脊加载曲折波导行波管注波互作用的线性理论研究

提出了一类新型毫米波大功率微波器件——脊加载曲折波导行波管,推导出了引入电子注后的"热"色散方程.通过数值求解此方程,研究了加脊尺寸和电子注参数对小信号增益影响.计算结果表明:通过适当的尺寸设计和工作参数的选择,此结构在Kα波段具有18.51%的3 dB增益带宽和1.15 dB/周期的增益;相比于常规曲折波导结构,脊加载结构在保证一定带宽的情况下,具有更高的增益和电子效率;为了进一步提高增益,可以适当增加脊宽度和高度,也可在一定范围内增加电子注电流. 关键词： 毫米波 曲折波导 脊加载 小信号增益     

噪声对滑动移除近似熵的影响

受外强迫和仪器本身的测量误差等因素的影响, 观测数据中经常包含噪声和扰动等一些虚假的信息. 针对这一问题, 本文研究了各种不同噪声对滑动移除近似熵的影响. 研究结果表明, 滑动移除近似熵的检测结果受尖峰噪声和高斯白噪声的影响较小, 意味着其具有很强的抗噪能力, 这为该方法在实际观测资料中的广泛应用提供了坚实的实验基础.     

微颗粒样品X射线定量分析Monte Carlo模拟计算软件

基于作者前文[1,2]的物理模型和计算方法,编制了适用于多元微颗粒样品x射线定量分析的Monte Carlo程序软件,给出了对颗粒中电子散射,x射线激发、吸收和荧光效应等复杂物理过程进行严格计算的一系列公式,程序中建立了数据文件,具有较强的自动处理数据功能,本程序还适用于平厚块样品及薄膜样品的定量分析计算。     

X射线光子在固体中空间密度分布的蒙特卡罗模拟计算软件

基于作者发展的物理模型和计算方法,编制了计算固体中X射线光子的空间密度分布的软件。该程序可模拟keV能量的电子束在固体中的散射过程和X射线光子的激发,定量给出X光光子的空间密度分布和包含不同比例光子数的空间范围。这对电子显微学的定量研究是很有意义的。     

闭壳层金掺杂钛氧团簇阴离子解离氢分子研究

Dissociation of molecular hydrogen (H₂) is extensively studied to understand the mechanism of hydrogenation reactions. In this study, H₂ dissociation by Au₁-doped closed-shell titanium oxide cluster anions AuTi₃O₇^- and AuTi₃O₈^- has been identified by mass spectrometry and quantum chemistry calculations. The clusters were generated by laser ablation and massselected to react with H₂ in an ion trap reactor. In the reaction of AuTi₃O₈^- with H₂, the ion pair Au⁺-O₂^2- rather than Au⁺-O^2- is the active site to promote H₂ dissociation. This finding is in contrast with the previous result that the lattice oxygen is usually the reactive oxygen species in H₂ dissociation. The higher reactivity of the peroxide species is further supported by frontier molecular orbital analysis. This study provides new insights into gold catalysis involving H₂ activation and dissociation.     

The isotopes259106,260106, and261106

In irradiations of²⁰⁷Pb and²⁰⁸Pb, respectively, with⁵⁴Cr theα-decay of the isotopes²⁵⁹106,²⁶⁰106, and²⁶¹106 could be observed for the first time. For²⁶⁰106 a spontaneous fission branch of (50 _?20 ⁺³⁰ )% was observed. The isotopes were identified by genetic relationships of α-decay after separation in-flight with the velocity filter SHIP and implantation into a position-sensitive silicon surface-barrier detector. The measured partial fission halflife of the doubly even isotope²⁶⁰106 of (7.2 _?2.7 ^+4.8 )ms exceeds the predicted values by at least a factor of 40. This result could be explained by the high shell corrections of the ground state mass, derived from the measured α-decay energies. The experimental results show evidence for an island of purely shell stabilized nuclei in the region of deformed isotopes beyond the actinides.     

强磁场中氢原子的能级结构

发展了一套简单高效的非微扰理论方法研究强磁场中的原子能级结构.作为例子,给出了磁场强度从0到1000个原子单位,氢原子基态和低激发态的结合能以及四极矩等重要原子能级结构参数.结果表明:相对于其他的高精度计算方法,该方法不仅能计算出高精度的能级位置而且可方便给出精确的电子波函数.此外,该法还具有很强的普适性,可直接推广到原子与任意方向的交叉电磁场相互作用的研究. 关键词： 强磁场 CWDVR谱方法 氢原子能级结构 四极矩     

Performance optimization analysis of a thermoelectric refrigerator with two resonances

Based on electron transport theory,the performance of k x and k r filtered thermoelectric refrigerators with two resonances are studied in this paper.The performance characteristic curves between the cooling rate and the coefficient of performance are plotted by numerical calculation.It is shown that the maximum cooling rate of the thermoelectric refrigerator with two resonances increases but the maximum coefficient of performance decreases compared with those with one resonance.No matter which resonance mechanism is used(k x or k r filtered),the cooling rate and the performance coefficient of the k r filtered refrigerator are much better than those of the k x filtered one.     

双贴合无光焦度校正板在双球面镜次镜后的系统的像差特性研究

讨论了双贴合无光焦度校正板放在次镜后的双反射球面系统.根据像差理论分析了消像差的条件,研究了主镜的相对孔径变化、校正板在次镜后的位置变化以及无光焦度校正板的正负透镜的不同组合形式对系统高级残余像差的影响.结果表明：当主镜的相对孔径增加或校正板靠近次镜时,系统的残余像差增加;无论校正板的第一个透镜是正透镜还是负透镜,系统在某一光焦度处残余像差最小,并且靠近次镜的透镜最好采用负透镜.     

金刚石窗口冷却Yb3+∶YAG DPSSL设计

针对高功率二极管重复率抽运的V型非稳腔Yb3+∶YAG激光头，提出了利用金刚石窗口冷却和直接水冷相结合的复合冷却设计.在YAG片的抽运面进行直接水冷，同时在激光提取面利用金刚石窗口冷却介质.金刚石优异的导热性能不仅能够有效地冷却激光介质，还能消除横向的温度梯度，解决了高功率激光器冷却和高功率抽运的矛盾.模拟结果表明对掺杂10 at %厚度为1.6 mm的Yb3+∶YAG片在抽运功率密度为20 kW/cm2，重复频率为10 Hz的条件下，要将最高温度控制在可接受的范围内（比如320 K），周围冷却水的对流换热系数约为4000 W/m2K.