dc transport governed by the formation of domains if the frequency of the field was smaller than an upper frequency limit (~3 THz). From this frequency limit for the creation and annihilation of domains we determined the characteristic time of the domain buildup. Our analysis shows that the buildup time of domains in a wide miniband and heavily doped superlattice is limited by the relaxation time due to scattering of the miniband electrons at polar optic phonons. Our results are of importance for both an understanding of ultrafast dynamics of pattern formation in nanostructures and the development of THz electronic devices.Received: 25 March 2004, Published online: 23 July 2004PACS: 72.20.Ht High-field and nonlinear effects - 72.30. + q High-frequency effects; plasma effects - 73.21.Cd SuperlatticesK.N. Alekseev: Permanent address: Department of Physical Sciences, P.O. Box 3000, University of Oulu FIN-90014, Finland.     

640 × 512 pixel narrow-band, four-band, and broad-band quantum well infrared photodetector focal plane arrays

A 9 μm cutoff 640 × 512 pixel hand-held quantum well infrared photodetector (QWIP) camera has been demonstrated with excellent imagery. A noise equivalent differential temperature (NEDT) of 10.6 mK is expected at a 65 K operating temperature with f/2 optics at a 300 K background. This focal plane array has shown background limited performance at a 72 K operating temperature with the same optics and background conditions. In this paper, we discuss the development of this very sensitive long-wavelength infrared camera based on a GaAs/AlGaAs QWIP focal plane array and its performance in quantum efficiency, NEDT, uniformity, and operability. In the second section of this paper, we discuss the first demonstration of a monolithic spatially separated four-band 640 × 512 pixel QWIP focal plane array and its performance. The four spectral bands cover 4–5.5, 8.5–10, 10–12, and 13.5–15 μm spectral regions with 640 × 128 pixels in each band. In the last section, we discuss the array performance of a 640 × 512 pixel broad-band (10–16 μm full-width at half-maximum) QWIP focal plane.     

Revisiting Gouy phase

The aim of this paper is to highlight the added value of the generalized Gouy phase shift introduced by Siegman. Although suited for optical systems study, including those more complex than free space, we note that it did not meet the use that it deserves so far. The analysis of the whole of the ideas and analytical approaches associated to the important concept of the Gouy phase proves its effectiveness.

Usually, the resonance condition is systematically built on the basis of the equivalent empty cavity. Unfortunately, this approach does not cover some of the useful parameters of the real resonator. By means of the generalized Gouy phase and the self-consistent complex parameter q, we derive here a new approach for the calculation of the resonance condition for the real cavity. Moreover, the use of the generalized Gouy phase clearly simplifies the study of resonators, while making it possible to avoid the use of the Huygens’ Fresnel integral.