An integrated chip for immunofluorescence and its application to analyze lysosomal storage disorders

Immunofluorescence (IF) is a common method to observe protein distribution and localization at the single-cell level through wide-field fluorescence or confocal microscopy. Conventional protocol for IF staining of cells typically requires a large amount of reagents, especially antibodies, and noticeable investment in both labor and time. Microfluidic technologies provide a cost-effective alternative: it can evaluate and optimize experimental conditions, and perform automatic and high-throughput IF staining on-chip. We employed this method to analyze lysosomal storage disorders (LSDs) based on the expression and morphological distribution of LAMP1 and LC3 in starving cells. With pneumatic valves integrated on-chip, the parallel staining process can be completed within a few hours. The total consumption of each antibody solution for the whole experiment is merely 0.3 μL. This device provides a promising tool for automated high-throughput molecular imaging at cell level that can be applied for diagnostic analysis.     

Furanose ring conformations in a 1′-alkynyl C-nucleoside and the dinucleotide

A large-scale synthesis was carried out for alkynyl C-nucleotide oligomers in order to clarify the structural details of the artificial DNA. A liquid-phase synthesis by means of phosphoramidite methodology enabled us to handle ～0.1 g of the DNA oligomers possessing a pseudouracil derivative (T*) as a non-natural nucleobase. ¹H NMR measurements in aqueous media were carried out for the oligomers, succeeded in the accurate assignments of the protons accompanying with determination of the coupling constants (J values). These J values revealed that average conformation of the alkynylribose rings in the DNA was substantially biased toward the S-type conformers (²T₁/E₁/^OT₁). X-ray crystal analysis of the non-natural nucleoside also supported the S-type conformation (²E/²T₁) as seen in natural B-DNA.     

A Novel Method for the Production of Glycosphingolipids

Neolacto‐series ganglioside sialylparagloboside (SPG) is a ganglioside species present in various human tissues, and used in many important studies. In this study, four ganglioside analogs, GM3, GD3, SPG, and NeuAc‐Gal‐GlcNAc‐Gal‐GlcNAc‐Gal‐Glc‐Cer, were synthesized by the saccharide‐primer method using MDCK cells and β‐lactoside primer with different aglycons. As compared to former methods for producing SPG, the primer method was rapid and convenient. Moreover, the yield of SPG was much higher than that obtained by former methods. The production of gangliosides with an azido group in the aglycon moiety was also achieved by using MDCK cells.     

Concise and stereoselective synthesis of 2,5- and 2,4-disubstituted thiazole amino acid subunits for synthesizing thiazole-containing peptides

A concise, highly stereoselective synthesis of 2,4- and 2,5-disubstituted thiazole amino acids was developed. These are important building blocks for various biologically active thiazole-containing natural peptides and their regioisomeric analogues. The fundamental reactions are diastereoselective addition of (4- or 5-bromothiazol-2-yl)lithium to N-tert-butanesulfinyl imine with subsequent Pd-catalyzed phenoxycarbonylation.     

Effect of sintering temperature of Ce<Superscript>3+</Superscript>-doped Lu<Subscript>3</Subscript>Al<Subscript>5</Subscript>O<Subscript>12</Subscript> phosphors on light emission and properties of crystal structure for white-light-emitting diodes

The effect of the sintering temperature of Ce³⁺-doped Lu₃Al₅O₁₂ (Ce-LuAG) phosphors on the emission and properties of the crystal structure was studied. A cathodoluminescence peak at 317 nm, which was assigned to lattice defects, was exhibited in addition to emission peaks at 508 and 540 nm for the Ce-LuAG phosphors. The intensities of the 317 nm emission peak for the phosphors with mean particle diameters of 5.0 and 10.0 µm formed at a low sintering temperature of 1430 °C were higher than those for the phosphors with mean particle diameters of 18.0 and 20.5 µm formed at a high sintering temperature of 1550 °C. In contrast, the electroluminescence spectra for fabricated white-light-emitting diodes (LEDs) using the phosphors revealed that the intensity of the peak at 540 nm was strong for the mean particle diameters of 18.0 and 20.5 µm. The intensity of the 540 nm peak, which is attributed to the 4f→5d transition of the Ce³⁺ activator, showed a dependence on the sintering temperature. The relationship between the optical properties and the lattice defects is discussed.     

常见消化病微量元素临床与实验研究

综述了微量元素与消化病之间的关系，包括：元素Cu，Zn，Fe,Mo，Cr，Mn,Ca，Se,Bi，Al,Mg与慢性胃病、消化性溃疡、食道癌、胃癌、肠道疾病的关系．     

Beckmann Fragmentation and Rearrangement. Part VII. Fragmentation and cyclization of α-methylthio-ketoximes. Fragmentation reactions no. 27

α-Methylthio-propiophenone anti-oxime p-toluenesulfonate (tosylate) ( 12b ) fragments quantitatively in 80% ethanol yielding benzonitrile and a methylidenesulfonium ion 15 . The syn-isomer, however, undergoes a Beckmann rearrangement. The fragmentation of α-methylthio-isobutyropher one anti-oxime tosylate ( 13b ) is accompanied by cyclization to the 1, 2-thiazetin-1-ium ion 27 , which is hydrolyzed via the sulfimine 29 to the keto sulfide 20 and the keto sulfoxide 30 . A comparison of the rates of the α-alkylthio anti-ketoxime tosylates 12b and 13b and of the homomorphous oxime tosylates 16b and 17b shows that fragmentation and cyclization are strongly assisted by the sulfur atom. Whereas both the anti- and syn-isomers of α-amino ketoxime derivatives fragment quantitatively, only the anti-isomers of α-alkylthio ketoxime derivatives undergo facile fragmentation.     

Preparation of poly(methyl methacrylate) films containing silica particle array structure from colloidal crystals

The incorporation of monodisperse, polymer-modified silica into poly(methyl metharylate) to prepare polymer films containing particle array structure was investigated. The preparation was carried out by a two-step radical polymerization for gelation and solidification. The colloidal crystallization of poly(methyl metharylate)-modified silica, in 78 nm size, in acetonitrile and successive copolymerization of methyl methacrylate and 1,2-dimethacryloylethane by UV light irradiation gave the polymer gel containing the colloidal crystal structure. The exchange of acetonitrile in the gel with methyl methacrylate and further photo-radical polymerization gave the durable polymer film composed of silica particle array.     

Basic study on the determination of total boron by conversion to tetrafluoroborate ion (BF4) followed by ion chromatography

The basic study on the determination of tetrafluoroborate ion (BF₄⁻) by ion chromatography, and total boron by conversion of boric acid to BF₄⁻ followed by ion chromatography of BF₄⁻ has been carried out. The results of thermodynamic calculations for the system of boric acid (H₃BO₃)-F⁻-H⁺ showed that the mole fraction of BF₄⁻ was higher than 99% at pH lower than 3.5 and 4.5 when the total free fluoride concentration (2[H₂F₂] + 2[HF₂⁻] + [HF] + [F⁻]) was as high as 0.1 and 1.0 M, respectively. The fraction of BF₄⁻ increased with increasing total free fluoride concentration. BF₄⁻ fraction values were higher than 99% at pH 0.75 and at total free fluoride concentration of 0.05 M or higher. BF₄⁻ was hardly formed at pH > 7 even when the total free fluoride concentration was as high as 1.0 M. According to the experimental results, the fraction of BF₄⁻ at pH 0.7-0.8 was 51.2, 95.6 and 96.7% when the total fluoride concentration (2[H₂F₂] + 2[HF₂⁻] + [HF] + [F⁻] + 3[BF₃OH⁻] + 4[BF₄⁻]) was 0.2, 1.0 and 3.3 M, respectively. The formation reaction of BF₄⁻ from boric acid reached an equilibrium state within 20 min regardless of reaction temperature, in the range of 20-50 °C, when the total boron and total fluoride concentrations were 66.7 mM and 1.0 M, respectively. Although BF₄⁻ was formed only under acidic conditions, BF₄⁻, once formed, was very stable under alkaline conditions at least for several hours. We have concluded that BF₄⁻ could be analyzed by ion chromatography using sodium hydroxide solution as an eluent because BF₄⁻ was stable under chromatographic conditions. BF₄⁻ solution prepared from boric acid could be used as a standard solution in the ion chromatographic analysis of BF₄⁻ instead of the sodium tetrafluoroborate (NaBF₄) reagent available commercially, if a discrepancy of about 4-5% was allowed.     

Self-healing and shape memory functions exhibited by supramolecular liquid-crystalline networks formed by combination of hydrogen bonding interactions and coordination bonding

We here report a new approach to develop self-healing shape memory supramolecular liquid-crystalline (LC) networks through self-assembly of molecular building blocks via combination of hydrogen bonding and coordination bonding. We have designed and synthesized supramolecular LC polymers and networks based on the complexation of a forklike mesogenic ligand with Ag⁺ ions and carboxylic acids. Unidirectionally aligned fibers and free-standing films forming layered LC nanostructures have been obtained for the supramolecular LC networks. We have found that hybrid supramolecular LC networks formed through metal–ligand interactions and hydrogen bonding exhibit both self-healing properties and shape memory functions, while hydrogen-bonded LC networks only show self-healing properties. The combination of hydrogen bonds and metal–ligand interactions allows the tuning of intermolecular interactions and self-assembled structures, leading to the formation of the dynamic supramolecular LC materials. The new material design presented here has potential for the development of smart LC materials and functional LC membranes with tunable responsiveness.

New supramolecular hybrid liquid-crystalline networks exhibiting self-healing and shape memory properties are developed by self-assembly of small components through hydrogen bonding interactions and coordination bonding.