物理有机化学前沿领域两个主要方面--有机分子簇集和自由基化学研究

物理有机化学是现代有机化学的主要理论基础,是当今有机化学中最富有活力的领域之一,它是建立在现代物理学和物理化学的基础上,用物理化学的、定量的、数学的方法来研究有机化学.     

利用跟踪TPR—GC和XRD技术考察LaNiO3的还原机理

钙钛矿型复合氧化物对许多反应具有较高的催化活性,它们被广泛地用作CO氧化的催化剂.陈水华等对SmMeO_3(Me:V、Cr、Mn、Fe、Co)和Tascon等对LaMeO_3(Me:V、Cr、Mn、Fe、Co、Ni)上CO催化活性评价说明,LnMnO_3和LnCoO_3(Ln=La、Sm)活性最好,而LaNiO_3则表现和LaCoO_3相似活性,由此可推断这些氧化物具有相似的催化性能.本文用TPR-GC和XRD考察了在还原气氛下,LaNiO_3的还原机理,这对研究其电、磁特性具有一定的指导意义.     

pH值对聚四氨基酞菁钴膜电化学和紫外光谱性质的影响

用循环伏安法在导电玻璃(ITO)和玻碳电极(GC)上制备了聚氨基酞菁钴(CoTAPc)修饰电极(CoTAPc/GC)。探讨了pH值对CoTAPc膜的光谱和电化学性质的影响，发现其氧化还原电位与pH值有线性关系，电催化活性也随酸度的增加而增加。CoTAPc膜的紫外吸收带变化与溶液pH值及在溶液中浸泡时间有关。     

Efficient dehalogenation of polyhalomethanes and production of strong acids in aqueous environments: water-catalyzed O--H-insertion and HI-elimination reactions of isodiiodomethane (CH2I-I) with water

A combined experimental and theoretical study of the ultraviolet photolysis of CH2I2 in water is reported. Ultraviolet photolysis of low concentrations of CH2I2 in water was experimentally observed to lead to almost complete conversion into CH2(OH)2 and 2HI products. Picosecond time-resolved resonance Raman spectroscopy experiments in mixed water/acetonitrile solvents (25%-75% water) showed that appreciable amounts of isodiiodomethane (CH2I-I) were formed within several picoseconds and the decay of the CH2I-I species became substantially shorter with increasing water concentration, suggesting that CH2I-I may be reacting with water. Ab initio calculations demonstrate the CH2I-I species is able to react readily with water via a water-catalyzed O--H-insertion and HI-elimination reaction followed by its CH2I(OH) product undergoing a further water-catalyzed HI-elimination reaction to make a H2C=O product. These HI-elimination reactions produce the two HI leaving groups observed experimentally and the H2C=O product further reacts with water to produce the other final CH2(OH)2 product observed in the photochemistry experiments. These results suggest that CH2I-I is the species that reacts with water to produce the CH2(OH)2 and 2HI products seen in the photochemistry experiments. The present study demonstrates that ultraviolet photolysis of CH2I2 at low concentration leads to efficient dehalogenation and release of multiple strong acid (HI) leaving groups. Some possible ramifications for the decomposition of polyhalomethanes and halomethanols in aqueous environments as well as the photochemistry of polyhalomethanes in the natural environment are briefly discussed.     

EFFECT OF MOLECULAR WEIGHT OF PDMS ON MORPHOLOGY AND MECHANICAL PROPERTIES OF PP/PDMS BLENDS

 A series of polydimethylsiloxane (PDMS) with varied molecular weights (Mw = 3  106, 1  106 and 0.5  106) were melt blended with PP to investigate the effect of PDMS molecular weight (MW) on the morphology and mechanical properties of PP/PDMS blends. Scanning electron microscopic (SEM) examination showed that the size of PDMS domains was dependent on the MW of PDMS. It was found that the lower the value of PDMS MW, the better dispersion of the PDMS domains in the PP matrix. Tensile and Izod impact tests revealed that the addition of PDMS with lower MW would lead to a more significant increase in impact strength of the blends compared with the blends with higher MW ones, while the influence of the molecular weight on tensile strengths of the blends was relatively small in the MW range studied. Differential scanning calorimetry (DSC) results also showed that the crystallization temperature of PP was increased with decreasing PDMS MW, indicating a better nucleation capability of lower MW of PDMS. Melting flow rate (MFR) measurements indicated that the processibility of PP could be enhanced by adding PDMS, and again the lower MW PDMS resulted in better data. Our work demonstrates that not only the processibility but also the mechanical properties of PP could be enhanced to a more significant degree by using low MW PDMS than the higher ones.     

Sensitive Determination of DNA by Resonance Light Scattering with Pentamethoxyl Red

A novel sensitive method for the determination of nucleic acid (DNA) using the resonance light scattering (RLS) spectra of pentamethoxyl red has been developed. It is based on the effects on the resonance light scattering of Pentamethoxyl Red. The effective factors and the optimum conditions were studied, and the enhanced intensity of RLS is in proportion to the concentration of nucleic acids in the range of 0–2.54 µg mL⁻¹ for ct-DNA, 0–4.54 µg mL⁻¹ for hs-DNA. The limits of detection are 1.1 and 2.1 ng mL⁻¹, respectively. Most foreign substances do not interfere in the determination, and the method has good selectivity and high sensitivity. It has been applied to the determination of DNA in synthetic samples and in real samples with satisfactory results.     

4,4′-(多苯基三联苯)双(有机硅烷)的合成

前文曾经报道利用四苯基环戊二烯酮为双烯体,乙烯基或烯丙基三乙氧基硅烷及其硅氧烷为亲双烯体通过Diels-Alder反应合成的多苯基芳基有机硅化合物作为硅橡胶的热     

一个新的铀（Ⅵ）三元协萃体系

研究了由４，４＇－癸二酰－双－（１－苯基－３－甲基－５－吡唑啉酮）（ＤＢＰＭＰ，简作Ｈ２Ａ），氧化三辛基膦（ＴＯＰＯ），吡啶（Ｐｙ）组成的三元体系从硝酸溶液中对铀的协同萃取，斜率法确定萃合物组成为ＵＯ２Ａ．ＴＯＰＯ．Ｐｙ，制取了固体协萃配合物，并用元素分析、ＩＲ及ＨＮＭＲ等进行了表征。     

Micro-sized Sb2O3 octahedra fabricated via a PEG-1000 polymer-assisted hydrothermal route

The micro-sized Sb₂O₃ octahedra can be synthesized on a large scale via a simple PEG-1000 polymer-assisted hydrothermal route (PAHR) in the temperature range of 160-180 °C for 10-14 h. The structures, compositions, and morphologies of the as-synthesized products are derived from X-ray power diffraction pattern, X-ray photoelectron spectra, and field emission scanning electronic microscope. Meanwhile, the optical properties of the micro-sized Sb₂O₃ octahedra are studied by their photoluminescene spectroscopy and Raman spectrum. Furthermore, the possible growth mechanism of the micro-metered Sb₂O₃ octahedra is discussed on the basis of a series of supplementary experiments. And it has been found that PEG-1000, sodium tartrate, the reaction temperature, and the reaction time have considerable effects on the final morphology of Sb₂O₃, while the pH value has an influence on the formation of the Sb₂O₃ crystals.     

Energetic preferences for alpha,beta versus beta,gamma unsaturation

Density functional theory has been applied at the B3LYP/6-311+G(d,p)//B3LYP/6-31G(d) level to examine the energetics of alpha,beta- versus beta,gamma-unsaturation for some common organic functional groups. Specifically, the relative stabilities of allyl-X (H2C=CHCH2X) and 1-propenyl-X (H3CCH=CHX) isomers have been computed for X = methyl, vinyl, phenyl, formyl, acetyl, methoxy, methylthio, methylsulfinyl, methylsulfonyl, sulfamoyl, and methoxysulfonyl, and the results are compared to available experimental data. The intrinsic preference of 3 kcal/mol for the 1-propenyl isomer when X = CH3 is exceeded by 2-4 kcal/mol for first-row conjugating groups, but it is not met for the sulfur-containing groups. In particular, alpha,beta-unsaturation is favored by less than 1 kcal/mol for the sulfone and sulfonamide analogues, while it is preferred by 8 kcal/mol for the vinyl-substituted case. Detailed structural results and torsional energy profiles are also reported.