A two-photon excited luminescence of water-soluble rhodamine-platinum(II) complex: fluorescent probe specific for Hg2+ detection in live cell

The first example of cyclometalated platinum(II)-containing rhodamine probe (1) with two-photon induced luminescent properties was synthesized and investigated for mercury detection. A highly selective color change of 1, from light yellow to pink, is observed only in the presence of Hg²⁺ due to the formation of 1,3,4-oxadiazole ring in 2. This selectivity of Hg²⁺ with color changes can be observed easily by the naked-eye. Meanwhile, a remarkable turn-on and selective 20-fold fluorescent enhancement of 1 upon binding with Hg²⁺ over the other tested metal ions was observed. The water-soluble probe 1 was successfully applied in the visualizing of the site of Hg²⁺ accumulation as well as estimating of trace amounts of mercury ions in live HeLa cells by two-photon microscopy.     

Evaluation of a new electrolytic cold vapor generation system for mercury determination by AFS

In this study we firstly report a new electrolytic cold vapor generation system for mercury determination on Pt/Ti cathode in the presence of organic acid catholyte. Comparing with the traditional inorganic acid, formic acid increased the signal intensity of Hg vapor from electrolytic generation on Pt cathode and reduced the impact of cathode erosion on the stability of signal intensity. Moreover, formic acid has better interference tolerance. The introduction location for carrier gas is probably the most important factor that influences the signal intensity of Hg from electrolytic vapor generation. The effects of the electrolytic conditions and interference ions on the ECVG have been studied. Under the optimized conditions, the detection limit (3σ) of Hg (II) in aqueous solutions is 1.4 ng L⁻¹; a relative standard deviation of 2.3% for 1 μg L⁻¹ Hg was obtained. The accuracy of this method was verified by the determination of mercury in the certified reference materials. This system has been applied satisfactorily to the determination of Hg in Traditional Chinese Medicines samples.     

Self-assembled E(2)L(3) cryptands (E = P, As, Sb, Bi): transmetalation, homo- and heterometallic assemblies, and conformational isomerism

A series of Group 15-containing homometallic (E(2)L(3), E = P, As, Sb, Bi) and heterometallic (AsSbL(3), AsBiL(3), PSbL(3)) supramolecular cryptands were prepared by the self-assembly of pnictogen halides with dithiolate ligand or by direct transmetalation from a heavier congener. Structural characterization by single crystal X-ray diffraction shows that the E-S bond distances and S-E-S bond angles are significantly affected by the identity of the pnictogen. (1)H NMR spectroscopy reveals that the homometallic cryptands are dynamic in solution: surprisingly one ligand "flips", perturbing the C(3) symmetry of the complex and giving a new asymmetric conformer. Density functional theory calculations were carried out on both the symmetric and the asymmetric conformations of the cryptands, and the energies were compared to those observed by NMR spectroscopy. It was found that the relative stability of the asymmetric cryptand to its symmetric conformer increases with increasing size of the Group 15 element. Finally, it is reported that if two metals are present during the self-assembly process, heterometallic cryptands form. These supramolecular cryptands are reminiscent of their organic analogues, but result from a self-assembly process rather than a stepwise synthesis. Surprisingly, they possess conformational isomerism and exhibit dynamic transmetalation in their reactivity which provides access to otherwise unattainable assemblies.     

Nonenzymatic Electrochemical Glucose Sensor Based on Pt Nanoparticles/Mesoporous Carbon Matrix

A nonenzymatic amperometric sensor for sensitive and selective detection of glucose has been constructed by using highly dispersed Pt nanoparticles supported onto mesoporous carbons (MCs). The Pt nanoparticles/mesoporous carbons (Pt/MCs) composites modified electrode displayed high electrocatalytic activity towards the oxidation of glucose. At an applied potential of 0.1 V, the Pt/MCs electrode has a linear dependence (R=0.996) in the glucose concentration up to 7.5 mM with a sensitivity of 8.52 mA M^?1 cm^?2. The Pt/MCs electrode has also shown highly resistant toward poisoning by chloride ions and without interference from the oxidation of common interfering species.     

A Comparative Study of Electrochemical Reduction of 4‐Nitrophenyl Covalently Grafted on Gold and Carbon

4‐Nitrophenyl layers were grafted on gold and glassy carbon surfaces by electrochemical reductive adsorption of the corresponding diazonium salt. Electrochemical conversion efficiencies of 4‐nitrophenyl moieties to 4‐aminophenyl moieties on gold versus on glassy carbon in a protic medium were investigated using X‐ray photoelectron spectroscopy (XPS). In total contrast to all previous comparative studies showing greater electrochemical reactivity of aryl diazonium salt‐derived layers on gold than on glassy carbon, a much lower rate of conversion to 4‐aminophenyl was observed on gold than on glassy carbon by both cyclic voltammetry (CV) and chronoamperometry (CA) methods. The lower electron transfer rate during conversion observed on gold versus glassy carbon was proposed to be due to a mechanism related to the molecular structure rearrangement of 4‐nitrophenyl during the process on glassy carbon. However, whilst complete conversion of 4‐nitrophenyl to 4‐aminophenyl on gold by chronoamperometry was achieved, on glassy carbon complete reduction could not be achieved under the same conditions.     

New Guaipyridine Sesquiterpene Alkaloids from Artemisia rupestris L.

Three new guaipyridine sesquiterpene alkaloids, rupestine A, B, C ( 1 – 3 , resp.), and the new nor‐sesquiterpne alkaloid rupestine D ( 4 ) were obtained from the flowers of Artemisia rupestris L. Their structures were elucidated on the basis of sepectroscopic data and by comparison with those of the related compounds reported in the literature. In addition, the absolute configurations of 2 and 4 were determined by single‐crystal X‐ray diffraction analyses.     

Size dependent active effect of CdTe quantum dots on pyrogallol-H2O2 chemiluminescence system for chromium(III) detection

Water-soluble CdTe quantum-dots (QDs) of different sizes and capped with mercaptosuccinic acid were prepared by the microwave irradiation method. The QDs can significantly enhance the chemiluminescence (CL) of the pyrogallol-H₂O₂ system. Those with a diameter of 3.8 nm produce the most intense CL. UV-vis, photoluminescence, and CL spectra were acquired in order to explore the effect. The results showed that the chromium(III) ion in the concentration range from 20 pM to 30 µM enhances CL, and this is exploited for its trace determination.The limit of detection (3σ) is 6 pM, with a relative standard deviation (n?=?11) of 1.7%. A continuous flow injection CL method was developed and applied to the determination of chromium(III) in tap water and lake water samples with satisfactory results.     

A Proof for Substitution of Endogenous Iron (II) in Lipoxygenase by Exogenous Cu2+

Soybean lipoxygenase (LOX) contains endogenous iron (II) at the active site, which is important for the enzyme activity. The activity of LOX can be accelerated by some exogenous metal ions including Cu²⁺. However, the mechanism of the activity improvement caused by exogenous metal ions remains unclear, not only for LOX but for most other metalloenzymes. Meanwhile, the possibility that exogenous metal ions can displace endogenous iron (II) is still in discussion for a lack of a direct and quantitative proof. In this paper, a quantitative proof of replacing iron (II) inside LOX by exogenous Cu²⁺ was provided, simply using UV-Vis spectrometry with two indicators p-carboxylantipyrylazo and 9-(4-carboxyphenyl)-2,3,7-trihydroxyl-6-fluorine. A 0.56 μM free iron (II) was observed in the bulk solution after incubating 9.45 μM Cu²⁺ with 16.10 μM LOX at 20°C for 5 min, which is in coincidence with the decrement of Cu²⁺ in the bulk solution (0.53 μM), implying that iron (II) was replaced by Cu²⁺.