The ETACS European project for testing the comparability of sensors and analysers

ETACS is the official acronym for the European project "European Testing and Assessment of Comparability of On-line Sensors/Analysers". This project has three main objectives to achieve the comparability of performance data for sensors and analysers in the environmental field. First, to develop a test protocol for validation and comparison of the performance of on-line sensors/analysers. The test protocol is intended to be generic, that is independent of the specific sensors/analysers and the specific parameters to be monitored. Second, the practical testing of this test protocol to assess its applicability and to develop the techniques used. Finally, to achieve widespread acceptance of the test protocol by producer/suppliers, users and relevant authorities to assist its early adoption as an agreed European standard. Laboratory tests for producing the test protocol have been carried out and completed to check the applicability of such a protocol.     

Polarization of the Electrical Double Layer. Time Evolution after Application of an Electric Field

Electrophoresis is one of the electrokinetic phenomena most widely investigated, both from a fundamental point of view and as a research tool in academia and industry. However, the dependence between electrophoretic mobility and zeta potential is, in a general case, far from simple, because of the many physical processes involved. In this work, we first describe qualitatively and (in some cases) quantitatively the time behavior of the dipole moment induced in the electrical double layer by an applied electric field. Further, a simple relationship is deduced between the dipole moment and the electrophoretic mobility. Through the analysis of the time dependence of the former, it is possible to resolve the different contributions to the stationary values of the mobility. Three characteristic relaxation times are distinguished in the time evolution of the dipole moment: tau(H) (the time needed for hydrodynamic flows to be established), tau(MW) (time for ionic electromigration to develop), and tau(VD) (after this time, diffusion flows are established in the system, and the double layer polarization is complete). This means that different mechanisms are operating on the double layer for different times after the application of the field, and that computing the mobility at such different times is equivalent to calculating the steady-state electrophoretic mobility under different approximations. A comparison is shown between estimated and computed mobility values as functions of time and of zeta potential, confirming the validity of the asymptotic calculations. Copyright 2000 Academic Press.     

Chronocoulometry of tris-2,2′-bipyridine cobalt(II) and related transition metal complexes

Integrated pulse polarography and similar techniques have been used for study of reduction of bipyridine complexes of Co(II), Ni(II) and partially also Fe(II) in aqueous solutions. By proper choice of pulse and detection intervals, it is possible to confirm or separate the contribution of reactant adsorption. The pulse polarography of the product reoxidation shows a finite charge transfer rate in the case of tris-2,2′-bipyridine cobalt complex.     

Analytische Aspekte der Oxydation organischer Stickstoffverbindungen mit Chromsäure. XXVIII

Zusammenfassung Die schon früher beschriebene gasvolumetrische Methode zur N-N-Gruppenbestimmung durch Oxydationsaufschluß mit Chromsäure wurde zur Bestimmung des heterocyklischen Stickstoffes in Indazolinonderivaten mit Erfolg benützt und dadurch weiter die allgemeine Anwendbarkeit der Methode bestätigt. Enthält die Substanz gleichzeitig Amino- oder Nitrogruppen, können diese aus derselben Einwaage als Ammoniak bzw. Salpetersäure bestimmt werden.

---

Analytical aspects of the oxidation of organic nitrogen compounds with chromic acid

Summary The gas volumetric method for determining N-N groups by oxidative fusion with chromic acid (which has already been described previously) was successfully employed to determine the heterocyclic nitrogen in indazolinone derivatives. The general applicability of the method was thereby confirmed. If the substance contains amino or nitro groups at the same time, these can be determined in the same sample as ammonia or nitric acid.

---

---

XXVII. Mitteilung, siehe¹.     

Comparison of mass spectrometric methods for studying thermally labile compounds: Rifapentine

Results of 16 different mass spectrometric ionization and sample-introduction methods are compared for the case of a thermally very labile antibiotic, rifapentine. These suggest that extensive thermal decomposition occurs during evaporation when the sample can come into contact with hot metal parts, usually the source housing. The intensity of the molecular ion and the extent of fragmentation depend on various parameters, such as the ionization process, positive or negative-ion detection and the type of sample introduction. The most informative methods for rifapentine seem to be ‘in-beam’ electron impact, negative ionization with particle beam and direct liquid introduction interfaces and positive- and negative-ion fast atom bombardment.     

Derivative spectrophotometric resolution of mixtures of the food colourants Tartrazine, Amaranth and Curcumin in a micellar medium

A study of the absorption spectra of the food colourants Tartrazine (E-102), Amaranth (E-123) and Curcumin (E-100) in various organic solvents and pH media, have been carried out. In addition, the spectral behaviour in aqueous micellar systems of anionic, cationic and non-ionic surfactants, as well as beta-cyclodextrin, was investigated. Analytical methods are proposed for the determination of the three dyes in mixtures without any prior separation step, by the application of the derivative technique to the normal absorption spectra, based on the use of cetyltrimethylammonium bromide (CTAB) in 0.1 M NaOH, over the concentration range 2-50 mug ml(-1). The methods are applied for determining the three dyes in commercial food products.     

Synthesis and acid-base properties of (1H-benzimidazol-2-yl-methyl)phosphonate (Bimp2-). Evidence for intramolecular hydrogen-bond formation in aqueous solution between (N-1)H and the phosphonate group

The synthesis of (1H-benzimidazol-2-yl-methyl)phosphonic acid, H2(Bimp)+/-, is described: 2-chloromethylbenzimidazole was reacted with ethylchloroformate to give 1-carboethoxy-2-chloromethylbenzimidazole which was treated with trimethyl phosphite and after hydrolysis with aqueous HBr H2(Bimp)+/- was obtained. In H2(Bimp)+/- one proton is at the N-3 site and the other at the phosphonate group; both acidity constants were determined in aqueous solution by potentiometric pH titrations (25 degrees C; I = 0.1 M, NaNO3) and this furnished the pKa values of 5.37 +/- 0.02 and 7.41 +/- 0.02, respectively. The acidity constant for the release of the primary proton from the P(O)(OH)2 group of H3(Bimp)+ was estimated: pKa = 1.5 +/- 0.2. Moreover, Bimp2- can be further deprotonated at its neutral (N-1/N-3)H site to give the benzimidazolate residue, but this reaction occurs only in strongly alkaline solution (KOH); application of the H_ scale developed by G. Yagil (J. Phys. Chem., 1967, 71, 1034) together with UV spectrophotometric measurements gave pKa = 14.65 +/- 0.12. Comparisons with acidity constants taken from the literature show that this latter pKa value is far too large and this allows the conclusion that an intramolecular hydrogen bond is formed between the (N-1/N-3)H site and the phosphonate group of Bimp2-; the formation degree of this hydrogen-bonded isomer is estimated to be 98 +/- 2%. The general relevance of this and the other results are shortly discussed and the species distribution for the Bimp system in dependence on pH is provided.     

Quantitative analysis of six pesticides in fruits by capillary electrophoresis-electrospray-mass spectrometry

A method to identify and quantify six pesticide residues - dinoseb, pirimicarb, procymidone, pyrifenox, pyrimethanil, and thiabendazole - in peaches and nectarines using capillary electrophoresis-electrospray ionization-quadrupole ion trap-tandem mass spectrometry (CE-ESI-MS/MS) is described. Separation was carried out using a buffer of 0.3 M ammonium acetate at pH 4 with 10% methanol. Pesticide residues present in peach and nectarine samples were preconcentrated by solid-phase extraction using C(18), eluted with CH(2)Cl(2), concentrated to dryness, and redissolved in buffer to obtain lower detection limits. The recoveries of the analytes ranged from 58 to 99% and the relative standard deviations were 9 to 19%. Under optimized CE-MS/MS conditions the minimum detectable levels for the six pesticides in spiked peach samples were between 0.01 mg/kg for pirimicarb and 0.05 mg/kg for procymidone with pressure injection of 50 mbar for 5 s (5 nL) at a signal-to-noise ratio of 3, which constitutes a severalfold increase in sensitivity compared to CE-MS, using a single quadrupole, and to conventional CE-UV. The potential of the method was demonstrated by analyzing different samples taken from regional agricultural cooperatives. The pesticides most often detected were thiabendazole and procymidone.     

New Hg2+ and Cu2+ selective chromo- and fluoroionophore based on a bichromophoric azine

[graph: see text] A new probe, 1,4-bis(1-pyrenyl)-2,3-diaza-1,3-butadiene, selectively senses Hg2+ and Cu2+ through two different channels: the yellow-deep-pink color change and the enhancement of the fluorescence with the red shift of the excimer emission, which can visually be discernible by a green fluorescence in the presence of Hg2+ and an orange fluorescence in the presence of Cu2+.     

A simple and very sensitive spectrophotometric method for the direct determination of copper ions

A sensitive spectrophotometric method for the direct determination of copper in aqueous samples without a preconcentration step has been developed. It is based on the formation of a yellow complex with the chromogenic reagent di-2-pyridyl ketone benzoylhydrazone (dPKBH) in an alkaline medium. The complex stoichiometry was 1:2 (Cu:dPKBH) and presents maximum absorbance at 370 nm. The influence of chemical variables affecting the behaviour of the system such as pH, concentration of dPKBH, buffer solution and ethanol, order of addition of the reagents and stability of the complex, were evaluated. The molar absorptivity (epsilon) was 3.92x10(4) L mol(-1) cm(-1), and Beer's law was obeyed up to 3 mg L(-1) of copper. The relative standard deviation was 0.46% (n=11) for a sample containing 1 mg L(-1) Cu(II). The limit of detection was 2.5 micro g L(-1) and was therefore more sensitive than the direct methods reported previously. Finally, the method was successfully validated by analysing several real samples with different matrices, such as tap water, natural water or copper alloys, with an average relative error of 2.46%.