Grafting of silica during the processing of silica‐filled SBR: Comparison between length and content of the silane

The treatment of nanoscopic silica grafted in the blend during the processing of silica‐filled styrene butadiene rubber was performed with silane, introduced at different concentrations, or at a constant concentration with a given length of alkyl chain. From swelling measurements in water and in solvent, the maximum silane content that can be grafted has been calculated as a function of the length of the silane alkyl chains as well as their efficiency to cover the silica surface. The found values are close to the values found in the literature for grafting in solution. Moreover, a direct correspondence between the length of the silane alkyl chains and their concentration has been deduced. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 143–152, 2006     

Encapsulation of ZnS:Mn2+ nanocrystals with diblock copolymers

The encapsulation of the nanocrystalline manganese‐doped zinc sulfide (ZnS:Mn) in poly(styrene‐b‐2vinylpyridine) (PS‐PVP) diblock copolymers is reported. Below the critical micelle concentration in the absence of nanocrystals (NCs), inverse micelles of PS‐PVP were induced by adding ZnS:Mn NCs, the presence of which was confirmed by scanning force microscope and dynamic light scattering. In toluene, a PS‐selective solvent, the less‐soluble PVP blocks preferentially surround the ligand‐coated ZnS:Mn NCs. For PS‐PVP encapsulated ZnS:Mn NCs, the ratio of blue emission to orange emission of ZnS:Mn NCs is dependent on both the concentration of PS‐PVP and the solvent quality. The pyridine of PVP blocks form complexes with the Zn atoms via the nitrogen lone pair and thus the sulfur vacancies are passivated. As a result, the defect‐related blue emission is selectively quenched even when the micelles are not formed. As the concentration of PS‐PVP encapsulating the ZnS:Mn NCs increases, the intensity of blue emission decreases. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3227–3233, 2006     

Measurement and prediction of solubilities and diffusion coefficients of carbon dioxide in starch–water mixtures at elevated pressures

The solubility and diffusion coefficient of carbon dioxide in intermediate‐moisture starch–water mixtures were determined both experimentally and theoretically at elevated pressures up to 16 MPa at 50 °C. A high‐pressure decay sorption system was assembled to measure the equilibrium CO₂ mass uptake by the starch–water system. The experimentally measured solubilities accounted for the estimated swollen volume by Sanchez–Lacombe equation of state (S‐L EOS) were found to increase almost linearly with pressure, yielding 4.0 g CO₂/g starch–water system at 16 MPa. Moreover, CO₂ solubilities above 5 MPa displayed a solubility increase, which was not contributed by the water fraction in the starch–water mixture. The solubilities, however, showed no dependence on the degree of gelatinization (DG) of starch. The diffusion coefficient of CO₂ was found to increase with concentration of dissolved CO₂, which is pressure‐dependent, and decrease with increasing DG in the range of 50–100%. A free‐volume‐based diffusion model proposed by Areerat was employed to predict the CO₂ diffusivity in terms of pressure, temperature, and the concentration of dissolved CO₂. S‐L EOS was once more used to determine the specific free volume of the mixture system. The predicted diffusion coefficients showed to correlate well with the measured values for all starch–water mixtures. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 607–621, 2006     

Meshless simulation of equilibrium swelling/deswelling of pH‐sensitive hydrogels

Hydrogels have been widely used in microelectromechanical systems (MEMS) and Bio‐MEMS devices. In this article, the equilibrium swelling/deswelling of the pH‐stimulus cylindrical hydrogel in the microchannel is studied and simulated by the meshless method. The multi‐field coupling model, called multi‐effect‐coupling pH‐stimulus (MECpH) model, is presented and used to describe the chemical field, electric field, and the mechanical field involved in the problem. The partial differential equations (PDEs) describing these three fields are either nonlinear or coupled together. This multi‐field coupling and high nonlinear characteristics produce difficulties for the conventional numerical methods (e.g., the finite element method or the finite difference method), so an alternative—meshless method is developed to discretize the PDEs, and the efficient iteration technique is adopted to solve the nonlinear problem. The computational results for the swelling/deswelling diameter of the hydrogel under the different pH values are firstly compared with experimental results, and they have a good agreement. The influences of other parameters on the mechanical properties of the hydrogel are also investigated in detail. It is shown that the multi‐field coupling model and the developed meshless method are efficient, stable, and accurate for simulation of the properties of the stimuli‐sensitive hydrogel. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 326–337, 2006     

Metallocene copolymers of propene and 1‐hexene: The influence of the comonomer content and thermal history on the structure and mechanical properties

The relationships between the structure and properties have been established for copolymers of propylene and 1‐hexene synthesized with an isotactic metallocene catalyst system. The most important factor affecting the structure and properties of these copolymers is the comonomer content. The thermal treatment, that is, the rate of cooling from the melt, is also important. These factors affect the thermal properties, the degree of crystallinity, and therefore the structural parameters and the viscoelastic behavior. A slow cooling from the melt favors the formation of the γ phase instead of the α modification. Regarding the viscoelastic behavior, the β relaxation, associated with the glass‐transition temperature, is shifted to lower temperatures and its intensity is increased as the 1‐hexene content raises. The microhardness values are correlated with those of the storage modulus deduced from dynamic mechanical thermal analysis curves, and good linear relations have been obtained between these parameters. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1253–1267, 2006     

Gold ultra-microelectrode arrays: application to the steady-state voltammetry of hydroxide ion in aqueous solution.

Gold ultra-microelectrode arrays are used to explore the electrochemical oxidation of hydroxide ions and are shown to be analytical useful. Two types of ultra-microelectrode arrays are used; the first consist of 256 individual electrodes of 5 microm in radius, 170 of which are electrochemically active in a cubic arrangement which are separated from their nearest neighbour by a distance of 100 microm. The second array compromises 2597 electrodes of 2.5 microm in radius and of which 1550 of which are electrochemically active in a hexagonal arrangement separated by the nearest neighbour by 55 microm. Well defined voltammetric waves are found with peak currents proportional to the concentration of hydroxide ions in the range 50 microM to 1 mM. Detection limits of 20 microM using the 170 ultra-microelectrode and 10 microM with the 1550 ultra-microelectrode array are shown to be possible but with a higher sensitivity of 4 mA M(-1) observed using the 1550 ultra-microelectrode array compared to 1.2 mA M(-1) with the 170 ultra-microelectrode array.     

A simple and sensitive analytical method for the determination of antimony in environmental and biological samples.

The results of a study and application of leucocrystal violet for the determination of antimony in parts per million levels is described here. The proposed method is based on the reaction of antimony(III) with acidified potassium iodate to liberate iodine. The liberated iodine selectively oxidizes leucocrystal violet to crystal violet dye. The formed dye shows maximum absorbance at 590 nm. The color system obeys Beer's law in the concentration range from 0.4 - 3.6 microg antimony per 25 ml of final solution. The molar absorptivity and Sandell's sensitivity were found to be 7.32 x 10(5) l mol(-1) cm(-1) and 0.0016 microg cm(-2), respectively. All variables were studied in order to optimize the reaction. The proposed method is satisfactorily applicable for the analysis of antimony in various environmental and biological samples. The method is simple, highly sensitive, accurate and reliable.     

Structure–activity studies on the fungitoxicity of some triorganotin(IV) compounds

Seventeen triorganotin(IV) compounds, with the general formula R₃SnX, containing symmetrical and unsymmetrical combinations of alkyl and aryl groups on tin and with a wide variation in the non-carbon-bonded anionic (X) residues, were examined along with three formally pentacoordinated adducts of triaryltin chlorides with triphenylphosphine oxide for their antifungal activity against nine plant pathogenic and saprophytic fungi. The in vitro tests included inhibitory studies on radial growth, mycelial growth, spore germination, and germ tube elongation. A significant finding was the dependence of fungitoxicity on the nature of the X group in both the tributyltin and triaryltin series, in contrast to earlier published reports on the negligible influence of the X groups on overall toxicity relative to the R group. This suggests that the X group is significantly involved in transporting the biocide to the reactive sites, and that the X group which tends to confer increased solubility to the triorganotin compound gives rise to increased activity. In studies of R group variations, tri-iso-butyltin bromide was found to be much less fungitoxic than tri-n-butyltin compounds, a result which is reconcilable in terms of increased steric encumbrance at the tin site in the former case. The steric factor is also implicated in the reduced activities observed for tris(p-tolyl)tin and tris(p-chlorophenyl)tin compounds relative to (Ph₃SnX) towards most of the fungi screened in this study. In general, it was also noted that the triaryltins were more selective in their antifungal action than the trialkyltins, which exhibited broad spectral activity when applied at the concentration level of 10 μg cm^?3.     

Berichtigung

Ohne Zusammenfassung     

Kinetics of methylchlorosilane formation on Zn-promoted Cu3Si

The kinetics of the direct synthesis reaction (Si + 2CH₃Cl → (CH₃)₂SiCl₂) were measured on a Cu₃Si alloy containing 1.2 atom % Zn. Reaction was carried out in a differential reactor (520–595 K, 1 atm) attached to an ultrahigh vacuum (UHV) system. Auger spectroscopy was used to characterize the surface before and after reaction. Zinc does not significantly change the overall rate of reaction, but it changes selectivity to dimethyldichlorosilane (the desired product), surface composition, activation energies, and induction times. The rate of silicon diffusion to the surface is not limiting in the presence of zinc. Zinc is found to be a promoter for improved selectivity only in low concentrations, and only a fraction of the surface appears to be active for reaction. The kinetics appear relatively insensitive to the surface composition or the form of surface carbon. A Cu₃Si surface with Zn is shown to be a good model catalyst for the direct synthesis reaction.