Bis(crown-6)calix[4]arene/Cs+ Coordination Chemistry in NPME Solution

NMR spectroscopy was used to show that the symmetry of the crown ether bis(C6) is increased by an increase of the alkali metal cation radius. The EXAFS spectrum demonstrates that a seven oxygen atom coordinated configuration is present in the bis(C6)/Cs⁺/NPME system, where NPME denotes o-nitrophenylmethyl ether. The seventh oxygen in this complex, besides the six crown ether oxygens of bis(C6), may come either from a H₂O molecule or an NO₃⁻ ion.     

联萘冠醚的合成新方法

一种用于合成含联萘基冠醚的新方法。以消旋，手性联萘酚为起始原料，先与氯乙醇反应制得2,2'-二（2－羟基乙氧基）－1,1'－联二苯，再与二甘醇或三甘醇对二对甲苯磺酸酯反应，成功制得了4种联萘冠醚。     

Organoaluminium and -gallium compounds with N,N-diisopropylaminomethyl groups

The N,N-diisopropylaminomethyl aluminium compound [tBu2AlCH2NiPr2 x LiCl]2(1) and the gallium compounds Li[tBu2Ga(CH2NiPr2)2](2) and [tBu2GaCH2N(H)iPr2]Cl x tBu3Ga (3) were prepared by transmetallation of N,N-diisopropylaminomethyllithium LiCH2NiPr2 with di-tert-butylaluminium or -gallium chloride, and characterised by elemental analyses, multinuclear NMR spectroscopy (1H, 13C, 27Al, 7Li) and IR spectroscopy. The crystal structures have been determined by single crystal X-ray diffraction. Compound aggregates as a centrosymmetric dimer, with two Al-C-N units connected by a frame of two LiCl molecules [Al-Cl 2.367(1), Cl-Li 2.339(4) and 2.374(4), Li-N 1.977(4)A]. Compound 2 is a lithium organogallate with two weak LiN bonds [1.965(7) and 1.937(7)A]. Compound 3 contains two different moieties: tBu3Ga and a [tBu2GaCH2N(H)iPr2]+ cation, which are bridged by a Cl- anion [Ga-Cl 2.445(1) and 2.579(1), HCl 2.362(3)A].     

AlCn及AlC+n(n=1-4)原子簇的理论研究

用ab initio能量解析梯度法，在UHF（RHF）／3－21G水平上优化得到AlCn，AlCn+（n＝1～3）的四十三个构型，在RHF（UHF）／3－21G水平上优化得到AlC4，AlC4+的二十六个构型，CISD能量．从能量角度所研究的AlCn，AlCn+（n=1～4）构型中，最稳定的构型均是线性构型，且Al全都在端点上，同文献报导的理论和实验结果相一致．此外，还研究了原子簇的离子化能，原子平均结合能以及原子簇的碎片化通道和碎片化能，并计算了上述最稳定构型的谐振动光谱常数．     

Cu(bpy)22+—Nafion聚合物膜修饰电极研究

在目前的聚合物膜修饰电极领域中引起人们极大的研究兴趣,这是因为用离子交换方法可将许多电化学或电催化活性的阳离子物种固定于Nafion膜中,构成具有离子导电功能和特定电化学性质的膜合物膜修饰电极。     

Structures, stabilities, and electronic and optical properties of c(58) fullerene isomers, ions, and metallofullerenes.

The 1205 classical isomers of fullerene C58, as well as one quasi-fullerene C58 isomer with a heptagonal ring (labeled as Cs:hept) have been investigated by the quantum chemical methods PM3, HCTH/3-21G, and B3LYP/6-31G(d). Isomer C3v:0001, which has the lowest number of adjacent pentagons, is predicted to be the most stable isomer, but the quasi-fullerene isomer Cs:hept is only 2.50 kcal mol-1 higher in energy. Systematic investigations of the electronic properties of C3v:0001 and Cs:hept find that the C3v:0001 isomer has high vertical electron affinity (3.19 eV). The nucleus-independent chemical shifts (NICS) value at the center of Cs:hept (-5.1 ppm) is more negative than that of C60 (-2.8 ppm). The NICS value at the center of the heptagonal ring in Cs:hept (-2.5 ppm) indicates weakly aromatic character. In contrast, the C58(6-) and C58(8-) ions of the C3v:0001 and Cs:hept geometries possess large aromatic character, with NICS values between -14.0 and -26.2 ppm. To clarify the thermodynamic stabilities of C58 isomers at different temperatures, the entropy contributions are taken into account on the basis of the Gibbs energy at the B3LYP/6-31G(d) level. The C3v:0001 isomer prevails in a wide range of temperatures, and the Cs:hept isomer is also an important component around 2800 K. The IR spectra of C58 isomers are simulated to facilitate experimental identification of different isomers. In addition, the electronic spectra and the second-order hyperpolarizabilities are predicted by ZINDO and the sum-over-states model. The static second-order hyperpolarizability of the C3v:0001 isomer is 96.5 % larger than that of C60, and its second-order hyperpolarizabilities at external field frequencies are at least nine times larger than those of C60.     

Diterpene derivative and chromone from Hypericum perforatum

A novel diterpene derivative, 5-methyl-5-(4,8,12-trimethyl-tridecyl)-dihydro-furan-2-one (1) and a new chromone, 5-hydroxy-7-methoxy-3-methyl-chromen-4-one (2), along with a known compound, phytol (3) have been isolated from the aerial parts of Hypericum perforatum. Their structures were established on the basis of spectroscopic analysis and by comparison with published values.     

On the Randić Index of Acyclic Conjugated Molecules

The Randić index of an organic molecule whose molecular graph is G is the sum of the weights (d(u)d(v))^−1/2 of all edges uv of G, where d(u) and d(v) are the degrees of the vertices u and v in G. We give a sharp lower bound on the Randić index of conjugated trees (trees with a perfect matching) in terms of the number of vertices. A sharp lower bound on the Randić index of trees with a given size of matching is also given Mei Lu: Partially supported by NNSFC (No. 60172005) Lian-zhu Zhang: Partially supported by NNSFC (No. 10271105) Feng Tian: Partially supported by NNSFC (No. 10431020)     

Spectrophotometric flow injection determination of trace iodide in table salt and laver through the reaction of iodate with 3,5-Br2-PADAP and thiocyanate

A new simple, rapid and sensitive spectrophotometric flow injection method for the determination of trace iodide is described based on an ion associate of iodate (IO₃ ^–) with 2- (3,5-dibromo-2-pyridylazo)-5-diethylamino-phenol (3,5-Br₂-PADAP) and thiocyanate (SCN^–). In a strongly acidic medium, this unstable violet product was formed with an absorption maximum at 605 nm. Flow injection is an ideal method to reproducibly monitor the transient signal. Various parameters were optimized using the Super Modified Controlled Weighted Centroid Simplex Method (SMCWC). Under the optimum experimental conditions, iodide could be determined in the range of 1.00 × 10^–6 and 2.4 × 10^–5 mol l^–1. The correlation coefficient of the calibration curve is 0.9991. With a sampling frequency of 80 h^–1, the detection limit for iodide is 5.0 × 10^–7 mol l^–1. The proposed method has been applied to the determination of trace iodide after oxidizing I^– in table salt or laver to IO₃ ^–. In addition, the mechanisms of the ion association reaction was studied. Received: 15 August 1996 / Revised: 10 October 1996 / Accepted: 16 October 1996     

Preparation of 103Pd seeds Part II. “Molecular Plating” of 103Pd onto copper rod

A method for ¹⁰³Pd molecular plating onto the surface of the copper rod is reported. The optimal composition of the plating bath was: palladium chloride 2 g/l, ammonium hydroxide (28%) 150 ml/l, sodium hypophosphite 12 g/l, and ammonium chloride 37 g/l. The whole procedure of ¹⁰³Pd molecular plating will last 50 minutes at 40 °C. This article provides valuable experience for the preparation of ¹⁰³Pd seeds.