Coupling Microdroplet Microreactors with Mass Spectrometry: Reading the Contents of Single Droplets Online

Fully integrated : Mass spectrometry has been integrated into a detection scheme for microdroplets that are created within microfluidic channels (see picture, scale bar 200 μm). This technique allows droplets to be identified based on the compounds they contain, and combines fluorescence screening with MS analysis. These experiments indicate how similar approaches can be applied to the ambitious goals of on‐chip protein evolution and chemical synthesis.

     

Reaction mechanisms and kinetics for the oxidations of dimethyl sulfide, dimethyl disulfide, and methyl mercaptan by the nitrate radical

This study examines the initial oxidation routes of the three major reduced sulfur compounds (CH(3)SH, CH(3)SCH(3), and CH(3)SSCH(3)) by the nitrate radical using density functional and ab initio methods. Stationary points along each reaction pathway are examined using different levels of theory and basis sets to ensure the convergence of the results. Kinetics calculations follow on the determined reaction pathways to obtain the rate constants. This study shows that sulfur compounds exhibit a general trend of hydrogen abstraction following the formation of an initial sulfur-nitrate complex. The results are in agreement with experimental work on CH(3)SCH(3) and CH(3)SH, while refuting a proposal of several previous studies that oxygen addition is the dominant oxidation pathway in the case of CH(3)SSCH(3). The rate constants obtained from kinetics calculations are consistent with experimental findings and exhibit negative temperature dependence. Overall, this study confirms the importance of nitrate in the oxidation of reduced sulfur compounds in the atmosphere.     

An interface comprising molecular wires and poly(ethylene glycol) spacer units self-assembled on carbon electrodes for studies of protein electrochemistry

The characterization and application of a modified electrode interface for protein electrochemistry is reported. This generic interface is composed of a mixed monolayer of oligo(phenylethynylene) molecular wires (MWs) and poly(ethylene glycol) (PEG) deposited on glassy carbon electrodes by reductive adsorption of the respective aryl diazonium salts. Electrochemistry and scanning electron microscopy demonstrate that the PEG component exhibits a distinct decrease in nonspecific adsorption of blood serum and the proteins bovine serum albumin (BSA) and horseradish peroxidase (HRP) relative to a bare glassy carbon electrode. The ability of the MWs to facilitate efficient electron transfer through the PEG layer to the underlying electrode was demonstrated by covalently attaching ferrocenemethylamine to the end of the MWs. The calculated rate constant for this system was 229 +/- 30 s(-1). Covalent attachment of HRP to the MWs allowed direct electron transfer to the redox protein with almost ideal electrochemistry, indicating a specific interaction between the MW and HRP, with a rate constant of 13.4 +/- 2.3 s(-1). This rate constant is more rapid than previously reported for HRP shown to still be catalytically active. Retained catalytic activity of HRP was demonstrated by the enzyme responding to the addition of hydrogen peroxide. Similarly, by attaching myoglobin to the end of the MWs, a rate constant for this protein of 2 s(-1) was measured. The rigidity of the MWs, as well as it being longer than the PEG diluent, means this generic interface can be employed to investigate the electrochemistry of a wide range of redox proteins.     

Sensitivity‐Enhanced 13C‐NMR Spectroscopy for Monitoring Multisite Phosphorylation at Physiological Temperature and pH

Abundant phosphorylation events control the activity of nuclear proteins involved in gene regulation and DNA repair. These occur mostly on disordered regions of proteins, which often contain multiple phosphosites. Comprehensive and quantitative monitoring of phosphorylation reactions is theoretically achievable at a residue‐specific level using ¹H‐¹⁵N NMR spectroscopy, but is often limited by low signal‐to‐noise at pH>7 and T>293 K. We have developed an improved ¹³Cα‐¹³CO correlation NMR experiment that works equally at any pH or temperature, that is, also under conditions at which kinases are active. This allows us to obtain atomic‐resolution information in physiological conditions down to 25 μm . We demonstrate the potential of this approach by monitoring phosphorylation reactions, in the presence of purified kinases or in cell extracts, on a range of previously problematic targets, namely Mdm2, BRCA2, and Oct4.     

Simple and Efficient Purification Protocol of 9-(Trifluoroacetyl)anthracene from Anthracene

A protocol has been developed to purify 9-(trifluoroacetyl)anthracene from anthracene, the major impurity associated in its synthesis. The protocol utilizes a chemoselective thermal Diels–Alder reaction, employing maleic anhydride as the dienophile. The resulting Diels–Alder adduct can then be removed by extractive workup followed by recrystallization to give 9-(trifluoroacetyl)anthracene with ≥99% chemical purity.     

Amine-functionalised SBA-15 of tailored pore size for heavy metal adsorption

This study examines the synthesis of SBA-15 with tailored pore sizes through controlled thermal treatment for the adsorption of Pb and Cd ions. The aim is to produce a material that can adsorb heavy metals at both high and low concentrations. The materials were characterised by means of N(2) physisorption, powder X-ray diffraction (PXRD), diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), microanalysis and transmission electron microscopy (TEM). The surface areas ranged from 410 to 871 m(2)g(-1), and pore diameter was increased from 5.9 to 10.8 nm. This method allows for maximum adsorption of metal ions at very low concentrations. Metal ion adsorption was determined using an Atomic Absorption Spectrophotometer. The effects of pH were found to play a major role in the precipitation and, therefore, adsorption of metal ions. This method proved to be efficient at adsorbing large quantities of both metals (39 and 41 mg g(-1) for Pb and Cd, respectively).     

Polymersomes Prepared from Thermoresponsive Fluorescent Protein–Polymer Bioconjugates: Capture of and Report on Drug and Protein Payloads

Polymersomes provide a good platform for targeted drug delivery and the creation of complex (bio)catalytically active systems for research in synthetic biology. To realize these applications requires both spatial control over the encapsulation components in these polymersomes and a means to report where the components are in the polymersomes. To address these twin challenges, we synthesized the protein–polymer bioconjugate PNIPAM‐b‐amilFP497 composed of thermoresponsive poly(N‐isopropylacrylamide) (PNIPAM) and a green‐fluorescent protein variant (amilFP497). Above 37 °C, this bioconjugate forms polymersomes that can (co‐)encapsulate the fluorescent drug doxorubicin and the fluorescent light‐harvesting protein phycoerythrin 545 (PE545). Using fluorescence lifetime imaging microscopy and Förster resonance energy transfer (FLIM‐FRET), we can distinguish the co‐encapsulated PE545 protein inside the polymersome membrane while doxorubicin is found both in the polymersome core and membrane.     

A new route to achiral and chiral 1,2-bis(phosphino)ethanes, 1-arsino-2-phosphinoethanes, and 1,3-bis(phosphino)propanes and the molecular structure and catalytic activity of some rhodium(I) complexes derived thereof

A series of unsymmetrical 1,2-bis(phosphino)ethanes R(2)PCH(2)CH(2)PR'(2) and 1-arsino-2-phosphinoethanes R(2)AsCH(2)CH(2)PR'(2) mainly with bulky substituents R and R' were prepared from the cyclic sulfate by stepwise cleavage of the carbon-oxygen bonds by LiPR(2) and LiPR'(2) or LiAsR(2) and LiPR'(2), respectively. Analogously, racemic mixtures of R(2)PCH(2)CH(Me)PPh(2)(R =iPr, Cy ) as well as the enantiomers (R)-, (R)- and (R)-tBu(2)PCH(2)CH(Me)PPh(2)(R)- were obtained from the corresponding unsymmetrical cyclic sulfates and (S)-. On a similar route, the racemates of the 1,3-bis(phosphino)propanes R(2)PCH(2)CH(2)CH(Me)PPh(2)(R =iPr, tBu ), optically pure (R)- and (S,S)-iPr(2)PCH(Me)CH(2)CH(Me)PPh(2)(S,S)- were prepared. The reaction of [[RhCl([small eta](4)-C(8)H(12))](2)] with chelating ligands L-L, where L-L is R(2)PCH(2)P(men)(2)(R =iPr, Ph; men =(1S,2R,5S)-menthyl), Cy(2)AsCH(2)P(men)(2), or (R)-, (R)-, (R)-, (R)- and (S,S)-, in the presence of AgPF(6), gave the complexes [Rh(eta(4)-C(8)H(12))(L-L)]PF(6) which were used as pre-catalysts in the hydrogenation of the methyl ester of alpha-acetamidocinnamic acid (ACM). Depending on L-L, the solvent, the temperature and the pressure of H(2), optical yields of up to 69% ee were achieved. For two of the rhodium complexes, and, the molecular structures were determined by X-ray crystallography.     

Generation of 3-pyridyl biaryl systems via palladium-catalyzed Suzuki cross-couplings of aryl halides with 3-pyridylboroxin

The synthesis of 3-pyridyl biaryl systems can be readily achieved by means of palladium-catalyzed Suzuki cross-coupling reactions between aryl halides and 3-pyridylboroxin. A series of cross-couplings were conducted in order to investigate the scope and limitations of this protocol.     

Ring-borylated 15-electron and 17-electron ansa-chromocene complexes, their physical properties and molecular structures

A detailed study of the thermal decomposition of the zwitterionic, ring-borylated ansa-chromocene hydrido carbonyl complex [Cr(CO)H{Me(4)C(2)(C(5)H(4))[C(5)H(3)B(C(6)F(5))(3)]}] (2) is described. This complex is formed in the reaction between [Cr(CO){Me(4)C(2)(C(5)H(4))(2)}] (1) and B(C(6)F(5))(3) in toluene at -78 degrees C. Above -25 degrees C, 2 decomposes to a 50:50 mixture of the low-spin, 17e Cr(III) complexes [Cr(CO){Me(4)C(2)(C(5)H(4))[C(5)H(3)B(C(6)F(5))(3)]}] (3b) and [Cr(CO){Me(4)C(2)(C(5)H(4))(2)}][HB(C(6)F(5))(3)] (4). Carbon monoxide elimination from 3 b generates high-spin, 15 e [Cr{Me(4)C(2)(C(5)H(4))[C(5)H(3)B(C(6)F(5))(3)]}] (3a), which coordinates two other electron-donating ligands, such as xylyl isocyanide, PMe3, and PPh(2)Me to form the low-spin, 17 e electron complexes 3c, 3d, and 3e, respectively. High-spin, 15 e [Cr{Me(4)C(2)(C(5)H(4))(2)}][HB(C(6)F(5))(3)] (5) is generated by heating 3 b in toluene at 100 degrees C and periodically removing the evolved CO. Efforts to isolate more than a few X-ray quality crystals of 5 were thwarted by its tendency to form an insoluble precipitate (6) with the same molecular formula. Heating the solution of 5 at 120 degrees C results in its partial conversion (ca. 28 %) to 3a, thereby allowing the formation of 3a in yields as high as 74 % from the reaction between 1 and B(C(6)F(5))(3). The X-ray crystal structures of 3 b-e and 5 are described. Cyclic voltammetry measurements on 3 a-e reveal a dramatic reduction in the redox potentials of the complexes relative to their non-borylated analogues. DFT calculations show that this is due primarily to electrostatic stabilization of the oxidized species by the negatively charged borylate group. EPR and 19F NMR spectroscopy allow 3a to be distinguished from its Lewis base adducts 3 b-e and reveal the relative affinities of different Lewis bases for the chromium.