Thickness decrease of a grafted polyelectrolyte membrane exposed to shear flow

The effect of the shear flow on the thickness change of a polyelectrolyte membrane grafted onto a glass substrate was directly investigated with a flow cell combined with a confocal laser scanning microscope. The membrane thickness decreased proportionally to an increase in the shear stress of the flow when the shear rate exceeded a critical value of 1 s^?1. The higher the ionic strength was of the fluid, the greater the thinning effect was. The correlation between the critical shear rate and the relaxation of the polymer in the gel membrane was examined. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2808–2815, 2003     

Qualitative Theory and Identification of Dynamic System with One Degree of Freedom

Dynamic systems described by nonlinear differential equations of the second order are studied. It is assumed that certain preliminary information on the dissipative or elastic characteristics of systems is known. A new approach is demonstrated to obtaining full information on unknown or partially known characteristics of a system from measurements of not only displacements but also velocities and accelerations __________ Published in Prikladnaya Mekhanika, Vol. 41, No. 6, pp. 139–143, June 2005.     

Magnetic order in RCr\mathsf{_{2}}Si\mathsf{_{2}} intermetallics

The magnetic structure and ordering temperatures of three intermetallic compounds which crystallize in the tetragonal ThCr₂Si₂ structure, TbCr₂Si₂, HoCr₂Si₂ and ErCr₂Si₂, have been determined by neutron diffraction, differential scanning calorimetry and magnetization measurements. The Cr-sublattice orders anti-ferromagnetically with Néel temperatures of 758 K for TbCr₂Si₂, 718 K for HoCr₂Si₂ and 692 K for ErCr₂Si₂. Chromium atoms located at 4d crystallographic sites are aligned anti-parallel along the c-axis, with G_ZCr magnetic modes. In contrast with metallic bcc Cr, the refined room temperature value of the ordered Cr moment is anomalously large for all three compounds. No long range magnetic order of the R sublattice in TbCr₂Si₂ and HoCr₂Si₂ is observed, whilst the Er sublattice in ErCr₂Si₂ orders independently of the Cr sublattice below 2.4 K with moments ferromagnetically aligned in the basal plane.Received: 4 November 2003, Published online: 30 January 2004PACS: 75.25. + z Spin arrangements in magnetically ordered materials (including neutron and spin-polarized electron studies, synchrotron-source X-ray scattering, etc.) - 75.30.Cr Saturation moments and magnetic susceptibilities - 75.50.Ee Antiferromagnetics     

Structure and optical properties of lead iodide based two-dimensional perovskite compounds containing fluorophenethylamines

Phenethylammonium-based perovskites, which can be regarded as a semiconductor/insulator multiple quantum well consisting of lead halide semiconductor layers sandwiched between phenethylammonium insulator layers were prepared. To investigate the effects of the electronic state and the orientation of organic insulator layers on the optical properties of layered perovskites, fluorine substituted analogues were also prepared. The structure and optical properties were investigated by the XRD, UV–Vis absorption, and fluorescence measurements. The exciton absorption peak was shifted by the substitution of fluorine atoms in organic ammonium compounds. It became clear that the optical properties of two-dimensional perovskite compounds were controlled by the substitution of fluorine atoms.     

Magnetotransport and magnetic properties of InAs/Mn digital alloys

We have investigated the magnetic and magneto-transport properties of a systematic sequence of five InAs/Mn digital alloys grown by a combination of molecular beam epitaxy and atomic layer epitaxy. The samples consist of 30 periods of Mn fractional monolayers (ML) (0.17–0.5 ML) separated by 14 ML thick InAs spacer layers in a superlattice configuration. Four samples show n-type electrical conduction while the fifth (0.25 ML Mn) is p-type. Squid magnetization measurements performed on these samples show remnant magnetization above room temperature, which is apparently related to a second phase.     

Electrical characterization of low temperature deposited TiO2 films on strained-SiGe layers

Thin films of titanium dioxide have been deposited on strained Si_0.82Ge_0.18 epitaxial layers using titanium tetrakis-isopropoxide [TTIP, Ti(O-i-C₃H₇)₄] and oxygen by microwave plasma enhanced chemical vapor deposition (PECVD). The films have been characterized by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). Dielectric constant, equivalent oxide thickness (EOT), interface state density (D_it), fixed oxide charge density (Q_f/q) and flat-band voltage (V_FB) of as-deposited films were found to be 13.2, 40.6 Å, 6×10¹¹ eV⁻¹ cm⁻², 3.1×10¹¹ cm⁻² and −1.4 V, respectively. The capacitance–voltage (C–V), current–voltage (I–V) characteristics and charge trapping behavior of the films under constant current stressing exhibit an excellent interface quality and high dielectric reliability making the films suitable for microelectronic applications.     

Fullerene C6 0 Aggregates in Polymethyl Methacrylate Films

The structure of aggregates of fullerene C_{6 0} introduced into films of radical polymethyl methacrylate in the stage of solution preparation was studied by wide-angle X-ray diffraction.     

Preconcentration and recovery of uranium and thorium from Indian monazite sand by using a modified fly ash bed

Adsorption of uranium, as UO₂ ²⁺, and thorium, as Th⁴⁺, has been studied using a modified fly ash bed. Effects of pH and various ions like La³⁺, Fe³⁺, Ce⁴⁺, SiO₃ ^2- etc., have been examined. Synthetic mixtures of UO₂ ²⁺ and Th⁴⁺ in different concentrations were passed through the bed and eluted separately with various selective reagents viz. ammonium carbonate, sodium carbonate and acetic acid-sodium hydroxide buffer. Separations of these elements at ppm level are shown to be very effective. The separation of uranium and thorium in the presence of lanthanides in monazite sand has been studied successfully. In the analysis of monazite sand, the oxalate precipitation has been avoided. The method is simple and of very low cost. The modified fly ash bed can also be used to remove uranium from contaminated water.