Untersuchungen zur chemischen Bestimmung von Threonin und Serin

Zusammenfassung Die Threonin- bzw. die Threonin und Serinbestimmung auf chemischem Wege werden hinsichtlich der beiden wichtigsten Verfahren, nämlich der Oxydation mit Bleitetraacetat und mit Perjodsäure, vergleichend überprüft. Beide Methoden arbeiten, insbesondere nach Einführung einer für die Serinoxydation vorgeschlagenen Abänderung, recht genau. Für die Untersuchung von Aminosäuregemischen oder Eiweißhydrolysaten ist aus erörterten und überprüften Gründen die Perjodat-Oxydation vorzuziehen.     

Method development for the determination of selected pesticides on tobacco by high-performance liquid chromatography-electrospray ionisation-tandem mass spectrometry

A method was developed for the quantitative determination of alachlor, benalaxyl, clomazone, diflubenzuron, dimethomorph, diphenamid, ethofumesate, metalaxyl, methoprene, metobromuron and piperonyl butoxide on tobacco. The pesticides were extracted with water and methanol from five different types of tobacco. The extracts were purified by partition on an extraction cartridge containing diatomaceous earth. The purified extracts were analysed by reversed-phase high-performance liquid chromatography connected to an atmospheric pressure ionisation–electrospray-triple quadrupole mass spectrometer operating in the positive ion mode. Two different transitions and their relative intensities were monitored for unambiguous identification. All pesticides presented overall recovery rates between 35% and 110%. The trueness is near 100% and the interday precision is below 15%. The limits of quantifications are equal or below the guidance residue levels proposed by the Agrochemical Advisory Committee of CORESTA, an association of organisations having scientific research relative to tobacco.     

β-Lactam derivatives as enzyme inhibitors: halogenated β-lactams and related compounds

Different modifications of the imine – acyl chloride reaction were used for the synthesis of 3-mono- and 3,3-dihalogenated 1,4-diaryl substituted β-lactams. Furthermore, these β-lactams were modified by halogen substitution either at the aryl at position 1 or at the aryl substituent at position 4, or at both positions. The influence of the halogen atoms on the reactivity of the β-lactam ring, visible by the carbonyl frequence in their IR spectra, was studied. A selection of compounds was tested as inhibitors of the serin protease porcine pancreatic elastase. No simple correlation between IR frequence and biological activity was found. Finally, the base induced rearrangement of N-benzyl β-lactams was used for the synthesis of 4,5-diaryl substituted pyrrolidinones. Correspondence: Hans-Hartwig Otto, Department of Pharmaceutical/Medicinal Chemistry (PMC), Institute of Pharmacy, Ernst-Moritz-Arndt-University, 17487 Greifswald, Germany.     

Transitions of tethered polymer chains: a simulation study with the bond fluctuation lattice model

A polymer chain tethered to a surface may be compact or extended, adsorbed or desorbed, depending on interactions with the surface and the surrounding solvent. This leads to a rich phase diagram with a variety of transitions. To investigate these transitions we have performed Monte Carlo simulations of a bond fluctuation model with Wang-Landau and umbrella sampling algorithms in a two-dimensional state space. The simulations' density-of-states results have been evaluated for interaction parameters spanning the range from good- to poor-solvent conditions and from repulsive to strongly attractive surfaces. In this work, we describe the simulation method and present results for the overall phase behavior and for some of the transitions. For adsorption in good solvent, we compare with Metropolis Monte Carlo data for the same model and find good agreement between the results. For the collapse transition, which occurs when the solvent quality changes from good to poor, we consider two situations corresponding to three-dimensional (hard surface) and two-dimensional (very attractive surface) chain conformations, respectively. For the hard surface, we compare tethered chains with free chains and find very similar behavior for both types of chains. For the very attractive surface, we find the two-dimensional chain collapse to be a two-step transition with the same sequence of transitions that is observed for three-dimensional chains: a coil-globule transition that changes the overall chain size is followed by a local rearrangement of chain segments.     

Controlled formation of ag nanoparticles by means of long-chain sodium polyacrylates in dilute solution

A new tool is presented to control formation of Ag nanoparticles. Small amounts of silver ions were added to dilute solutions of long-chain sodium polyacrylates (NaPA). Four NaPA samples covering a molar mass regime of 97 kD < or = Mw < or = 650 kD have been used. With amounts of added Ag(+) as low as 1-2% of the COO(-) groups of the polyanionic chains, significant changes could already be induced in the NaPA coils with 650 kD. If the NaPA concentration was kept below 0.1 g/L, the coils with 650 kD exhibited a significant coil shrinking in stable solutions. At larger NaPA concentrations, addition of Ag+ initiates an aggregation of the polyacrylate coils toward compact structures. Coil shrinking and aggregation was revealed by means of time-resolved static light scattering. If exposed to UV-radiation, small Ag particles formed within the shrunken anionic polyacrylate coils. The Ag nanoparticles were identified by means of an enhanced light scattering and a characteristic plasmon absorption band around 410 nm. No such Ag particle formation could be observed even at 5 times larger concentrations of Ag(+) and NaPA if the two smallest polyacrylate samples have been used under otherwise equal conditions. This molar mass sensitive response of NaPA to Ag(+)-addition suggests an interesting phenomenon: if the coil size of the NaPa chains, which act as Ag(+) collectors, is large enough, local Ag(+) concentration in these coil-shaped Ag(+) containers exceeds a critical value, and irradiation with UV generates Ag nanoparticles.     

Collaborative study to improve the quality control of trace element determinations in polymers. Part 1. Interlaboratory study

In order to control the quality of trace element determinations in polymer, the Standards, Measurements and Testing Programme (formerly BCR) of the European Commission has started a project of which the final aim is to certify polymer reference materials for their contents of a range of trace elements. The first part of this project consisted in an interlaboratory study which aimed at testing the feasibility of preparation of candidate polymer reference materials and to detect and remove most of the pitfalls observed in trace element determinations. This paper presents the results of this interlaboratory study carried out prior to the certification campaign. Received: 22 April 1999 / Revised: 21 June 1999 / Accepted: 21 June 1999     

Development of a capillary electrophoretic method for the analysis of low-molecular-weight amines from metal working fluid aerosols and ambient air

A method for the determination of low-molecular-weight amines from indoor and ambient air was developed using a concentration device followed by CE coupled with indirect spectrophotometric and mass spectrometric detection that enables a reliable, rapid-response and easy-to-operate method. In indirect detection method, the selected amines were separated from interfering metal ions and amino alcohols present in the samples with an imidazole-based buffer with ethanol and EDTA as modifier. By replacing imidazole with ammonium, the final buffer was applicable for MS detection for the analytes with m/z higher than 50. A novel monolithic polymer material based on poly(methacrylate-acrylate) copolymer was developed for sampling short-chain amines from the gaseous phase. The selected analysis conditions were applied to quantify the selected short-chain amines with detection limits for the whole procedure determined between 1 and 2 microg/filter when 40 L air was sampled with 1 L/min velocity. Improved linearity and precision were obtained when the raw, time-scaled electropherogram data were transformed into mobility-scale applied for the determination of the performance characteristics of the methods. The applicability of the process of data transformation into the mobility scale was demonstrated by studying the matrix effect of water-miscible metal working fluid (stable water-oil emulsion) and of ambient air as real samples. CE-indirect UV and CE-MS, combined with the possibility of rapid air sampling, can be useful for the estimation of short-term exposure of the selected biogenic amines.