Inherent instabilities of some W5Si3-type binary phases with large electropositive metal atoms: Six examples in the Ba-Pb, Ca-Sn-Mg,Cu,Zn, and La-Ga-Al,Zn systems

A particular pathology of certain W₅Si₃-type A₅B₃ structures (I4/mcm) appears to arise because of unduly close approaches of the A1-type atoms on the cell faces at , 0, () that occur with the larger and more electropositive A and/or in the presence of smaller B atoms. A structure refinement of binary Ba_4.81Pb₃ indicates such a marginal stability in that the Ba atoms in the facial Ba_0.81 chains exhibit an extreme displacement ellipsoid along . Although Ca₅Sn₃ and La₅Ga₃ binaries are unknown in this structure type, five stable ternary derivatives of these have been synthesized via substitution reactions and characterized by single crystal X-ray diffraction means: Ca₄Sn_3.223(4)Mg_0.777, Ca₄Sn₃Cu_1.30(4), Ca_4.66(6)Sn₃Zn_0.704(4), La_4.81(1)Ga_1.38(2)Al_1.62, and La_4.762(5)Ga_1.5(1)Zn_1.5. Only the Ca-Sn-Zn phase exhibits lower symmetry, P4/mbm. The problematic A1 sites exhibit diverse changes in these, whereas the surrounding B2 tetrahedra are largely unaltered. The Ca-Sn results are, respectively: direct Mg/Sn substitution at the Ca1 site; mixed fractional distribution of the smaller Cu at two sites around the A1 position with an unresolved disorder; a pair of apparently independent modes, fractional Ca in the normal position and fractional Zn rectangles thereabout. The two La-Sn phases contain normal Ga,Al (Ga,Zn) tetrahedral chains with pairs of fractional disordered La atoms along , 0, z. Each can be rationalized in terms of a reasonable incommensurate structure. Electronic effects may also be operable.     

Pentanuclear Ba(II) complex of a macrocyclic ligand

We report here the first pentanuclear Ba(II) complex of a new tri-aza, tri-oxa macrocycle with two carboxymethyl "arms" pending from two N atoms, H2L2. The crystal structure corresponds to the formula [Ba5(H0.375L2)4(ClO4)(CH3CH2OH)(H2O)2](ClO4)2.5 x 9.5H2O and reveals the presence of four molecules of the ligand surrounding five Ba(II) ions, giving rise to an unusual structure with the metal ions inside a spherical organic cavity.     

The Role of Intramolecular Hydrogen Bonds vs. Other Weak Interactions on the Conformation of Hyponitrous Acid and Its Mono- and Dithio-Derivatives

High level ab initio and density functional theory calculations have been carried out to investigate the relative stability of the different conformers of hyponitrous acid and its mono- and dithio-derivatives. Geometries and vibrational frequencies were obtained at the B3LYP/6-311+G(d,p) level and final energies through B3LYP/6-311++G(3df,2pd) single point calculations. The reliability of this theoretical scheme has been assessed by comparing these DFT results with those obtained at the G3 level of theory, for some suitable cases. The cis conformers of hyponitrous acid and its mono- and dithio-derivatives are systematically more stable than the trans ones because in the cis conformation a dative interaction between the nitrogen-lone pairs and the σ_NX^* antibonding orbital is significantly favored. Quite interestingly, in general, the conformers presenting an intramolecular hydrogen bond (IHB) are not the global minima of the corresponding potential energy surfaces and only for hyponitrous acid the conformer with a OH ⋅s O IHB is slightly more stable than the cis conformer without IHB. The low stability of the tautomers with IHB is closely related with another weak intramolecular interaction which involves the lone-pairs of the chalcogen atoms and the π_NN^* antibondig orbital, and which is significantly perturbed when the IHB is formed.     

Estimating the PDMS-Coated, SPME-Fibre/Water- and Fibre/Gas-Partition Coefficients of Chlorinated Ethenes by Headspace-SPME

In this work, a simple, fast and reproducible method is presented for the determination of fibre/liquid-phase and fibre/gas-phase partition coefficients of five chlorinated ethenes on a poly-(dimethylsiloxane), PDMS-coated, solid-phase microextraction fibre, by employing a headspace HS-SPME coupled with gas chromatography. The partition coefficients were estimated by a numerical method using a Level-I fugacity method coupled with parameter-estimation software. Dimensionless partition coefficients between SPME fibre and liquid as well as gas phases were obtained at temperatures of 10 °C, 25 °C and 30 °C. The partition coefficients of the fibre and the gas phase, K _fg, increase with decreasing temperature by a factor of ≈2 to 6, and they are directly proportional to the linear slope of the regression line. The same tendency is observed for the partition coefficient of the fibre and liquid phase, K _fw, in a factor ≈1.2 to 2.0. The sorption enthalpy is higher in the gas phase; therefore, the sorption onto the fibre is favoured at lower temperatures. The correlation of the log K _ow versus log K _fw and log K _oa versus log K _fg shows a linear relationship with the number of chlorine atoms in the C = C molecule. Long-term experiments resulted in sorption to Teflon surfaces and possible losses in 43 mL vials, not observed in 250 mL Boston bottles.     

The applicability of DTA and DSC techniques to the study of the kinetics of phase transition reactions

Differential thermal analysis and differential scanning calorimetry techniques have been used to study the kinetics of phase transitions. The aragonite/calcite transformation was chosen as test reaction.Marked discrepancies were observed between the DTA kinetic results and those obtained from isothermal kinetic measurements. This disagreement is associated with the difficulty of determining accurately the reaction rate of the process from a DTA curve.In contrast, in DSC measurements, where the reaction rate is given by the height of the peak from the base-line, it is possible to get a satisfactory fit of the data, and the kinetic results obtained with this technique are in good agreement with the isothermal ones.

---

Zusammenfassung Die Differentialthermoanalyse und DSC wurden zur Untersuchung der Kinetik von Phasenübergängen eingesetzt. Die Umwandlung Aragonit/Calcit wurde als Testreaktion gewählt.Bedeutende Diskrepanzen wurden zwischen den kinetischen Ergebnissen der DTA und den durch isotherme kinetische Messungen erhaltenen Ergebnissen beobachtet. Diese Abweichungen sind damit verbunden, daß es schwierig ist, die Reaktionsgeschwindigkeit des Vorgangs aus einer DTA-Kurve genau zu ermitteln.Bei DSC-Messungen,wo die Reaktionsgeschwindigkeit durch die Höhe des Peaks von der Grundlinie gegeben ist, kann eine befriedigende Anpassung der Daten erhalten werden, und die durch diese Technik erhaltenen kinetischen Ergebnisse sind in guter Übereinstimmung mit den isothermen Ergebnissen.

---

. /. , . -. , , , , , .

     

Voltammetric behavior of zaleplon and its differential pulse polarographic determination in capsules

In this work both the electrochemical behavior and the analysis of the hypnotic pyrazolopyrimidine derivative zaleplon were studied. Zaleplon in ethanol-0.1M Britton Robinson buffer solution (30-70) showed 2 irreversible, well-defined cathodic responses in the pH range of 2-12 using differential pulse polarography (DPP), tast polarography, and cyclic voltammetry. From chronocoulometric studies, it was possible to conclude that one electron was transferred in each reduction peak or wave. For analytical purposes, the DPP technique working at pH 4.5 for peak I was selected, which exhibited adequate repeatability, reproducibility, and selectivity. The recovery was 99.97 +/- 1.52%, and the detection and quantitation limits were 5.13 x 10(-7)M and 1.11 x 10(-6)M, respectively. The DPP method was applied successfully to the individual assay of capsules in order to verify the content uniformity of zaleplon. Treatment of the sample is not required because the excipients do not interfere, the method is not time consuming, and it is less expensive than column liquid chromatography.     

Gas-phase interaction of H2S with O2: A kinetic and quantum chemistry study of the potential energy surface

Quantum chemical calculations were carried out to study the interaction of hydrogen sulfide with molecular oxygen in the gas phase. The basic mechanism, the rates of reaction, and the potential energy surface were calculated. Isomers and transition states that connect the reactants with intermediates and products of reaction were identified using the G2 method and B3LYP/6-311+G(3df,2p) functional. Hydrogen abstraction to form HO2 + SH is the dominant product channel and proceeds through a loose transition state well-described at the level of calculation employed. The temperature dependence of the rate coefficient in the range 300-3000 K has been determined on the basis of the ab initio potential energy surface and with variational transition-state theory. The reaction is 169.5 kJ mol(-1) endothermic at 0 K with a rate constant given by 2.77 x 10(5) T(2.76) exp(-19 222/T) cm3 mol(-1) s(-1) and should proceed slowly under atmospheric thermal conditions, but it offers a route to the initiation of H2S combustion at relatively low temperatures.