Preconcentration of platinum group metals on modified silicagel and their determination by inductively coupled plasma atomic emission spectrometry and inductively coupled plasma mass spectrometry in airborne particulates

Modified silicagel (C18) was studied for separation and preconcentration of platinum group metals (Ru, Rh, Pd, Os, Ir and Pt) as ion associates of their chlorocomplexes with cation of onium salt N(1-carbaethoxypentadecyl)-trimethyl ammonium bromide. Sample containing HCl and the onium salt was pumped through the column. After elution with ethanol the eluate was evaporated in the presence of HCl. Resulting aqueous solutions were analysed with inductively coupled plasma atomic emission spectrometry (ICP-AES) and inductively coupled plasma mass spectrometry (ICP-MS). Recovery values of 1-20 mug Pt and Pd from 50 ml of synthetic pure solution were 100+/-3 and 100+/-1%, respectively, however, they diminished with increasing sample volume and in the presence of the real sample matrix or nitrate ions. Samples of engine soot (NIES No. 8), decomposed by low pressure oxygen high-frequency plasma, and airborne particulates from dust filters of meteorological stations, leached with HNO(3) and H(2)O(2), were analysed. A reasonable agreement was found between ICP-MS and ICP-AES results for airborne dust samples and the values comparable with those in literature were determined in NIES No. 8.     

Dexamethasone delivery to posterior segment of the eye

Due to anatomic barriers and lacrimal drainage it is difficult to obtain therapeutic drug concentrations in the posterior part of the eye after topical drug administrations. Lipophilic cyclodextrins, such as randomly methylated β-cyclodextrin (RMβCD), are known to act both as solubilizers of water-insoluble drugs in aqueous solutions and as penetration enhancers that reduce the barrier function of lipophilic membranes. The purpose of this study was to investigate the effects of RMβCD on dexamethasone delivery from aqueous eye drop solution into rabbit eyes. Dexamethasone (0.5 and 1.5% w/v) drops (50 μl) were administered to the left eye of rabbits (n = 6) and the drug levels measured in different eye tissues 2 h after administration. In aqueous humor dexamethasone levels were 1,190 ± 110 and 1,670 ± 630 ng/g (mean ± SD) after administration of the 0.5 and 1.5% dexamethasone eye drops, respectively. In the retina the levels were 33 ± 7 and 66 ± 49 ng/g, and in optic nerve 41 ± 12 and 130 ± 50 ng/g, respectively. In a previous study the dexamethasone concentration in aqueous humor after topical administration of 1.3% (w/v) dexamethasone eye drops in aqueous 2-hydroxypropyl-β-cyclodextrin (HPβCD) solution was determined to be 320 ± 230 ng/g and 66 ± 20 ng/g after administration of Maxidex^® eye drops. Both the hydrophilic HPβCD and the lipophilic RMβCD enhance topical dexamethasone delivery into the eye, but of the two, the lipophilic RMβCD results in higher dexamethasone concentrations.     

Metal chelate exchange in the organic phase-II Extraction and exchange constants of dithizonates and diethyldithiocarbamates

Dithizonates and diethyldithiocarbamates of Ag, Tl(I), Cu(II), Zn, Cd, Hg(II), Pb, Fe(II), Co(II), Ni, Pd(II), In(III), As(III), Sb(III), Bi, Se(IV) and Te(IV) have been prepared and their reactions in carbon tetrachloride have been studied spectrophotometrically. From the exchange constants determined, the extraction constants of metal diethyldithiocarbamates have been calculated. Where formation of mixed chelates has been observed, corresponding exchange constants have been determined. Finally, the influence of organic solvents (CCl(4), CHCl(3), C(6)H(6) and C(6)H(5)Cl) on the exchange reaction of zinc diethyldithiocarbamate with dithizone has been investigated.     

Analysis of R. P. Smith's and D. C. Parris-R. B. Mclellan's carbon diffusivity data

A phenomenological model is proposed to account for the variation of carbon diffusivityD(N₁) with composition in austenite. This model is based on Parris-McLellan's statement that the increase ofD(N₁) with carbon concentrationN ₁ is due to the increase in chemical driving force. The gradient of the carbon activity in Wagner's and in Zupp-Stevenson's interpretation is presumed to be the intrinsic driving force. The predictions of the model are compared with carbonD(N₁) values both with [1] and without [5] a chemical concentration gradient. TheD(0) values and the carbon-carbon interaction coefficients ₁ are calculated by the use of the least squares method from the experimental data. The application of Zupp-Stevenson's definition of the activity coefficient ₁ results in a better fit of the theory to the experimental data.     

Interdiffusion in the Co-Ni system-I concentration penetration curves and interdiffusion coefficients

The interdiffusion in the Co-Ni system has been investigated in the temperature range of 950 to 1150 °C, by means of diffusion specimens of pure Co and Ni. The concentration curvesN(x, t) obtained with the aid of an JXA-3 A JEOL electron microprobe were evaluated using the smoothing cubic spline method by means of the Boltzmann-Matano equation. The obtained interdififusion coefficient values ¯D increase with the increasing Ni concentration and satisfy the Arrhenius equation at temperaturesH 990 °C. At lower temperatures the influence of high diffusivity paths may be effective, resulting in higher ¯D values. No expressive influence of atomic (Ni₃Co) or magnetic order on the interdiffusion has been detected. The activation enthalpyH values were found almost concentration independent. A Kirkendall effect study has been carried out with positive results which are presented in Part II of this paper. A new method for the determination of diffusants concentration in the Kirkendall plane was proposed. With the use of this method and of Darken equations the intrinsic diffusion coefficients were calculated. These results are given in Part III.     

Synthese von Clathratverbindungen des Typs Cd(mea) m [Pd(CN)4] ·nG

The preparation, identification and some properties of three new clathrate compounds Cd(mea)[Pd(CN)₄] · 2C₆H₆, Cd(mea)₂[Pd(CN)₄] · C₄H₄S and Cd(mea)₂[Pd(CN)₄] · C₄H₄NH (mea = HO-CH₂-CH₂-NH₂) are described.

     

Instrumental neutron activation analysis of brewer's yeast

Instrumental neutron activation was used for the determination of 23 trace and minor elements in 4 different samples of brewer's yeast. Detection limits for these elements vary from 2 ppb to 100 ppm. The following average concentrations were found (ppm, dry weight): Al 597, Br 0.36, Cl 1473, Co 0.21, Cu 19, Fe 285, K 16 400, Mg 1355, Mn 8.4, Na 2330, Rb 19, Sb 0.053, Se 1.2, V 2.2 and Zn 80. NBS standard 1569 was also analyzed and the following concentrations (in ppm) were measured: Al 2300, Br 0.65, Ce 0.23, Cl 460, Co 0.26, Cr 2.12, Cu 11, Fe 707, Gd 7.1, Hf 0.13, K 15 500, Mg 1780, Mn 7, Na 510, Rb 16, Sb 0.075, Sc 0.18, Se 0.92, Th 3.7, Ti 38, U 0.49, V 4.1 and Zn 70.     

A method for the palladium-catalyzed allylic oxidation of olefins

Olefins are converted into allylic acetates by treatment in acetic acid with a catalytic amount of palladium bis(trifluoroacetate) and one equivalent of benzoquinone as oxidant. The reaction is selective for oxidation of a terminal methyl group of geranylacetone.     

Heterogeneous reactions of solid nickel(II) complexes. XVIII

The Stoichiometry of thermal decomposition was studied for the following compounds: Ni(NCS)₂(2-Mepy)₂ (I), (Me=methyl, py=pyridine), Ni(NCS)₂(2-Etpy)₂ (II) (Et=ethyl), Ni(NCS)₂(2-Clpy)₂ (III), Ni(NCS)₂(2-Brpy)₂ (IV), Ni(NCS)₂(2-NH₂py)₂ (V), Ni((NCS)₂(2-NH₂py)₂·3/4 (C₂H₅)₂O (VI). The release of volatile ligands 2-Rpy is a one-step process for complexes I, II, III and IV, while for V and VI it is a two-step process, Ni(NCS)₂(2-NH₂py)₁ (VII) being formed as an intermediate complex. It was found that complexes I and II are square-planar; the others exhibited pseudo-octahedral geometry. The differences in stereochemistry of the above complexes are explained by the different electronic properties of 2-Rpy.     

Aggregation and decomposition of a pseudoisocyanine dye in dispersions of layered silicates

The optical properties of reaction systems composed from a pseudoisocyanine (PIC) solution and dispersed layered silicates were studied using visible spectroscopy. Two series of reduced-charge montmorillonites were used as the silicate materials. Each series consisted of eight samples with different layer charges, which were prepared from one parent material. Observed trends were verified with another series of dioctahedral and trioctahedral smectites of different layer charges, structure, and origin. The layer charge density of the silicates significantly affected the aggregation of PIC cations. In addition to the formation of J-aggregates, dye spectral bleaching was also observed. Silicates with very low charge densities induced neither significant aggregation nor spectral bleaching of the dye. The highest levels of PIC J-aggregate formation were found in dispersions of the layered silicates with a medium surface charge. However, reversible spectral bleaching was also observed in some cases. PIC dye cations probably change their conformations during the adsorption process, due to the tension resulting from the large size of the cations and the relatively high charge density at the silicate surface. The bleached dye recovers, at least partially, with the rearrangement and redistribution of the dye cations over the time. In contrast, the presence of silicates with very high charge densities (synthetic taeniolite and fluorohectorite) led to the very fast and irreversible decomposition of the PIC. Perhaps, the tension in adsorbed dye cations, induced by the high charge density at the silicate surface, resulted in significant destabilization and a decomposition reaction of the chromophore.