Direct determination of copper and zinc in cow milk, human milk and infant formula samples using electrothermal atomization atomic absorption spectrometry

Infant formula and powdered milk samples were suspended in a medium containing 20% ethanol, 0.65% nitric acid, 6% hydrogen peroxide and 0.1% ammonium dihydrogenphosphate and directly introduced in the electrothermal atomizer. Liquid milk samples were diluted with this suspension solution. The build-up of carbonaceous residues inside the atomizer was avoided by using a combination of hydrogen peroxide and nitric acid. Fast programs were used to simplify the heating cycles. Calibration was carried out using aqueous standards and the detection limits for copper and zinc were found to be 70 and 15 pg, respectively. The metal contents of several milk samples obtained by direct introduction of the samples agree with those obtained by means of a conventional procedure based on the total dissolution of the samples. The reliability of the methods was also confirmed by analyzing three certified reference materials. The free and protein binding fractions were measured by ultrafiltration membrane permeability of the milk samples.     

Investigation of the mechanism of methane formation in the fischer-tropsch synthesis on a Co/SiO2·ZrIV catalyst

Methane is formed in the Fischer-Tropsch synthesis under real conditions both through intermediates leading to chain propagation and by hydrogenation of surface carbon. L. V. Pisarzhevskii Institute of Physical Chemistry, National Academy of Sciences of Ukraine, Prospekt Nauki 31, 252039 Kiev, Ukraine. Translated from Teoreticheskaya i éksperimental’naya Khimiya, No. 1, pp. 41–43, January–February, 1996.     

Hydrocarbons from synthesis gas over Pd supported on silica-alumina catalyst

We have studied the operational conditions which allow the synthesis gas to hydrocarbon transformation in only one step using Pd supported over an amorphous silica-alumina catalyst. The increase of temperature, pressure and time factor favors carbon monoxide conversion. Methanol synthesis reaction can be considered as the limiting step of the overall process. The product distribution is governed by the reaction medium (type and distribution of active sites and the presence of hydrogen).     

Determination of Benzo[a]pyrene in smoking-flavour agents (water-soluble liquid smoke) by second derivative constant-wavelength synchronous spectrofluorimetry

We have developed a simple, rapid, inexpensive method for the determination of benzo[a]pyrene (BP, a known carcinogen) in smoking-flavour agents (water-soluble liquid smoke; WSLS). After purification of the WSLS by a single passage through a Sep Pak C18 Plus cartridge, BP in the hexane eluate was determined by second derivative constant-wavelength synchronous spectrofluorimetry. Method precision (RSD < 6%) and recovery ( approximately 92%) were satisfactory, and the detection and quantification limits (1.05 and 2.28 mug kg(-1) respectively) indicated that the current maximum permissible concentration of BP in smoke flavourings (10 mug kg(-1)) can be monitored by this method.     

Comparison of sediment pollution in the rivers of the Hungarian Upper Tisza Region using non-destructive analytical techniques

The rivers in the Hungarian Upper Tisza Region are frequently polluted mainly due to mining activities in the catchment area. At the beginning of 2000, two major mining accidents occurred in the Romanian part of the catchment area due to the failure of a tailings dam releasing huge amounts of cyanide and heavy metals to the rivers. Surface sediment as well as water samples were collected at six sites in the years 2000–2003, from the northeast-Hungarian section of the Tisza, Szamos and Túr rivers. The sediment pollution of the rivers was compared based on measurements of bulk material and selected single particles, in order to relate the observed compositions and chemical states of metals to the possible sources and weathering of pollution. Non-destructive X-ray analytical methods were applied in order to obtain different kinds of information from the same samples or particles. In order to identify the pollution sources, their magnitude and fate, complementary analyses were carried out. Heterogeneous particulate samples were analyzed from a large geographical territory and a 4-year time period. Individual particles were analyzed only from the “hot” samples that showed elevated concentrations of heavy metals. Particles that were classified as anthropogenic were finally analyzed to identify trace concentrations and chemical states of heavy metals.     

Electrochemical and ESR study of 5-nitrofuryl-containing thiosemicarbazones antiprotozoal drugs

Cyclic voltammetry and electron spin resonance (ESR) techniques were used in the investigation of several potential antiprotozoal thiosemicarbazones nitrofurane derivatives. A self-protonation process involving the protonation of the nitro group due to the presence of an acidic proton in the thiosemicarbazone moiety was observed in the first step of a CEE(rev) reduction mechanism of these derivatives. ESR spectra of the free radicals obtained by electrolytic reduction were characterized and analyzed. AM1 methodology was used to obtain the optimized geometries and UB3LYP calculations were performed to obtain the theoretical hyperfine coupling constants. The theoretical study exhibited an unusual assignment of the spin densities showing a free radical centered in the thiosemicarbazone moiety rather than the nitro which are in agreement with the experimental hyperfine pattern.     

Mineral speciation of copper and zinc in flying ash from a thermal power plant

Summary We studied the mineral speciation of Cu, Zn and Hg in fly ash from a large thermal plant burning lignite. By applying various treatments carried out under different conditions and taking into account the solubility and physical properties (boiling and melting point, etc.) and the behaviour towards combustion of the different possible compounds, we concluded that the ash assayed contained 109.6, 114.4 and 14.30 g/g of zinc silicate, zinc oxide and/or zinc sulphide and metal zinc, respectively, as well as 24.5 g/g of copper silicate and 31.2 g/g of a mixture of copper oxide, sulphide and metal. The formation of these compounds in the combustion of lignite is discussed.     

Fourth-order diagrammatic MB-RSPT calculations of the interaction energy between two helium atoms

The efficiency of the MB-RSPT in the calculations of the correlation contributions to the interaction energies was investigated, using He₂ as a model Van der Waals system. The attention has been focused on the convergency of the perturbation expansion in the calculations of the interaction energy and on the analysis of the fourth-order terms of MB-RSPT. The rôle of the renormalization term in the correct long-range behaviour of the interaction potential has been emphasized.     

Determination of sugar structures in solution from residual dipolar coupling constants: methodology and application to methyl beta-D-xylopyranoside

We have developed methodology for the determination of solution structures of small molecules from residual dipolar coupling constants measured in dilute liquid crystals. The power of the new technique is demonstrated by the determination of the structure of methyl beta-d-xylopyranoside (I) in solution. An oriented sample of I was prepared using a mixture of C(12)E(5) and hexanol in D(2)O. Thirty residual dipolar coupling constants, ranging from -6.44 to 4.99 Hz, were measured using intensity-based J-modulated NMR techniques. These include 15 D(HH), 4 (1)D(CH), and 11 (n)D(CH) coupling constants. The accuracy of the dipolar coupling constants is estimated to be < +/- 0.02 Hz. New constant-time HMBC NMR experiments were developed for the measurement of (n)D(CH) coupling constants, the use of which was crucial for the successful structure determination of I, as they allowed us to increase the number of fitted parameters. The structure of I was refined using a model in which the directly bonded interatom distances were fixed at their ab initio values, while 16 geometrical and 5 order parameters were optimized. These included 2 CCC and 6 CCH angles, and 2 CCCC and 6 CCCH dihedral angles. Vibrationally averaged dipolar coupling constants were used during the refinement. The refined solution structure of I is very similar to that obtained by ab initio calculations, with 11 bond and dihedral angles differing by 0.8 degrees or less and the remaining 5 parameters differing by up to 3.3 degrees . Comparison with the neutron diffraction structure showed larger differences attributable to crystal packing effects. Reducing the degree of order by using dilute liquid crystalline media in combination with precise measurement of small residual dipolar coupling constants, as shown here, is a way of overcoming the limitation of strongly orienting liquid crystals associated with the complexity of (1)H NMR spectra for molecules with more than 12 protons.     

Coupled-column liquid chromatography method with photochemically induced derivatization for the direct determination of benzoylureas in vegetables

The coupled-column (LC-LC) system, consisting of a first column packed with internal surface reversed phase (ISRP) (50 x 4.6mm ID) and a Chrompack C18 (100 x 4.6 mm ID) as second column, allowed the simultaneous determination of five benzoylurea insecticides in dichloromethane (CH2Cl2) extracts of vegetable samples without any clean-up step. This system was combined with a photochemically induced fluorescence (PIF) post-column derivatization in order to provide strongly fluorescent photoproducts from the non-fluorescent benzoylureas. Limits of detection ranged from 0.21 to 0.98 microg L(-1) of pesticide (equivalent to 0.14-0.65 microg kg(-1) in vegetable samples) and limits of determination ranged from 4.0 to 10.0 microg L(-1) (equivalent to 2.7-6.7 microg kg(-1)). Linearity of the method was established between 2 and 1800 microg L(-1), depending upon the compound. Validation of the total method was performed by randomly analyzing recoveries of four vegetable samples (aubergine, cucumber, green bean, and tomato) spiked at two levels of concentration (10.0 and 33.3 microg kg(-1)). The combination of the LC-LC system with PIF detection provides a sensitive, selective, and rapid method for the determination of pesticides in vegetable samples at levels lower than the maximum residue levels (MRLs) established for these compounds by Spanish legislation.