HPLC Method for the Simultaneous Determination of the UV-Filters Butyl Methoxy Dibenzoylmethane and Octocrylene in the Presence of Their Photodegradants

Butyl methoxy dibenzoylmethane (BMDM) and octocrylene (OC), common UV-filters in sunscreen products are often used in combination. Together they provide broad spectrum photoprotection from exposure to both UVA- and UVB-light. These UV-filters may, however, undergo photodegradation and generate photodegradants, resulting in a potential loss of photoprotection. It is thus a concern that the photostability testing as described by the ICH Guideline Q1B is not a requirement for sunscreen products in Australia, Europe or the USA. UV-filter photodegradants have in addition been shown to be toxic, highlighting the importance of their separation from the parent UV-filters. An HPLC method was developed and validated to quantitatively determine a combination of these UV-filters in the presence of their photodegradants. Reverse-phase chromatography was employed, using a C18 column and an isocratic mobile phase consisting of methanol/water/acetic acid (89/10/1 v/v). Validation according to the ICH guidelines for linearity, accuracy, precision, sensitivity, specificity and robustness was confirmed. The developed and validated method was then successfully applied to the determination of BMDM and OC in an aqueous cream base, typically used in sunscreens, after photostability testing, according to the ICH Guideline Q1B. In addition, the diketo-enol ratio of BMDM in methanol-d ₄ was determined by NMR and the two major photodegradants were identified by FTMS and LC–MS.

     

HPLC Method for the Simultaneous Determination of the UV-Filters Butyl Methoxy Dibenzoylmethane and Octocrylene in the Presence of Their Photodegradants

Butyl methoxy dibenzoylmethane (BMDM) and octocrylene (OC), common UV-filters in sunscreen products are often used in combination. Together they provide broad spectrum photoprotection from exposure to both UVA- and UVB-light. These UV-filters may, however, undergo photodegradation and generate photodegradants, resulting in a potential loss of photoprotection. It is thus a concern that the photostability testing as described by the ICH Guideline Q1B is not a requirement for sunscreen products in Australia, Europe or the USA. UV-filter photodegradants have in addition been shown to be toxic, highlighting the importance of their separation from the parent UV-filters. An HPLC method was developed and validated to quantitatively determine a combination of these UV-filters in the presence of their photodegradants. Reverse-phase chromatography was employed, using a C18 column and an isocratic mobile phase consisting of methanol/water/acetic acid (89/10/1 v/v). Validation according to the ICH guidelines for linearity, accuracy, precision, sensitivity, specificity and robustness was confirmed. The developed and validated method was then successfully applied to the determination of BMDM and OC in an aqueous cream base, typically used in sunscreens, after photostability testing, according to the ICH Guideline Q1B. In addition, the diketo-enol ratio of BMDM in methanol-d ₄ was determined by NMR and the two major photodegradants were identified by FTMS and LC–MS.     

Method development and inter-laboratory comparison about the determination of titanium from titanium dioxide nanoparticles in tissues by inductively coupled plasma mass spectrometry

Nanosized titanium dioxide (TiO₂) is one of the most interesting and valuable nanomaterials for the construction industry but also in health care applications, food, and consumer goods, e.g., cosmetics. Therefore, the properties associated with this material are described in detail. Despite its widespread use, the analytical determination and characterization of nanosized metal oxides is not as straightforward as the comparatively easy-to-detect metallic nanoparticles (e.g., silver or gold). This study presents the method development and the results of the determination of tissue titanium (Ti) levels after treatment of rats with the nanosized TiO₂. Total Ti levels were chosen to evaluate the presence and distribution of TiO₂ nanoparticles. A procedure consisting of incubation with a mixture of nitric acid (HNO₃) and hydrofluoric acid (HF), and heating was developed to digest tissues and TiO₂ nanomaterials in order to determine the total Ti content by inductively coupled plasma mass spectrometry (ICPMS). For the inter-laboratory comparison, altogether four laboratories analyzed the same samples upon digestion using the available ICPMS equipment. A major premise for any toxicokinetic study is the possibility to detect the chemical under investigation in biological samples (tissues). So, the study has to be performed with a dose high enough to allow for subsequent tissue level measurement of the chemical under investigation. On the other hand, dose of the chemical applied should not induce over toxicity in the animal as this may affect its absorption, distribution, metabolism, and excretion. To determine a non-toxic TiO₂ dosage, an acute toxicity study in rats was performed, and the organs obtained were evaluated for the presence of Ti by ICPMS. Despite the differences in methodology and independent of the sample preparation and the ICPMS equipment used, the results obtained for samples with Ti concentrations >4 μg Ti/g tissue agreed well.

SrIr9In18 – A Structurally Complex Intermetallic Compound with Sr@Ir4In12, Ir@In8 and Ir@In9 Building Units

Single crystals of SrIr₉In₁₈ were obtained by induction melting of the elements in a glassy carbon crucible followed by annealing at 1070 K. SrIr₉In₁₈ was structurally characterized by X-ray powder and single crystal diffraction: P4 m2, a = 811.21(5), c = 854.49(5) pm, wR₂ = 0.0511, 1223 F² values, and 46 variables. The structure is of a new type. The basic building units are Ir@In₈ (distorted square-prismatic, square anti-prismatic and bicapped trigonal prismatic coordination) and Ir@In₉ (distorted trigonal prismatic coordination) polyhedra, which condense to a three-dimensional network, which leaves large cavities for the strontium cations, which are coordinated to four iridium and twelve indium atoms. The [Ir₉In₁₈]^2– polyanionic network is stabilized through Ir–In (267–290 pm) and In–In (302–354 pm) bonding.     

SrIrIn6 – An Intergrowth of SrIrIn4 with Indium Slabs

The indium-rich intermetallic compound SrIrIn₆ was synthesized from the elements in a sealed tantalum ampoule at 1173 K, followed by slow cooling for crystal growth. SrIrIn₆ crystallizes with a new structure type which was characterized by X-ray powder and single crystal diffraction: Pmma, a = 852.34(2), b = 434.54(5), c = 1059.18(6) pm, wR₂ = 0.0178, 884 F² values, and 32 variables. The SrIrIn₆ structure shows two basic building units: (i) Ir@In₉ tricapped trigonal prisms (261–292 pm Ir–In) and (ii) distorted bcc In@In₈ cubes (301 to 329 pm In–In). The strontium cations fill cages within the complex three-dimensional [IrIn₆] network and have coordination number 13 (Sr@In₁₃) in form of a tricapped pentagonal prism. The SrIrIn₆ structure can be described as a simple intergrowth variant of SrIrIn₄ (LaCoAl₄ type) with indium slabs. The crystal chemical similarities with the structures of SrIrIn₄, SrIr₂In₈ and Eu₃Ir₂In₁₅ are discussed.     

Photofield emission spectroscopy and surface density of states

A novel procedure for the investigation of optical excitations on the metal surface by the photofield emission method is reviewed. A separation procedure of thermocurrent, accompanying the measured photocurrent, induced by the chopped light beam, is described. A differentiation of the true photocurrent curve allows one to obtain an energy distribution of photoelectrons. For the (0 0 0 1) face of Ti, it exhibits very small and densely spaced maxima, confirmed by theory as surface resonances. The dependence of the density on the thickness of the Ti crystal, grown by evaporation of Ti on the W field emitter surface, was verified experimentally. The possibility of observing surface resonances on a microcrystal of a homogeneous field emitter is discussed.     

Unusual thermal diffusion in polymer solutions

Thermal diffusion forced Rayleigh scattering results on thermal diffusion of poly(ethylene oxide) (PEO) in ethanol/water mixtures are presented. In water-rich solvent mixtures, PEO is found to migrate towards regions of lower temperature. This is typical for polymer solutions and corresponds to a positive Soret coefficient of PEO. In solvent mixtures with low water content, however, the polymer is found to migrate towards higher temperatures, corresponding to a negative Soret coefficient of PEO in ethanol-rich solutions. To our knowledge, this is the first observed sign change of the Soret coefficient of a polymer in solution. We also present a simple lattice model for the polymer solvent system and calculate Soret coefficients with statistical mechanics methods. The calculated values agree qualitatively with the experimental results.     

Influence of the stirring speed and CaCl2 concentration on the nano‐object morphologies obtained via RAFT‐mediated aqueous emulsion polymerization in the presence of a water‐soluble macroRAFT agent

Aqueous emulsion polymerizations of styrene were performed in the presence of a macromolecular reversible addition‐fragmentation chain transfer (RAFT) agent (macroRAFT) composed of acrylic acid (AA) and poly(ethylene oxide) methyl ether acrylate (PEOA), end‐capped by a reactive dodecyl trithiocarbonate group (P(AA‐co‐PEOA)‐TTC). The influence of the stirring speed or the presence of different amounts of a divalent salt, CaCl₂, were investigated in this polymerization‐induced self‐assembly process, in which spherical and nonspherical nano‐objects were formed upon the synthesis of amphiphilic diblock copolymers in situ. It appeared that the addition of CaCl₂ led to the controlled formation of different nano‐objects such as spheres, fibers or vesicles, whereas an appropriate stirring speed was required for the formation of nanofibers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011