Application of rainbow schlieren deflectometry to measure temperature and oxygen concentration in a laminar gas-jet diffusion flame

The quantitative rainbow schlieren deflectometry (RSD) technique was applied to measure temperature and oxygen concentration in an axisymmetric hydrogen gas-jet diffusion flame burning in quiescent air at fuel jet exit Reynolds number of 70. Schlieren measurements were compared with conventional measurements using a thermocouple and a gas-sampling probe. Good agreement between the two measurement techniques was achieved on the fuel-lean side of the flame.     

AGE method simulations of a turbulent far‐wake compared to spectral DNS

Turbulent flow simulation methods based on finite differences are attractive for their simplicity, flexibility and efficiency, but not always for accuracy or stability. This paper demonstrates that a good compromise is possible with the advected grid explicit (AGE) method. Starting from the same initial field as a previous spectral DNS, AGE method simulations of a planar turbulent wake were carried out as DNS, and then at three levels of reduced resolution. The latter cases were in a sense large‐eddy simulations (LES), although no specific sub‐grid‐scale model was used. Results for the two DNS methods, including variances and power spectra, were very similar, but the AGE simulation required much less computational effort. Small‐scale information was lost in the reduced resolution runs, but large‐scale mean and instantaneous properties were reproduced quite well, with further large reductions in computational effort. Quality of results becomes more sensitive to the value chosen for one of the AGE method parameters as resolution is reduced, from which it is inferred that the numerical stability procedure controlled by the parameter is acting in part as a sub‐grid‐scale model. Copyright © 2002 John Wiley & Sons, Ltd.     

Applications of coupled LC-GC: A review

Although coupled liquid chromatographygas chromatography (LC-GC) was first demonstrated ten years ago, only in the last few years has there been a sudden surge of interest in the technique. Approximately 70% of the total number of LC-GC applications have been published in the last two years (1987–88) alone. This review categorizes LC-GC publications into four main application areas: fossil fuels, foods, environmental samples, biologiical/pharmaceutical samples, and miscellaneous samples. Multidimensional separations carried out using other coupled-column chromatographic techniques (such as supercritical fluid chromatography (SFC) with GC, and on-line trace enrichment-GC) have also been included in this review.     

Observation of the nonlinear effect in relativistic Thomson scattering of electron and laser beams

Thomson scattering of high-power laser and electron beams is a good test of electrodynamics in the high-field region. We demonstrated production of high-intensity X-rays in the head-on collision of a CO₂ laser and 60-MeV electron beams at Brookhaven National Laboratory, Accelerator Test Facility. The energy of an X-ray photon was limited at 6.5 keV in the linear (lowest order) Thomson scattering, but the nonlinear (higher order) process produces higher energy X-rays. We measured the angular distribution of the high-energy X-rays and confirmed that it agrees with theoretical predictions.     

General strategy for a short and efficient synthesis of 3-hydroxy-4-methylprolines (HMP)

The non-proteinogenic amino acid 3-hydroxy-4-methylproline (HMP) is an active constituent of some potent antimicrobials including echinocandins, nostopeptins, pneumocandins, sporiofungin and mulundocandins. A synthesis has been achieved in 10 steps with 29% overall yield; the Evans’ aldol reaction using Crimmins’ modified method was pivotal to the success of the strategy.     

Standard enthalpy of formation of La2CoO4(cr)

The enthalpies of reactions of La₂CoO₄(cr) and CoCl₂(cr) with hydrochloric acid were measured with an isothermal-jacket calorimeter. The results obtained and the available literature data were used to calculate the standard enthalpy of formation of La₂CoO₄(cr) at 298.15 K, Δ_f H ^o = ?2179 ± 7 kJ/mol.     

On construction of symmetries from integrals of hyperbolic partial differential systems

An algorithm is proposed which allows one to construct higher symmetries of arbitrary order for some special classes of hyperbolic systems possessing integrals. The Pohlmeyer-Lund-Regge system and the open two-dimensional Toda lattices are shown to belong to the class of systems where our algorithm is applicable. __________ Translated from Fundamental’naya i Prikladnaya Matematika (Fundamental and Applied Mathematics), Vol. 10, No. 1, Geometry of Integrable Models, 2004.     

The study and applications of photochemical-dynamical gravity wave model I

A two-dimensional, nonlinear, compressible, diabatic, nonhydrostatic photochemical-dynamical gravity wave model has been advanced. The model includes diabetic process produced by photochemistry and the effect of gravity wave on atmospheric chemical species. In the horizontal direction, the pseudospectral method is used. The finite difference approximations are used in vertical direction z and time t. The FICE method is used to solve the model. The model results on small amplitude fluctuation are very close to those of linear theory, which demonstrates the correctness of the model.

     

Portable and Automatic Mössbauer Analysis

A portable Mössbauer spectrometer, developed for extraterrestrial applications, opens up new industrial applications of MBS. But for industrial applications, an available tool for fast data analysis is also required, and it should be easy to handle. The analysis of Mössbauer spectra and their parameters is a barrier for the popularity of this wide-applicable spectroscopic technique in industry. Based on experience, the analysis of a Mössbauer spectrum is time-consuming and requires the dedication of a specialist. However, the analysis of Mössbauer spectra, from the fitting to the identification of the sample phases, can be faster using by genetic algorithms, fuzzy logic and artificial neural networks. Industrial applications are very specific ones and the data analysis can be performed using these algorithms. In combination with an automatic analysis, the Mössbauer spectrometer can be used as a probe instrument which covers the main industrial needs for an on-line monitoring of its products, processes and case studies. Some of these real industrial applications will be discussed.