Cleavage of Carbon Dioxide C=O Bond Promoted by Nickel-Boron Cooperativity in a PBP-Ni Complex

The synthesis and characterization of (^tBuPBP)Ni(OAc) ( 5 ) by insertion of carbon dioxide into the Ni−C bond of (^tBuPBP)NiMe ( 1 ) is presented. An unexpected CO₂ cleavage process involving the formation of new B−O and Ni−CO bonds leads to the generation of a butterfly-structured tetra-nickel cluster (^tBuPBOP)₂Ni₄(μ-CO)₂ ( 6 ). Mechanistic investigation of this reaction indicates a reductive scission of CO₂ by O-atom transfer to the boron atom via a cooperative nickel-boron mechanism. The CO₂ activation reaction produces a three-coordinate (^tBuP₂BO)Ni-acyl intermediate ( A ) that leads to a (^tBuP₂BO)−Ni^I complex ( B ) via a likely radical pathway. The Ni^I species is trapped by treatment with the radical trap (2,2,6,6-tetramethylpiperidin-1-yl)oxyl (TEMPO) to give (^tBuP₂BO)Ni^II(η²-TEMPO) ( 7 ). Additionally, ¹³C and ¹H NMR spectroscopy analysis using ¹³C-enriched CO₂ provides information about the species involved in the CO₂ activation process.     

Study of the Energy Resolution in Alpha-Particle Spectra from Electrodeposited Radium Sources

Electrodeposited ²²⁶Ra sources were prepared and measured in order to perform a detailed study of the energy resolutions attained with two recent electrodeposition procedures for preparing spectrometric radium sources. The values of the energy resolution for the high-energy emission of ²²⁶Ra and for the single-emissions of ²¹⁰Poand ²²²Rn were calculated by fitting the data with a curve formed by the convolution of two left-handed exponentials with a Gaussian function. Significant differences between the energy resolutions for the aforementioned radionuclides were observed. The ²¹⁰Po energy resolutions were, in general, somewhat better than those obtained for ²²⁶Ra. On the contrary, the energy resolutions found for ²²²Rn were notably poorer than those obtained for ²²⁶Ra and ²¹⁰Po. These discrepancies can be satisfactorily explained by taking into consideration the distribution of these nuclides in the sources and the effect of radon diffusion involved in this type of thin deposit.     

Monte Carlo and modified Tanford-Kirkwood results for macromolecular electrostatics calculations

The understanding of electrostatic interactions is an essential aspect of the complex correlation between structure and function of biological macromolecules. It is also important in protein engineering and design. Theoretical studies of such interactions are predominantly done within the framework of Debye-Hückel theory. A classical example is the Tanford-Kirkwood (TK) model. Besides other limitations, this model assumes an infinitesimally small macromolecule concentration. By comparison to Monte Carlo (MC) simulations, it is shown that TK predictions for the shifts in ion binding constants upon addition of salt become less reliable even at moderately macromolecular concentrations. A simple modification based on colloidal literature is suggested to the TK scheme. The modified TK models suggested here satisfactorily predict MC and experimental shifts in the calcium binding constant as a function of protein concentration for the calbindin D(9k) mutant and calmodulin.     

Neutron-induced fission cross sections of short-lived actinides with the surrogate reaction method

Neutron-induced fission cross sections for ^242,243Cm and ²⁴¹Am have been obtained with the surrogate reaction method. Recent results for the neutron-induced cross section of ²⁴³Cm are questioned by the present data. For the first time, the ²⁴²Cm cross section has been determined up to the onset of second-chance fission. The good agreement at the lowest excitation energies between the present results and the existing neutron-induced data indicates that the distributions in spin and parity of states populated with both techniques are similar.     

<Superscript>210</Superscript>Pb and <Superscript>210</Superscript>Po determination in environmental samples using liquid scintillation counting and alpha spectrometry

A simple radiochemical procedure has been developed to determine ²¹⁰Pb and ²¹⁰Po in environmental samples from the same matrix. Sediment samples are decomposed by leaching with mineral acids or by microwave digestion, while water samples are pre-concentrated. One part of the resulting solution, spiked with ²⁰⁹Po, is used for ²¹⁰Po determination by spontaneous deposition onto nickel disks (α-spectrometry). The other part is assayed for ²¹⁰Pb, separating the Pb either by anion-exchange (sediment samples), or by solvent extraction (water samples). The ²¹⁰Pb source is finally prepared by precipitation as oxalate and the chemical recovery determined by gravimetry. The ²¹⁰Pb activity concentration is determined by liquid scintillation. A standard sediment sample supplied by IAEA and spiked water samples were analysed to check the procedure. The ²¹⁰Pb and ²¹⁰Po measurements agreed well with the certifications, deviations being less than 10%. The mean recoveries for Pb and Po were (70±12)% and (77±8%) for sediments, and (70±10)% and (81±7)% for waters, respectively.     

铸造铝青铜合金Cu-14Al-4Fe-Mn的摩擦磨损性能

用往复式摩擦磨损试验机考察了新型高强度、高耐磨性铸造铝青铜合金Cu-14Al-4Fe-Mn(代号HSWAB)的摩擦磨损性能,利用形貌扫描电子显微镜观察分析了合金磨损表面形貌,探讨了其磨损机理.结果表明,HSWAB合金在干摩擦和油润滑条件下的摩擦磨损性能及磨损机理存在明显差异.在干摩擦条件下,合金中脱落的硬质点及氧化物等磨粒导致较为严重的磨粒磨损,摩擦系数高、磨损率大,主要磨损机理为磨粒磨损、粘着磨损、氧化磨损及疲劳磨损.在油润滑条件下,摩擦系数和磨损率均显著降低,疲劳磨损和氧化磨损受到抑制,主要磨损机理为磨粒磨损和粘着磨损.Cu-14Al-4Fe-Mn合金在油润滑条件下的摩擦系数低达0.08,磨损率低达3.7×10-6g/m,是一种优良的耐磨材料.     

Adsorption and Activation of CO2 on Nitride MXenes: Composition,Temperature, and Pressure effects

The interaction of CO₂ with nitride MXenes of different thickness is investigated using periodic density functional theory-based calculations and kinetic simulations carried out in the framework of transition state theory, the ultimate goal being predicting their possible use in Carbon Capture and Storage (CCS). We consider the basal (0001) surface plane of nitride MXenes with M_n+1N_n (n=1–3; M=Ti, Zr, Hf, V, Nb, Ta, Cr, Mo, and W) stoichiometry and also compare to equivalent results for extended (001) and (111) surfaces of the bulk rock-salt transition metal nitride compounds. The present results show that the composition of MXenes has a marked influence on the CO₂-philicity of these substrates, whereas the thickness effect is, in general, small, but not negligible. The largest exothermic activation is predicted for Ti-, Hf-, and Zr-derived MXenes, making them feasible substrates for CO₂ trapping. From an applied point of view, Cr-, Mo-, and W-derived MXenes are especially well suited for CCS as the interaction with CO₂ is strong enough but molecular dissociation is not favored. Newly developed kinetic phase diagrams are introduced supporting that Cr-, Mo-, and W-derived MXenes are appropriate CCS substrates as they are predicted to exhibit easy capture at mild conditions and easy release by heating below 500 K.     

Five closely related 4‐chloro‐6,11‐dihydro‐5H‐benzo[b]pyrimido[5,4‐f]azepines: similar molecular structures but different supramolecular assemblies

Dibenz[b,f]azepine (DBA) is a privileged 6‐7‐6 tricyclic ring system of importance in both organic and medicinal chemistry. Benzo[b]pyrimido[5,4‐f]azepines (BPAs), which also contain a privileged 6‐7‐6 ring system, are less well investigated, probably because of a lack of straightforward and versatile methods for their synthesis. A simple and versatile synthetic approach to BPAs based on intramolecular Friedel–Crafts alkylation has been developed. A group of closely‐related benzo[b]pyrimido[5,4‐f]azepine derivatives, namely (6RS)‐4‐chloro‐6,11‐dimethyl‐6,11‐dihydro‐5H‐benzo[b]pyrimido[5,4‐f]azepine, C₁₄H₁₄ClN₃, (I), (6RS)‐4‐chloro‐8‐hydroxy‐6,11‐dimethyl‐6,11‐dihydro‐5H‐benzo[b]pyrimido[5,4‐f]azepine, C₁₄H₁₄ClN₃O, (II), (6RS)‐4‐<!?tlsb=‐0.14pt>chloro‐8‐methoxy‐6,11‐dimethyl‐6,11‐dihydro‐5H‐benzo[b]pyrimido[5,4‐f]azepine, C₁₅H₁₆ClN₃O, (III), and (6RS)‐4‐chloro‐8‐methoxy‐6,11‐dimethyl‐2‐phenyl‐6,11‐dihydro‐5H‐benzo[b]pyrimido[5,4‐f]azepine, C₂₁H₂₀ClN₃O, (IV), has been prepared and their structures compared with the recently published structure [Acosta‐Quintero et al. (2015). Eur. J. Org. Chem. pp. 5360–5369] of (6RS)‐4‐chloro‐2,6,8,11‐tetramethyl‐6,11‐dihydro‐5H‐benzo[b]pyrimido[5,4‐f]azepine, (V). All five compounds crystallize as racemic mixtures and they have very similar molecular conformations, with the azepine ring adopting a boat‐type conformation in each case, although the orientation of the methoxy substituent in each of (III) and (IV) is different. The supramolecular assemblies in (II) and (IV) depend upon hydrogen bonds of the O—H...N and C—H...π(arene) types, respectively, those in (I) and (V) depend upon π–π stacking interactions involving pairs of pyrimidine rings, and that in (III) depends upon a π–π stacking interaction involving pairs of phenyl rings. Short C—Cl...π(pyrimidine) contacts are present in (I), (II) and (IV) but not in (III) or (V).