Determination of physiological noble metals in human urine using liquid-liquid extraction and Zeeman electrothermal atomic absorption spectrometry

An extremely sensitive, reliable and simple procedure is described for the determination of physiological palladium, platinum and gold in human urine. The urine samples were adjusted to pH 4 (Pd, Au) or pH 5 (Pt), followed by conversion of the analytes to their pyrrolidinedithiocarbamate complexes. These complexes were separated from the matrix by liquid-liquid extraction into 4-methyl-2-pentanone resulting in a 25-fold enrichment. Determination was by electrothermal atomic absorption spectrometry (ET-AAS) using longitudinal inverse alternating current Zeeman-effect background correction. The limits of detection calculated from three standard deviations of the blank values were 20 ng l⁻¹ for Pd and Au and 70 ng l⁻¹ Pt. Within-day precision (n = 10, 5 μg l⁻¹) ranged 5.2%–7.7%. The procedure is successfully applied to determine urinary palladium, platinum and gold in nine unexposed persons. Palladium levels in urine ranged < 20–80 ng l⁻¹ (arithmetical MEAN=38.7 ng l⁻¹), while gold levels ranged < 20–130 ng l⁻¹ (36.0 ng l⁻¹). Physiological platinum levels in urine were all < 70 ng l⁻¹. The accuracy of the procedure was checked by analyzing a series of urine samples by a second independent method (magnetic sector field inductively-coupled plasma-mass spectrometry) in combination with UV photolysis.     

Ultraviolet B Wavelength Dependence for the Regulation of Two Major Matrix-Metalloproteinases and Their Inhibitor TIMP-1 in Human Dermal Fibroblasts

Abstract— The wavelength dependence for the regulation of two major matrix-metalloproteinases, interstitial collagenase (MMP-1) and stromelysin-1 (MMP-3), and their major inhibitor, tissue inhibitor of metalloproteinases (TIMP-1), was studied in human dermal fibroblasts in vitro. Monochromatic irradiation at 302, 307, 312 and 317 nm with intensities ranging from 20 to 300 J/m² increased MMP-1 and MMP-3 mRNA steady-state levels and the secretion of the corresponding proteins up to 4.4-fold, whereas almost no increase was observed at wavelengths <290 nm. In contrast, the synthesis of TIMP-1 increased only marginally. This unbalance may contribute to the severe connective tissue damage related to photoaging of the skin. The wavelengths responsible for MMP-1 and MMP-3 induction reported here are distinct from the absorption spectrum of DNA and are different from results previously reported in the literature. Importantly, they overlap with wavelengths whose intensity is predicted to increase on the earth's surface upon ozone depletion. Intensities and particular wavelengths used in our studies in vitro can be absorbed readily by fibroblasts within the skin in vivo and, thus, are relevant for risk assessment and development of protective agents.     

Engyodontochones,Antibiotic Polyketides from the Marine Fungus Engyodontium album Strain LF069

Six new ( 2 , 4 – 8 ) and two known polyketides with a basic structure of an anthraquinone‐xanthone were isolated from mycelia and culture broth of the fungus Engyodontium album strain LF069. The structures and relative configurations of these compounds were established by spectroscopic means, and their absolute configurations were defined mainly by comparison of quantum chemical TDDFT calculated and experimental ECD spectra. Compounds 2 and 4 – 8 were given the trivial names engyodontochone A ( 2 ) and B–F ( 4 – 8 ). Compounds 5 – 8 represent the first example of a 23,28 seco‐beticolin carbon skeleton. The relative and absolute configurations of two known substances JBIR‐97/98 ( 1 ) and JBIR‐99 ( 3 ) were determined for the first time. All isolated compounds were subjected to bioactivity assays. Compounds 1 – 4 exhibited inhibitory activity against methicillin‐resistant Staphylococcus aureus (MRSA) that was 10‐fold stronger than chloramphenicol.     

HPLC Method for the Simultaneous Determination of the UV-Filters Butyl Methoxy Dibenzoylmethane and Octocrylene in the Presence of Their Photodegradants

Butyl methoxy dibenzoylmethane (BMDM) and octocrylene (OC), common UV-filters in sunscreen products are often used in combination. Together they provide broad spectrum photoprotection from exposure to both UVA- and UVB-light. These UV-filters may, however, undergo photodegradation and generate photodegradants, resulting in a potential loss of photoprotection. It is thus a concern that the photostability testing as described by the ICH Guideline Q1B is not a requirement for sunscreen products in Australia, Europe or the USA. UV-filter photodegradants have in addition been shown to be toxic, highlighting the importance of their separation from the parent UV-filters. An HPLC method was developed and validated to quantitatively determine a combination of these UV-filters in the presence of their photodegradants. Reverse-phase chromatography was employed, using a C18 column and an isocratic mobile phase consisting of methanol/water/acetic acid (89/10/1 v/v). Validation according to the ICH guidelines for linearity, accuracy, precision, sensitivity, specificity and robustness was confirmed. The developed and validated method was then successfully applied to the determination of BMDM and OC in an aqueous cream base, typically used in sunscreens, after photostability testing, according to the ICH Guideline Q1B. In addition, the diketo-enol ratio of BMDM in methanol-d ₄ was determined by NMR and the two major photodegradants were identified by FTMS and LC–MS.

     

HPLC Method for the Simultaneous Determination of the UV-Filters Butyl Methoxy Dibenzoylmethane and Octocrylene in the Presence of Their Photodegradants

Butyl methoxy dibenzoylmethane (BMDM) and octocrylene (OC), common UV-filters in sunscreen products are often used in combination. Together they provide broad spectrum photoprotection from exposure to both UVA- and UVB-light. These UV-filters may, however, undergo photodegradation and generate photodegradants, resulting in a potential loss of photoprotection. It is thus a concern that the photostability testing as described by the ICH Guideline Q1B is not a requirement for sunscreen products in Australia, Europe or the USA. UV-filter photodegradants have in addition been shown to be toxic, highlighting the importance of their separation from the parent UV-filters. An HPLC method was developed and validated to quantitatively determine a combination of these UV-filters in the presence of their photodegradants. Reverse-phase chromatography was employed, using a C18 column and an isocratic mobile phase consisting of methanol/water/acetic acid (89/10/1 v/v). Validation according to the ICH guidelines for linearity, accuracy, precision, sensitivity, specificity and robustness was confirmed. The developed and validated method was then successfully applied to the determination of BMDM and OC in an aqueous cream base, typically used in sunscreens, after photostability testing, according to the ICH Guideline Q1B. In addition, the diketo-enol ratio of BMDM in methanol-d ₄ was determined by NMR and the two major photodegradants were identified by FTMS and LC–MS.     

Source Apportionment for the Zinc—Containing Component of Air Particulate Matter using Automated Electron Probe Micro Analysis of Individual Particles

Abstract

A methodology is described for the apportionment of zinc-containing particulate matter sampled in the vicinity of a zinc smelter to their corresponding sources in the factory. Bulk samples of particulate matter from six potential emission sources were analysed by automated electron probe microanalysis (EPMA) in order to characterize the individual particles. Based on a data set of relative peak intensities and with the aid of a binary clustering method, the most important particle classes were identified. They were used as a basis for the development of a set of disjunct identification rules (decision rules), which were able to describe the classes in a unique manner. Applying these rules upon ambient particulate data enabled the estimation of relative contributions of different types of zinc-containing particles. Evidence was found that a large number of particles was modified by a soil component or by gas phase reactions.     

Method development and inter-laboratory comparison about the determination of titanium from titanium dioxide nanoparticles in tissues by inductively coupled plasma mass spectrometry

Nanosized titanium dioxide (TiO₂) is one of the most interesting and valuable nanomaterials for the construction industry but also in health care applications, food, and consumer goods, e.g., cosmetics. Therefore, the properties associated with this material are described in detail. Despite its widespread use, the analytical determination and characterization of nanosized metal oxides is not as straightforward as the comparatively easy-to-detect metallic nanoparticles (e.g., silver or gold). This study presents the method development and the results of the determination of tissue titanium (Ti) levels after treatment of rats with the nanosized TiO₂. Total Ti levels were chosen to evaluate the presence and distribution of TiO₂ nanoparticles. A procedure consisting of incubation with a mixture of nitric acid (HNO₃) and hydrofluoric acid (HF), and heating was developed to digest tissues and TiO₂ nanomaterials in order to determine the total Ti content by inductively coupled plasma mass spectrometry (ICPMS). For the inter-laboratory comparison, altogether four laboratories analyzed the same samples upon digestion using the available ICPMS equipment. A major premise for any toxicokinetic study is the possibility to detect the chemical under investigation in biological samples (tissues). So, the study has to be performed with a dose high enough to allow for subsequent tissue level measurement of the chemical under investigation. On the other hand, dose of the chemical applied should not induce over toxicity in the animal as this may affect its absorption, distribution, metabolism, and excretion. To determine a non-toxic TiO₂ dosage, an acute toxicity study in rats was performed, and the organs obtained were evaluated for the presence of Ti by ICPMS. Despite the differences in methodology and independent of the sample preparation and the ICPMS equipment used, the results obtained for samples with Ti concentrations >4 μg Ti/g tissue agreed well.

SrIr9In18 – A Structurally Complex Intermetallic Compound with Sr@Ir4In12, Ir@In8 and Ir@In9 Building Units

Single crystals of SrIr₉In₁₈ were obtained by induction melting of the elements in a glassy carbon crucible followed by annealing at 1070 K. SrIr₉In₁₈ was structurally characterized by X-ray powder and single crystal diffraction: P4 m2, a = 811.21(5), c = 854.49(5) pm, wR₂ = 0.0511, 1223 F² values, and 46 variables. The structure is of a new type. The basic building units are Ir@In₈ (distorted square-prismatic, square anti-prismatic and bicapped trigonal prismatic coordination) and Ir@In₉ (distorted trigonal prismatic coordination) polyhedra, which condense to a three-dimensional network, which leaves large cavities for the strontium cations, which are coordinated to four iridium and twelve indium atoms. The [Ir₉In₁₈]^2– polyanionic network is stabilized through Ir–In (267–290 pm) and In–In (302–354 pm) bonding.     

SrIrIn6 – An Intergrowth of SrIrIn4 with Indium Slabs

The indium-rich intermetallic compound SrIrIn₆ was synthesized from the elements in a sealed tantalum ampoule at 1173 K, followed by slow cooling for crystal growth. SrIrIn₆ crystallizes with a new structure type which was characterized by X-ray powder and single crystal diffraction: Pmma, a = 852.34(2), b = 434.54(5), c = 1059.18(6) pm, wR₂ = 0.0178, 884 F² values, and 32 variables. The SrIrIn₆ structure shows two basic building units: (i) Ir@In₉ tricapped trigonal prisms (261–292 pm Ir–In) and (ii) distorted bcc In@In₈ cubes (301 to 329 pm In–In). The strontium cations fill cages within the complex three-dimensional [IrIn₆] network and have coordination number 13 (Sr@In₁₃) in form of a tricapped pentagonal prism. The SrIrIn₆ structure can be described as a simple intergrowth variant of SrIrIn₄ (LaCoAl₄ type) with indium slabs. The crystal chemical similarities with the structures of SrIrIn₄, SrIr₂In₈ and Eu₃Ir₂In₁₅ are discussed.