Synthesis and properties of phenothiazylene vinylene‐based polymers: New organic semiconductors for field‐effect transistors and solar cells

A series of new phenothiazylene vinylene‐based semiconducting polymers, poly[3,7‐(4′‐dodecyloxyphenyl)phenothiazylene vinylene] ( P1 ), poly[3,7‐(4′‐dodecyloxyphenyl)phenothiazylene vinylene‐alt‐1,4‐phenylene vinylene] ( P2 ), and poly[3,7‐(4′‐dodecyloxyphenyl)phenothiazylene vinylene‐alt‐2,5‐thienylene vinylene] ( P3 ), have been synthesized via a Horner‐Emmons reaction. FTIR and ¹H NMR spectroscopies confirmed that the configurations of the vinylene groups in the polymers were all‐trans (E). The weight‐averaged molecular weights (M_w) of P1 , P2 , and P3 were found to be 27,000, 22,000, and 29,000, with polydispersity indices of 1.91, 2.05, and 2.25, respectively. The thermograms for P1 , P2 , and P3 each contained only a broad glass transition, at 129, 167, and 155 °C, respectively, without the observation of melting features. UV–visible absorption spectra of the polymers showed two strong absorption bands in the ranges 315–370 nm and 450–500 nm, which arose from absorptions of the phenothiazine segments and the conjugated main chains. Solution‐processed field‐effect transistors fabricated from these polymers showed p‐type organic thin‐film transistor characteristics. The field‐effect mobilities of P1 , P2 , and P3 were measured to be 1.0 × 10^?4, 3.6 × 10^?5, and 1.0 × 10^?3 cm² V^?1 s^?1, respectively, and the on/off ratios were in the order of 10² for P1 and P2 , and 10³ for P3 . Atomic force microscopy and X‐ray diffraction analysis of thin films of the polymers show that they have amorphous structures. A photovoltaic device in which a P3 /PC₇₁BM (1/5) blend film was used as the active layer exhibited an open‐circuit voltage (V_OC) of 0.42 V, a short circuit current (J_SC) of 5.17 mA cm^?2, a fill factor of 0.35, and a power conversion efficiency of 0.76% under AM 1.5 G (100 mW cm^?2) illumination. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 635–646, 2010     

A Superhydrophobic Surface Fabricated by an Electrostatic Process

We describe the fabrication of a biomimically designed superhydrophobic poly(ε‐caprolactone) surface, which was obtained using a modified electrostatic process. The fabricated surface exhibits a micron‐sized pyramid structure consisting of accumulated droplets and nanofibres. By using this simple one‐step process, we can achieve a superhydrophobic surface having both a high water contact angle and low threshold sliding angle, similar to that of the superhydrophobic plant leaf.

     

A Highly Reactive and Sinter-Resistant Catalytic System Based on Platinum Nanoparticles Embedded in the Inner Surfaces of CeO(2) Hollow Fibers

Ceria (CeO(2) ) hollow fibers with Pt nanoparticles (Pt?NPs) embedded in their inner surfaces were prepared by sequentially depositing Pt?NPs and CeO(2) sheaths on electrospun fibers of polystyrene, followed by calcination in air at 400?°C. Despite a relatively low Pt loading in this system, the turnover frequency for CO oxidation was 2-3 orders of magnitude higher than those of other systems, and the reactivity was also stable up to 700?°C.     

Metal‐Ion Metathesis in Metal–Organic Frameworks: A Synthetic Route to New Metal–Organic Frameworks

A porous metal–organic framework, Mn(H₃O)[(Mn₄Cl)₃(hmtt)₈] (POST‐65), was prepared by the reaction of 5,5′,10,10′,15,15′‐hexamethyltruxene‐2,7,12‐tricarboxylic acid (H₃hmtt) with MnCl₂ under solvothermal conditions. POST‐65(Mn) was subjected to post‐synthetic modification with Fe, Co, Ni, and Cu according to an ion‐exchange method that resulted in the formation of three isomorphous frameworks, POST‐65(Co/Ni/Cu), as well as a new framework, POST‐65(Fe). The ion‐exchanged samples could not be prepared by regular solvothermal reactions. The complete exchange of the metal ions and retention of the framework structure were verified by inductively coupled plasma–atomic emission spectrometry (ICP‐AES), powder X‐ray diffraction (PXRD), and Brunauer–Emmett–Teller (BET) surface‐area analysis. Single‐crystal X‐ray diffractions studies revealed a single‐crystal‐to‐single‐crystal (SCSC)‐transformation nature of the ion‐exchange process. Hydrogen‐sorption and magnetization measurements showed metal‐specific properties of POST‐65.     

Synthesis and Surface-Active Properties of New Photosensitive Surfactants Containing the Azobenzene Group

Several water-soluble cationic surfactants, 4-alkylazobenzene-4'-(oxy-2-hydroxypropyl)trimethylammonium methylsulfate (AZMS) (AZMS-0, AZMS-1, AZMS-2, AZMS-4, and AZMS-8), containing alkylglycidylether and azoarene have been synthesized with high yields of 63-78% and their surface-active properties have been investigated upon irradiation with UV/vis light. All of the trans-AZMS surfactants are isomerized to cis-trans mixtures containing 92.5% cis isomer by UV light irradiation at 350 nm. The cis isomers in the mixtures are reverted to trans isomers by visible light irradiation (lambda>445 nm). Such photoisomerization induces changes in the surface activity of each surfactant. The critical micelle concentration (cmc) of the trans form of AZMS-8 surfactant is about 1.28x10(-4) mol/l. At the photostationary state, 92.5% of the trans form is changed to the cis form which exhibits a slightly higher cmc (3.41x10(-4) mol/l). The new cmc of AZMS surfactants upon photoisomerization is similar to that of the ideal mixed micellar system. In particular, the ratio of cmc(cis) to cmc(trans) of AZMS derivatives is about 1.87-2.85 which increases proportionally with the chain length of alkyl group. The minimum average area per molecule (A(min)(a/w)) for the trans and cis isomers of AZMS-8 is 0.60 and 0.74 nm(2), respectively. The difference in the A(min)(a/w) may originate from the structural differences in the two isomers. These values are quite different as compared to those of the conventional azobenzene surfactants. Copyright 2000 Academic Press.     

Modeling of the Permeate Flux during Microfiltration of BSA-Adsorbed Microspheres in a Stirred Cell

A study on the variation of the permeate flux was performed in a stirred cell charged with microspheres, to investigate the effects of the stirrer speeds (300, 400, and 600 rpm) and the BSA concentration (0.1, 0.2, 0.4, and 0.8 g/L) under constant pressure. The permeate flux increased over time before the saturation point, but it began to decrease after that point. An increase of the BSA concentration and the stirrer speed resulted in the rapid increase of the permeate flux. This is contrary to the observation of the conventional filtration experiments using a stirred cell. A resistance-in-series model was employed for the modeling of the permeate flux. The cake resistance (R(c), induced by the concentration polarization of microspheres) and the fouling resistance (R(f), induced by the adsorption of BSA inside the membrane pore) must be considered simultaneously for the modeling. These modeling results were in good agreement with the experimental data. These can be applied to the special system considering both R(c) and R(f) as well as the general filtration systems using a stirred cell. Copyright 2000 Academic Press.     

Biocatalytic precipitation induced by an affinity reaction on dendrimer-activated surfaces for the electrochemical signaling from immunosensors

We have developed a strategy of signal generation for immunosensors that transduces biospecific affinity recognition reactions into electrochemical signals. The cyclic voltammetric method, tracking the precipitation of insoluble products onto the sensing surface and the subsequent decrement in the electrode area, was chosen for signal registration. Precipitation of insolubilities was induced by the catalytic reaction of enzymes, which were labeled to the biospecifically attached protein or antibody molecules. As a model system for affinity recognition, we have investigated the functionalization of biotin groups to the sensing monolayer and their biospecific interactions with anti-biotin antibody molecules. The immunosensing interface was developed onto the dendrimer-activated self-assembled monolayers (SAMs), as the base template for the functionalization of the antigen moiety and signal generation. The advantages of using dendrimer-activated SAMs in comparison to the plain modified thiolate SAMs for the sensing surface were shown in terms of sensing performances, and the analytical characteristics of the resulting immunosensor were examined. Additionally, the sensing system was applied for biotin/(strept)avidin couples, extending the applicability of the developed strategy.     

Efficient synthesis of 4-aminoquinazoline and thieno[3,2-d]pyrimidin-4-ylamine derivatives by microwave irradiation

[reaction: see text] A simple, efficient, and high-yielding synthesis of quinazolin-4-ylamine and thieno[3,2-d]pyrimidin-4-ylamine derivatives is reported under microwave irradiation conditions. Reaction conditions including temperature, solvent, and reaction time have been studied. An efficient parallel workup procedure was developed to generate a small library (23 compounds) in a short time period.     

Ruthenium‐catalyzed synthesis of quinolines via reductive heteroannulation of nitroarenes with 3‐amino‐1‐propanols

Nitroarenes are reductively cyclized with 3‐amino‐1‐propanols in dioxane/H₂O in the presence of a ruthenium catalyst and tin(II) chloride dihydrate together with isopropanol to afford the corresponding quinolines. A reaction pathway involving initial reduction of nitroarenes to anilines, propanol group transfer from 3‐amino‐1‐propanols to anilines, N‐alkylation of anilines by 3‐anilino‐1‐propanols and heteroannulation of 1,3‐dianilinopropanes is proposed.