Cadmium(II) and mercury(II) complexes of an NO2S2-donor macrocycle and its ditopic xylyl-bridged analogue

The NO2S2-donor macrocycle (L1) was synthesised from the ring closure reaction between Boc-N-protected 2,2'-iminobis(ethanethiol) (3) and 2,2'-(ethylenedioxy)bis(benzyl chloride) (4) followed by deprotection of the Boc-group. alpha,alpha'-Dibromo-p-xylene was employed as a dialkylating agent to bridge two L1 to yield the corresponding N-linked product (L2). The X-ray structure of L2 (as its HBr salt) is described. A range of Cd(II) and Hg(II) complexes of L1 (6-9) and L2 (10-12) were prepared and characterised. Reaction of HgX2 (X = Br or I) with L1 afforded [Hg(L1)Br]2[Hg2Br6].2CH2Cl2 6 and [Hg(L1)I(2)] 7, respectively. For 6, the Hg(II) ion in the complex cation has a distorted tetrahedral coordination environment composed of S2N donor atoms from L1 and a bromo ligand. In 7 the coordination geometry is highly distorted tetrahedral, with the macrocycle coordinating in an exodentate manner via one S and one N atom. The remaining two coordination sites are occupied by iodide ions. [Hg(L1)(ClO4)]ClO4 8 was isolated from the reaction of Hg(ClO4)2 and L1. The X-ray structure reveals that all macrocyclic ring donors bind to the central mercury ion in this case, with the latter exhibiting a highly distorted octahedral coordination geometry. The O2S2-donors from the macrocyclic ring define the equatorial plane while the axial positions are occupied by the ring nitrogen as well as by an oxygen from a monodentate perchlorato ion. Reaction of Cd(NO3)(2).4H2O with L1 afforded [Cd(L1)(NO3)2](.)0.5CH2Cl2 9 in which L1 acts as a tridentate ligand, binding exo-fashion via its S2N donors. The remaining coordination positions are filled by two bidentate nitrate ions such that, overall, the cadmium is seven-coordinate. Reactions of HgX2(X = Br or I) with L2 yielded the isostructural 2 : 1 (metal : ligand) complexes, [Hg2(L2)Br4] 10 and [Hg2(L2)I(4)] 11. Each mercury ion has a distorted tetrahedral environment made up of S and N donors from an exodentate L2 and two coordinated halides. Contrasting with this, the reaction of L2 with Cd(NO3)(2).4H2O yielded a 1-D coordination network, {[Cd2(L2)(NO3)4].2CH2Cl2}n 12 in which each ring of L2 is exo-coordinated via two S atoms and one N atom to a cadmium ion which is also bound to one monodentate and one bidentate nitrate anion. The latter also has one of its oxygen atom attached to a neighboring cadmium via a nitroso (mu2-O) bridge such that the overall coordination geometry about each cadmium is seven-coordinate. The [Cd(L2)0.5(NO3)2] units are linked by an inversion to yield the polymeric arrangement.     

Alkylation of 4,5-dichloropyridazin-6-one with α,ω-dibromoalkanes or 4,5-dichloro-1-(ω-bromoalkyl)pyridazin-6-ones

Alkylations of 4,5-dichloropyridazin-6-one (1) with dibromoalkanes 2 or 3 in the presence of potassium carbonate or tetrabutylammonium bromide/potassium hydroxide were investigated under restricted condition. Reactions of 1 with 2 or 3, except for 2b and 3b , in the presence of potassium carbonate or tetrabutylammonium bromide/potassium hydroxide gave only the N-alkylation products 3 and/or 4. Alkylation of 1 with 2b or 3b in the presence of potassium carbonate yielded the N-alkylation products 3b and/or 4b and the O-alkylation product 5 as the main product, whereas treatment of 1 with 2b or 3b in the presence of tetrabutylammonium bromide/potassium hydroxide afforded selectively the N-alkylation products 3b and/or 4b.     

A polymer-based microfluidic device for immunosensing biochips

This paper describes the design, fabrication, and test of a PDMS/PMMA-laminated microfluidic device for an immunosensing biochip. A poly(dimethyl siloxane)(PDMS) top substrate molded by polymer casting and a poly(methyl methacrylate)(PMMA) bottom substrate fabricated by hot embossing are bonded with pressure and hermetically sealed. Two inlet ports and an air vent are opened through the PDMS top substrate, while gold electrodes for electrochemical biosensing are patterned onto the PMMA bottom substrate. The analyte sample is loaded from the sample inlet port to the detection chamber by capillary force, without any external intervening forces. For this and to control the time duration of sample fluid in each compartment of the device, including the inlet port, diffusion barrier, reaction chamber, flow-delay neck, and detection chamber, the fluid conduit has been designed with various geometries of channel width, depth, and shape. Especially, the fluid path has been designed so that the sample flow naturally stops after filling the detection chamber to allow sufficient time for biochemical reaction and subsequent washing steps. As model immunosensing tests for the microfluidic device, functionalizations of ferritin and biotin to the sensing surfaces on gold electrodes and their biospecific interactions with antiferritin antiserum and streptavidin have been investigated. An electrochemical detection method for immunosensing by biocatalyzed precipitation has been developed and applied for signal registration. With the biochip, the whole immunosensing processes could be completed within 30 min.     

Strength of fibers from wholly aromatic polyesters

A theory of the strength (or the tenacity) of highly oriented Liquid Crystal Polymer (LCP) fibers was developed, and its results were compared with existing tensile strength data of fibers of a copolymer of 1,4-oxybenzoate and 6,2-oxynaphthoate. A basic premise of the theory is that the mechanical load transfer between polymer chains is through intermolecular interaction which acts in a manner similar to that of shear stress, and that the fiber strength is primarily governed by the intermolecular adhesion strength. The theory also incorporates the effects of MW, MW distribution, and the chain orientation distribution. Analysis of the experimental tenacity data demonstrates that the present theory can quantitatively describe the variation of the tenacity of LCP fibers with MW both in the as-spun and in the heat-treated states. The theory further predicts that the predominant factor governing the tenacity of LCP fibers is primarily due to MW increase due to solid-state polymerization. It is also demonstrated that the intermolecular adhesion between LCP chains is relatively weak and does not improve with heat treatment. The absence of factors that limit the MW increase (i.e, imbalanced end-groups and side reactions of end groups) is a prerequisite for fast heat treatment of a LCP fiber to a high tenacity.Symbols A _f the cross-sectional area of a single polymer chain - E _f the theoretical modulus of a polymer chain - G _m the shear modulus of fiber - h(l) the chain length distribution function - l the chain length - l the number average chain length - l _c the length of chain units that are bonded to adjacent polymer chains - n ² 4G _m/CE_f - N _c the number of polymer chains per unit area perpendicular to the fiber axis - P _b the probability that a chain does not have a chain end in the fracture zone - P _e the probability that a chain has, at least, a chain end in the fracture zone - q _e,q _b the probability of finding an ending and a bridging polymer chain, respectively, in the fracture zone - l the length of fracture zone - the elongation of a polymer chain - the chain orientation angle - _f the normal stress that acts on a polymer chain - _fu the fiber tenacity - _e the shear stress that acts on a polymer chain surface Dedicated to Prof. Dr. rer. nat. Wolfgang Hilger, Chairman of Hoechst A.G. in honor of his 60th birthday     

A J-aggregated nanoporphyrin overcoming phototoxic side effects in superior phototherapy with two-pronged effects

Phototherapy has been a promising therapeutic modality for pathological tissue due to its spatiotemporal selectivity and non-invasive characteristics. However, as a core component of phototherapy, a single photosensitizer (PS) nanoplatform integrating excellent therapeutic efficiency and minimal side effects remains an urgent but unmet need. Here, we construct a J-aggregated nano-porphyrin termed MTE based on the self-assembly of methyl-pheophorbide a derivative MPa-TEG (MT) and natural polyphenolic compound epigallocatechin gallate (EGCG). Due to the synergistic interaction between similar large π-conjugated structural EGCG and MT, MTE with small and uniform size is obtained by effectively hindering Ostwald ripening of MT. Noteworthily, MTE not only effectively avoids the inadvertent side effects of phototoxicity during transport thank to the ability of reactive oxygen species (ROS) scavenging, but also achieves two-pathway augmented superior phototherapy: (1) enhancing photodynamic therapy (PDT) via inhibiting the expression of anti-apoptosis protein surviving; (2) achieving adjuvant mild-temperature laser interstitial thermal therapy (LITT) via reducing the tumor thermoresistance on account that MTE inhibits the overexpression of HSP 70 and HSP 90. This research not only offers a facile strategy to construct multicomponent nanoplatforms but also provides a new pathway for efficient and low-toxicity phototherapy, which is beneficial to the future clinical application.

J-aggregated nanoporphyrin (MTE) integrates minimal side effects and two-pathway augmented superior phototherapy: enhancing photodynamic therapy (PDT) and achieving adjuvant mild-temperature laser interstitial thermal therapy (LITT).     

Physicochemical,Structural, and In Vitro Gastrointestinal Tract Release Properties of Sodium Alginate-Based Cryogel Beads Filled with Hydroxypropyl Distarch Phosphate as a Curcumin Delivery System

The objectives of this study were to produce sodium alginate (SA)-based cryogel beads filled with different concentrations (0, 0.4, 1.0, and 2.5%, w/w) of hydroxypropyl distarch phosphate (HDP) as a curcumin delivery system and to investigate the physicochemical, structural, and in vitro gastrointestinal tract release properties of the cryogel beads. According to FT-IR analysis, the formation of ionic crosslinking between SA and Ca²⁺ and the presence of HDP were found. XRD analysis demonstrated the successful encapsulation of curcumin in the beads by observing the disappearance of the characteristic peaks of curcumin. SEM analysis results revelated that SA-based cryogel beads exhibited a denser internal structure as the HDP concentration was increased. The encapsulation efficiency of curcumin in SA cryogel beads filled with HDP concentration from 0% to 2.5% was increased from 31.95% to 76.66%, respectively, indicating that HDP can be a suitable filler for the encapsulation of curcumin in the production of SA-based cryogel beads. After exposure to simulated gastric fluid (SGF) and simulated intestinal fluid (SIF), the release rate of curcumin was decreased as HDP concentration was increased. Accordingly, SA-based cryogel beads filled with HDP can be utilized for the delivery system of curcumin in the food industry.