Hydrothermal processing of waste pine wood into industrially useful products

An ongoing major outbreak of mountain pine beetle in Western Canada has provided a clear opportunity to utilize waste pinewood as a source of renewable energy. Therefore hydrothermal processing of waste pinewood as a feedstock for bio-oil and biochar production using subcritical and supercritical water technology was carried out in semi-batch mode to investigate the effect of pressure (200–400 bar) and temperature (300–400 °C) on the yield and composition of bio-oil. The pinewood samples have very high cellulose and hemicellulose content but low ash content and are thus a formidable feedstock for bioenergy production. The optimum conditions for the hydrothermal processing of the pinewood in a tubular reactor were found to be 400 °C and 250 bars with respect to biochar and bio-oil yield based on the highest calorific value analysis. Detailed characterization of bio-oil and biochar was performed using GCMS, NMR, SEM, calorific value, and elemental analysis, respectively. The critical components of bio-oil were found to be phenols, methoxyphenols, hydroxymethyl furfural (HMF), and vanillin, whereas as compared to the raw pine wood, the biochar was considerably lower H:C and O:C ratios than those of the unprocessed pinewood. The analyses of bio-oil by means of GCMS and ¹H NMR showed that it was mainly composed of heterocyclic compounds, phenols, aldehydes and acids.     

Effects of Dielectric Barrier Discharge Plasma on Physicochemical Characteristics,Mechanical Properties and Biocompatibility of Silk/PVA Nanofibers

Plasma Chemistry and Plasma Processing - This work reports an investigation of the discharge characteristics of atmospheric dielectric barrier discharge (DBD) plasma in terms of I-V curves and...     

Synthesis and characterization of some acetoxime-modified hetero-metal alkoxide precursors of zinc(II) and aluminum(III) for sol–gel transformation to nano-sized ZnAl2O4

Reactions of [ZnAl₂(OPr_i)₈] [A] with acetoxime in different molar ratios in refluxing anhydrous benzene, yield complexes of the type [ZnAl₂(OPrⁱ)_8?n{(CH₃)₂CNO}_n] {where, n = 1–4}. All the complexes are transparent viscous/foamy solids. They were characterized by elemental analyses, FT-IR and NMR (¹H, ¹³C {¹H}) spectral studies. ²⁷Al NMR spectrum of [ZnAl₂(OPrⁱ)₄{(CH₃)₂CNO}₄] [4] in CDCl₃ suggests presence of four coordination around both the aluminum atoms. IR spectra suggest that the oximato ligands bind the aluminum atoms in a side on manner in all the complexes. The ESI-mass spectrum of the representative derivative [4] suggests its monomeric nature while the thermo-gravimetric curve shows its low thermal stability. Sol–gel transformations of the precursors (A), (1), and (4) yielded nano-sized ZnAl₂O₄ samples (a), (b) and (c) at ~500 °C, respectively. The XRD patterns of (a), (b) and (c) indicate formation of cubic phase nano-sized zinc aluminate in all the samples. Surface morphologies of these samples were investigated by SEM images. IR spectra as well as EDX analyses indicate formation of pure zinc aluminate in all the cases. TEM image of sample (c) shows spherical (~5–8 nm) morphology.     

Phosphine-Catalyzed [4+1] Cycloadditions of Allenes with Methyl Ketimines,Enamines, and a Primary Amine

Unprecedented phosphine-catalyzed [4+1] cycloadditions of allenyl imides have been discovered using various N-based substrates including methyl ketimines, enamines, and a primary amine. These transformations provide a one-pot access to cyclopentenoyl enamines and imines, or (chiral) γ-lactams through two geminal C−C bond or two C−N bond formations, respectively. Several P-based key intermediates including a 1,4-(bis)electrophilic α,β-unsaturated ketenyl phosphonium species have been detected by ³¹P NMR and HRMS analyses, which shed light on the postulated catalytic cycle. The synthetic utility of this new chemistry has been demonstrated through a gram-scaling up of the catalytic reaction as well as regioselective hydrogenation and double condensation to form cyclopentanoyl enamines and fused pyrazole building blocks, respectively.     

Identification and characterization of impurities in an insecticide,bifenthrin technical

The HPLC‐DAD and GC/MS methods were successfully used for the identification and characterization of the impurities in an agrochemical insecticide, bifenthrin technical. Three impurities ranging from 0.175%–0.541% were detected by the HPLC‐DAD method. The LC/MS technique with ESI or APCI source failed to detect the impurities detected by HPLC‐DAD, due to lack of ionization in ESI or APCI. The three impurities were enriched by prep‐HPLC, and then their structures were elucidated based on the GC/EIMS and CIMS data. The EI mass spectra of bifenthrin and its impurities displayed molecular ion and provided structure indicative fragment ions; the CIMS data further confirmed their molecular weight. The identity of the impurity 1 was further confirmed by the synthesis of the authentic sample followed by NMR and GC/MS data.     

Optimization of ultrasound-assisted extraction of phenolic compounds from Sesamum indicum

Abstract

Effective extraction of phyto-biomolecules insures retaining maximum functionality along with higher recovery. In this study, ultrasound-solvent assisted extraction (USAE) was employed for optimal extraction of phyto-biomolecules from Sesamum indicum (sesame) leaves using the approach of Response Surface Methodology (RSM). The optimized condition of 200?W power, 59% methanol concentration with 1:14?g/mL solid–liquid ratio and 15?min of extraction time yielded 367.39?±?1.85?mg GAE/100?g of total phenolic content, 96.72?±?3.27% of free radical scavenging activity and 81.20?±?2.87% of iron chelating activity respectively. The extract consist of essential phytocomponents like gallic acid, chlorogenic acid, and quercetin with lipid peroxidation activities of >50% over incubation time of 48?h. Also, showed antimicrobial activity against various Gram’s negative and positive food borne pathogens. The results of this study implied the importance of USAE for effective and optimum recovery of phyto-biomolecules from Sesame leaves with retained functional properties.     

Stereoselective synthesis of beta-substituted phenylalanine-beta-phenylisoserine-derived tripeptides using N-cinnamoyl-L-proline as template: synthesis of structural analogues of HIV protease inhibitors

N-Cinnamoyl-L-proline can be used as a template on which beta-substituted phenylalanine and beta-phenylisoserine residues can be synthesized leading to tripeptide derivatives as structural analogues of HIV protease inhibitors.