New 2-aminoethylimidazole-based dicarboxylic acid receptor derived from cholestane

A new facial amphiphile cholestane-based receptor 1 containing a 2-imidazolylethylamino moiety at the 3α and 7α positions of cholestane was synthesized. Recognition selectivity of the new receptor 1 with various dicarboxylic acids was assessed by ¹H NMR titration. Maleic acid showed the highest binding constant among all the tested acids (K_a = 9.36 × 10⁴ M⁻¹).     

Novel AB crosslinked polymer networks from telechelic 4‐vinylbenzyl carbamate terminated polyurethanes and different vinyl monomers

Novel AB crosslinked polymer (ABCP) networks were synthesized from telechelic 4‐vinylbenzyl carbamate terminated polyurethanes and monomers such as styrene, 4‐vinylpyridine, methyl methacrylate and butyl acrylate. Telechelic 4‐vinylbenzyl carbamate terminated polyurethanes were synthesized from polypropylene glycol‐based NCO‐terminated polyurethane and vinylbenzyl alcohol. Effect of changing the molecular weight of polypropylene glycol on the static and dynamic mechanical properties of ABCP networks from polyurethane‐polymethyl methacrylate was studied in detail. Dynamic mechanical thermal analysis results show that polymethyl methacrylate and polystyrene‐based ABCPs have good damping over a broad temperature range. ABCP networks prepared from 4‐vinylbenzyl carbamate terminated polyurethane and different monomers such as methyl methacrylate, butyl acrylate and styrene exhibit single tan δ_max value which implies excellent interlocking between the two polymers present in the ABCP networks. Static mechanical studies showed that methyl methacrylate and styrene‐based ABCP networks exhibit better tensile properties compared to other ABCP networks from butyl acrylate and 4‐vinyl pyridine monomers. Thermogravimetric analysis results revealed that the ABCP networks showed an improved thermal stability. Copyright © 2009 John Wiley & Sons, Ltd.     

On stationary convection and oscillatory motions in ferromagnetic convection in a ferrofluid layer

It is shown analytically that the ‘principle of the exchange of stabilities’ (PES), in general, is not valid in ferromagnetic convection in a ferrofluid layer, for the case of free boundaries and hence a sufficient condition is derived for the validity of the PES. Upper bounds for the complex growth rate are then obtained. It is proved that the complex growth rate σ=σ_r+iσ_i (where σ_r and σ_i are, respectively, the real and imaginary parts of σ) of an arbitrary oscillatory motion of growing amplitude, in ferromagnetic convection in a ferrofluid layer, for the case of free boundaries lies inside a semicircle in the right half of the σ_rσ_i-plane whose center is at the origin and ²(radius)=RM₁/P_r, where R is the Rayleigh number,M₁ is the magnetic number and P_r is the Prandtl number. Further, bounds for the case of rigid ferromagnetic boundaries are also derived separately.     

Photoredox-Catalyzed Labeling of Hydroxyindoles with Chemoselectivity (PhotoCLIC) for Site-Specific Protein Bioconjugation

We have developed a novel visible-light-catalyzed bioconjugation reaction, PhotoCLIC, that enables chemoselective attachment of diverse aromatic amine reagents onto a site-specifically installed 5-hydroxytryptophan residue (5HTP) on full-length proteins of varied complexity. The reaction uses catalytic amounts of methylene blue and blue/red light-emitting diodes (455/650 nm) for rapid site-specific protein bioconjugation. Characterization of the PhotoCLIC product reveals a unique structure formed likely through a singlet oxygen-dependent modification of 5HTP. PhotoCLIC has a wide substrate scope and its compatibility with strain-promoted azide-alkyne click reaction, enables site-specific dual-labeling of a target protein.     

Making and Breaking of C−N Bonds: Applications in the Synthesis of Unsymmetric Tertiary Amines and α-Amino Carbonyl Derivatives

An operationally simple process has been developed for the synthesis of unsymmetrical amines and α-amino carbonyl derivatives in the absence of a catalyst, ligand, oxidant, or any additives. Contrary to known reductive amination methods, this protocol is amenable to substrates containing other reducible groups. This process effectively results in consecutive cleavage and formation of C−N bonds. DFT studies and Hammett analysis provide useful insight into the mechanism. The role of noncovalent interactions as a stabilizing factor have been examined in the protocol. A wide range of alkyl-bromides have been coupled efficiently with a variety of dimethyl anilines to get unsymmetric tertiary amines with yields up to 90%. This methodology was further extended to the synthesis of α-amino carbonyl derivatives with yields up to 93%.     

An Efficient Opal-Suppressor Tryptophanyl Pair Creates New Routes for Simultaneously Incorporating up to Three Distinct Noncanonical Amino Acids into Proteins in Mammalian Cells**

Site-specific incorporation of multiple distinct noncanonical amino acids (ncAAs) into proteins in mammalian cells is a promising technology, where each ncAA must be assigned to a different orthogonal aminoacyl-tRNA synthetase (aaRS)/tRNA pair that reads a distinct nonsense codon. Available pairs suppress TGA or TAA codons at a considerably lower efficiency than TAG, limiting the scope of this technology. Here we show that the E. coli tryptophanyl (EcTrp) pair is an excellent TGA-suppressor in mammalian cells, which can be combined with the three other established pairs to develop three new routes for dual-ncAA incorporation. Using these platforms, we site-specifically incorporated two different bioconjugation handles into an antibody with excellent efficiency, and subsequently labeled it with two distinct cytotoxic payloads. Additionally, we combined the EcTrp pair with other pairs to site-specifically incorporate three distinct ncAAs into a reporter protein in mammalian cells.     

Nanohybrid Comprising Gold Nanoparticles – MoS2 Nanosheets for Electrochemical Sensing of Folic Acid in Serum Samples

Folic acid (FA) deficiency is associated with several clinical conditions such as megaloblastic anemia, neuropsychiatric, and pregnancy-related syndromes, this makes FA an important metabolite to be monitored. We have fabricated an electrochemical biosensor based on gold nanoparticles decorated molybdenum disulfide nanosheets (AuNPs−MoS₂NSs) nanocomposite as a transducer matrix for specific and rapid electrochemical detection of FA. Differential pulse voltammetry (DPV) studies displayed a rapid analytical response of the fabricated AuNPs−MoS₂NSs/GCE sensor probe towards FA in a wide concentration range of 0.001–100 μM with a very low detection limit of 0.72±0.03 nM. The selectivity of the fabricated sensor probe has been examined in the presence of interferents such as dopamine, uric acid, ascorbic acid, glucose, and urea. The clinical potential of the fabricated biosensor was established by monitoring FA in human serum samples. The developed AuNPs−MoS₂NSs/GCE sensor probe showed high reproducibility and stability, indicating its promise for FA detection in clinical settings.     

3D-printed Electrochemical Sensor for Organophosphate Nerve Agents

3D-printing has revolutionized various industries and scientific research by its substantial benefits such as fast prototyping, high accuracy, durability, and customized shapes. Fused deposition modeling has been used in the fabrication of 3D-printed nanocarbon electrodes. Utilization of these 3D-printed nanocarbon electrodes in the identification of organophosphates (OPs) such as parathion, methyl parathion, paraoxon, and fenitrothion, has not been reported. These compounds are highly toxic and used as chemical warfare agents and pesticides. Herein, we show that 3D-printing can be utilized for low-cost and diagnosis of priority nerve agents.     

Room-Temperature Dialkylamination of Chloroheteroarenes Using a Cu(II)/PTABS Catalytic System

The dimethylamino functionality has significant importance in industrially relevant molecules and methodologies to install these efficiently are highly desirable. We report herein a highly efficient, room-temperature dimethylamination of chloroheteroarenes performed via the in-situ generation of dimethylamine using N,N-dimethylformamide (DMF) as precursor wiith a large substrate scope that includes various heteroarenes, purines as well as commercially relevant drugs such as altretamine, ampyzine and puromycin precursor.