高分子负载加氢催化剂中钯流失的研究——Ⅰ.高分子载体的影响

高分子催化剂由于同时具有多相催化剂和均相催化剂的优点,已引起了广泛的重视.然而表面活性组份贵金属的流失直接影响了此类高活性催化剂的推广应用.作者合成了不同载体的几类负载钯催化剂,探讨其在1,5,9-环十二碳三烯的选择加氢反应过程中钯的流失规律.从改变高分子配位体入手,通过调整聚合物载体的物理性能、配位原     

有机链状分子的定域分子轨道的研究

利用Foster-Boys定域化程序和STO-3G ab initio方法,对含有C、H、O、N原子的100多个有机链状分子进行了研究,得到定域分子轨道能量及其相互作用参数。应用这些参数和定域分子轨道模型,对于众多的含有C、H、O、N原子的有机链状分子,可得到相应的正则分子轨道能量及其与定域分子轨道的关系。以此预测它们的电离能,结果与实验值符合较好。     

Materials and Methods

Materials and Methods Synthesis of thionyl chloride-activated succinamidopropyl-glass beads     

Determination of sulfur dioxide in vitriol plant wastewater by using a polyNiMe4TAA electrochemically modified Pt microelectrode

A Pt microelectrode modified with nickel(II) polytetramethyldibenzo[b,i]tetraaza[14]annulene was prepared by electropolymerization of nickel(II) tetramethyldibenzo[b,i]tetraaza[14]annulene monomers and applied to determine sulfur dioxide in vitriol plant wastewater. For determination of SO2 with this electrochemically modified Pt microelectrode, the linear range was from 9.6 x 10(-6) to 2.4 x 10(-4) mol L-1, the sensitivity was 1.8 x 10(-4) A L mol-1, the detection limit was calculated to be 4.8 x 10(-6) mol L-1 (S/N = 3), the response time was less than 20 s and the relative standard deviation was found to be 2.1% on analyzing 4.8 x 10(-5) mol L-1 SO2 solution repeatedly (n = 7). These results demonstrated good accuracy compared with those obtained by the conventional iodimetric method.     

Simultaneous determination of p-hydroxybenzaldehyde, p-hydroxybenzyl alcohol, 4-(beta-D-glucopyranosyloxy)-benzyl alcohol, and sugars in Gastrodia elata blume measured as their acetylated derivatives by GC-MS

A method for the simultaneous separation and determination of the active constituents and three sugars in the roots of Gastrodia elata Blume (GE), which is used as a famous Chinese traditional herbal medicine, by gas chromatography-mass spectrometry is established. The samples are acetylated with pyridine-acetic anhydride. The contents of 4-hydroxybenzaldehyde, 4-hydroxybenzyl alcohol (HA), fructose, glucose, 4-(beta-D-glucopyranosyloxy)-benzyl alcohol (GA), and sucrose in GE are 0.004%, 0.03%, 1.36%, 1.12%, 1.97%, and 4.25%, respectively, and the detection limits are 1.5, 3.0, 11.0, 5.0, 33.0, and 35.0 pg, respectively. The contents of HA and GA in the urine and brain of a mouse are also determined. This method is simple, reliable, and quick for the simultaneous determination of the active constituents and sugars in GE.     

The uranium-Xylidyl Blue I complex and its application in linear sweep polarography

The linear sweep polarographic wave of the uranium-Xylidyl Blue I complex in ethylenediamine-1,10-phenanthroline-hydrochloric acid medium has been studied. The complex, corresponding to UO(2)(XBI)(2-)(2) with log beta' = 9.09 (by polarography), 8.81 (by spectrophotometry), is strongly adsorbed on the surface of the mercury electrode. The polarographic wave is attributed to the reduction of Xylidyl Blue I in the complex. The method is very sensitive with a detection limit of 3 x 10(-8)M. The wave height is proportional to the concentration of uranium over the range 8 x 10(-8)-7 x 10(-6)M. Solvent extraction is used to separate possible interferences. The recommended procedure has been applied to the determination of trace amounts of uranium in ores.     

Preparation and application of selenite ion selective electrode

A new selenite ion selective electrode using 4,6-dibromopiaselenole as active material, PVC as membrane matrix and dibutyl phthalate as plasticizer has been developed. An analytically useful potential change occurs from about 10(-6)-10(-1)M Se(IV), and the slope of the linear portion is -23.6 mV/10-fold change in Se(IV) concentration at a temperature of 21 degrees . The electrode shows fairly good selectivity for selenite ion over other anions and has been used for the successful determination of total selenium in human hair.     

Relationship between the molybdenum phases and the conversion of n-butane over Mo/HZSM-5

The conversion of n-C₄H₁₀ was undertaken on MoO₃/HZSM-5 catalyst at 773–973 K and the phases of molybdenum species were detected by XRD. The XRD results show that bulk MoO₃ on HZSM-5 can be readily reduced by n-C₄H₁₀ to MoO₂ at 773 K and MoO₂ can be gradually carburized to molybdenum carbide above 813 K. The molybdenum carbide formed from the carburization of MoO₂ with n-C₄H₁₀ below 893 K is -MoC_1−x with fcc-structure, while hcp-molybdenum carbide formed above 933 K. During the evolution of MoO₃ to MoO₂ (>773 K) or the carburization of MoO₂ to molybdenum carbide (>813 K), deep oxidation, cracking and coke deposition are serious, in particular at higher reaction temperatures, these lead to the poor selectivity to aromatics. Aromatization of n-C₄H₁₀ can proceed catalytically on both Mo₂C/HZSM-5 and MoO₂/HZSM-5, the distribution of the products for the two catalysts is similar below 813 K, but the activity for Mo₂C/HZSM-5 is much higher than that for MoO₂/HZSM-5.     

Matrix Effects and Behaviors of Elements in Oxalic Acid Medium by Inductively Coupled Plasma Mass Spectrometry

Because of its high sensitivity, wide dynamic range and relative freedom from interferences, inductively coupled plasma mass spectrometry (ICP-MS) has been developed for the determination of trace and ultra-trace levels of elements in various fields1. Due…     

Fluoro-substituted DPP-bisthiophene conjugated polymer with azides in the side chains as ambipolar semiconductor and photoresist

Photoresists are essential for the fabrication of flexible electronics through all-photolithographic processes. Single component semiconducting photoresist exhibits both semiconducting and photo-patterning properties, and as a result, the device fabrication process can be simplified. However, the design of semiconducting polymeric photoresist with ambipolar semiconducting property remains challenging. In this paper, we report a single component semiconducting photoresist (PFDPPF4T-N₃) by incorporating azide groups and noncovalent conformation locks into the side alkyl chains and conjugated backbones of a diketopyrrolopyrrole-based conjugated polymer, respectively. The results reveal that PFDPP4FT-N₃ exhibits ambipolar semiconducting property with hole and electron mobilities up to 1.12 and 1.17 cm² V^?1 s^?1, respectively. Moreover, field effect transistors with the individual photo-patterned thin films of PFDPPF4T-N₃ also show ambipolar semiconducting behavior with hole and electron mobilities up to 0.66 and 0.80 cm² V^?1 s^?1, respectively. These results offer a simple yet effective design strategy for high-performance single component semiconducting photoresists, which hold great potential for flexible electronics processed by all photolithography.