Assessment of fluoroalkyltin compounds as fluorous Lewis acid catalysts

The synthesis of a variety of organotin compounds with 1H, 1H, 2H, 2H‐perfluorooctyl groups is reported, together with an improved method for the corresponding distannoxane. Unique properties of this compound are disclosed in terms of fluorophilicity and activity as a Lewis acid catalyst in comparison with other mono‐nuclear derivatives. A new criterion for obtaining high solubility in fluorocarbon solvents is presented. Copyright © 2003 John Wiley & Sons, Ltd.     

Sorption and partial molar volume of gases in poly (dimethyl siloxane)

Sorption of N₂, O₂, Ar, CH₄, CO₂, C₂H₄, and C₂H₆ in poly (dimethyl siloxane) liquid and rubber and the dilation of the polymers due to sorption of the gases are studied at 25°C under pressures up to 50 atm. In the liquid, the sorption isotherms for low-solubility and high-solubility gases are described by Henry's law and the Flory–Huggins equation, respectively. Gas sorption in the rubber, which contains a 29 wt % silica filler, follows the dual-mode sorption model, though marked hysteresis is observed in the sorption of O₂ and CH₄. The dilation isotherms increase linearly or exponentially in both polymers with increasing pressure. Considering that gas molecules adsorbed into micropores of the filler particles do not participate in the dilation, partial molar volumes of the dissolved gases in the rubber are determined from data of sorption and dilation. The values are nearly equal to the partial molar volumes in the liquid (48–60 cm³/mol).     

Analysis of a cylindrical shell with spiral groove

Summary The analytical method is presented for a cylindrical shell with spiral groove. The governing equations of cylindrical shell derived by one of the authors are introduced and Kirchhoff's boundary conditions along any smooth path are deduced from the principle of energy. The analysis is carried out for a cylindrical shell under a uniform bending moment by considering the equilibrium conditions of a shell element. Numerical results are given for various geometrical parameters of cylindrical shell and the angle of the spiral groove, some of which are confirmed by an experiment.

---

übersicht Die analytische Methode wird für eine Kreiszylinderschale mit spiraler Fuge entwickelt. Die von einem der Verfasser eingeführten Differentialgleichungen der Kreiszylinderschale und die Kirchhoffschen Randbedingungen l?ngs des beliebig geneigten Randes, die vom Prinzip der Energie hergeleitet wurden, werden angegeben. Das Problem der Kreiszylinderschale mit spiraler Fuge unter einem uniformen Biegemoment wird unter Berücksichtigung der komplizierten Gleichgewichtsbedingungen der Schalenelemente analysiert. Die numerischen Ergebnisse zeigen gute übereinstimmung mit experimentellen Ergebnissen.

     

An Anti CuO2‐type Metal Hydride Square Net Structure in Ln2M2As2Hx (Ln=La or Sm,M=Ti,V, Cr,or Mn)

Using a high pressure technique and the strong donating nature of H⁻, a new series of tetragonal La₂Fe₂Se₂O₃‐type layered mixed‐anion arsenides, Ln₂M₂As₂H_x, was synthesized (Ln=La or Sm, M=Ti, V, Cr, or Mn; x≈3). In these compounds, an unusual M₂H square net, which has anti CuO₂ square net structures accompanying two As³⁻ ions, is sandwiched by (LaH)₂ fluorite layers. Notably, strong metal–metal bonding with a distance of 2.80 Å was confirmed in La₂Ti₂As₂H_2.3, which has metallic properties. In fact, these compounds are situated near the boundary between salt‐like ionic hydrides and transition‐metal hydrides with metallic characters.     

Detection of interfacial phenomena with osteoblast-like cell adhesion on hydroxyapatite and oxidized polystyrene by the quartz crystal microbalance with dissipation

The adhesion process of osteoblast-like cells on hydroxyapatite (HAp) and oxidized polystyrene (PSox) was investigated using a quartz crystal microbalance with dissipation (QCM-D), confocal laser scanning microscope (CLSM), and atomic force microscope (AFM) techniques in order to clarify the interfacial phenomena between the surfaces and cells. The interfacial viscoelastic properties (shear viscosity (η(ad)), elastic shear modulus (μ(ad)), and tan δ) of the preadsorbed protein layer and the interface layer between the surfaces and cells were estimated using a Voigt-based viscoelastic model from the measured frequency (Δf) and dissipation shift (ΔD) curves. In the ΔD-Δf plots, the cell adhesion process on HAp was classified as (1) a mass increase only, (2) increases in both mass and ΔD, and (3) slight decreases in mass and ΔD. On PSox, only ΔD increases were observed, indicating that the adhesion behavior depended on the surface properties. The interfacial μ(ad) value between the material surfaces and cells increased with the number of adherent cells, whereas η(ad) and tanδ decreased slightly, irrespective of the surface. Thus, the interfacial layer changed the elasticity to viscosity with an increase in the number. The tan δ values on HAp were higher than those on PSox and exceeded 1.0. Furthermore, the pseudopod-like structures of the cells on HAp had periodic stripe patterns stained with a type I collagen antibody, whereas those on PSox had cell-membrane-like structures unstained with type I collagen. These results indicate that the interfacial layers on PSox and HAp exhibit elasticity and viscosity, respectively, indicating that the rearrangements of the extracellular matrix and cytoskeleton changes cause different cell-surface interactions. Therefore, the different cell adhesion process, interfacial viscoelasticity, and morphology depending on the surfaces were successfully monitored in situ and evaluated by the QCM-D technique combined with other techniques.     

Effect of interfacial proteins on osteoblast-like cell adhesion to hydroxyapatite nanocrystals

A quartz crystal microbalance with dissipation (QCM-D) technique was employed to detecting the protein adsorption and subsequent osteoblast-like cell adhesion to hydroxyapatite (HAp) nanocrystals. The interfacial phenomena with the preadsorption of three proteins (albumin (BSA), fibronectin (Fn), and collagen (Col)), the subsequent adsorption of fetal bovine serum (FBS), and the adhesion of the cells were investigated. The QCM-D measured the frequency shift (Δf) and dissipation energy shift (ΔD), and the viscoelastic properties of the adlayers were evaluated using ΔD-Δf plot and Voigt-based viscoelastic model. The Col adsorption significantly showed higher Δf, ΔD, elasticity, and viscosity values as compared to the BSA and Fn adsorption, and the subsequent FBS adsorption depended on the preadsorbed proteins. The ΔD-Δf plot of the cell adhesion also showed a different behavior depending on the surfaces, and the Fn- and Col-modified surfaces showed the rapid mass and ΔD changes by forming the viscous interfacial layers with cell adhesion, indicating that the processes were affected by the cellular reaction through the extracellular matrix (ECM) proteins. The confocal laser scanning microscope images of adherent cells showed a different morphology and pseudopod on the surfaces. The cells adhered to the surfaces modified with the Fn and Col had significantly uniaxially expanded shapes and fibrous pseudopods, and those modified with the BSA had a round shape. Therefore, the different cell-protein interactions would cause the arrangement of the ECM and the cytoskeleton changes at the interfaces, and these phenomena were successfully detected by the QCM-D and Voigt-based model.     

Nonexistence of type II blowup solution for a semilinear heat equation

A solution u of a Cauchy problem for a semilinear heat equation