Relative efficiency calibration of Ge(Li) detector in low energy region

The relative gamma-ray intensities in the energy region between 122 and 411 keV in the decay of¹⁵²Eu were measured by using a Ge(Li) detector. Its efficiency calibration was carried out with the radioactive sources of²⁴¹Am,⁵⁷Co,²⁰³Hg,¹³⁷Cs,¹³³Ba,⁷⁵Se,¹⁶⁹Yb and¹⁹²Ir.     

Synthesis and anti-HIV-1 activity of novel 10-thiaisoalloxazines,a structural analog of C-5 and/or C-6 substituted pyrimidine acyclonucleoside

A series of novel 10-thiaisoalloxazine derivatives bearing an alkoxymethyl or benzyloxymethyl moiety at the N-1 position has been synthesized through the bromination of 1-substituted-5-hydroxyuracils and subsequent condensation with aminobenzenethiol in a one-pot reaction. Contrary to the previous report, the formation of intermediary 5,6-diethoxy-5-hydroxy-5,6-dihydrouracil seems to be not the necessary factor for the formation of the thiaisoalloxazines, since the reaction proceeds in tetrahydrofuran (THF) or acetonitrile far more smoothly than in ethanol. The anti-human immunodeficiency virus (HIV)-1 activity of the resulted thiaisoalloxazine derivatives was evaluated in lymphocyte cells based on the inhibitory activity against the viral-induced cytopathic activity. Among the derivatives, compounds 6, 7, and 8 bearing an alkoxymethyl moiety at the N-1 position exhibited modest inhibitory activity towards the cytotopathic effect of HIV-1.     

Mechanism of gold adsorption by persimmon tannin gel.

Gold adsorption by persimmon tannin (PT) gel from a solution containing hydrogen tetrachloroaurate(III) was examined. A flow-rate examination in a column system indicated the reduction of Au(III) ion to Au(0). XRD patterns clarified the existence of Au(0) on the gel which adsorbed gold. The gel could also adsorb colloidal Au(0) prepared independently. A model consisting of ligand exchange, Au(III) reduction to Au(0), and resulting Au(0) adsorption by PT gel was presented for the gold adsorption mechanism.     

Fluorogenic probes for detecting deacylase and demethylase activity towards post-translationally-modified lysine residues

Reversible enzymatic post-translational modification of the ε-amino groups of lysine residues (e.g. N-acylation reactions) plays an important role in regulating the cellular activities of numerous proteins. This study describes how enzyme catalyzed N-deprotection of lysine residues of non-fluorescent peptide-coumarin probes can be used to generate N-deprotected peptides that undergo spontaneous O- to N-ester transfer reactions (uncatalyzed) to generate a highly fluorescent N-carbamoyl peptide. This enables detection of enzyme catalyzed N-deacetylation, N-demalonylation, N-desuccinylation and N-demethylation reactions activities towards the N-modified lysine residues of these probes using simple ‘turn on’ fluorescent assays.

We developed “turn-on” fluorescent probes that detect enzymatic lysine deacylation and demethylation critical for epigenetic and other cellular phenomena, using intramolecular O- to N-ester transfer reactions.     

High throughput continuous titration based on a flow ratiometry controlled with feedback-based variable triangular waves and subsequent fixed triangular waves

We propose a new approach for high-throughput continuous titration based on a flow ratiometry. The method was applied to potentiometric titrations of acids and bases. A base solution, the flow rate F_B of which was varied in response to controller output voltage V_c, was merged with an acid solution under constant total (acid + base) flow rate. Downstream, the pH of the mixed solution was measured with a flow-through glass electrode. Initially, V_c, and thus F_B was increased linearly. At the instant the equivalence point (EP) was sensed, the ramp direction of V_c was reversed from upward to downward. The direction was reversed to upward when EP was sensed again. Such the feedback-based operation gives a triangular waveform of V_c, because there is a delay corresponding mainly to the transit time of merged solutions to reach the sensor. The value of V_c that gives EP composition, V_E, was estimated by averaging the most recent maximum and minimum values of V_c. Next, fixed triangular waves of V_c was used to control F_B. The amplitude and the scan rate of the waves were fixed narrower and faster, respectively, than those in the feedback-based operation in order to improve the throughput rate. The EP can be located as long as the scan range covers V_E. These automated processes limited the titration to just the narrow range around EP, and thus realized extremely high throughput rate of maximally 17.6 titrations per minute (=3.4 s per titration) at R.S.D. = 0.35%.     

Simultaneous ultramicrodetermination of heterogeneous halogens in organic compounds

The simultaneous ultramicrodetermination of heterogeneous halogens in organic compounds was carried out by the potentiometric titration with 0.002 M silver nitrate after the sample was decomposed by the flask combustion method. In examination of the titration, it was found that clear potential break at the end point was obtained by controlling the delivery speed of the titrant at 0.2 ml/min or slower and the temperature of the solution to be titrated at ca. 10 °C when chloride ion is present. The error due to coprecipitation during the titration and the effect of the mole ratio of heterogeneous halide ions in the sample solution was examined and discussed. The analysis of organic halogen compounds resulted in an error of within 0.4% and standard deviation of less than 0.25%.     

Surface structures of adsorption layers of sodium hyaluronate and bovine serum albumin complexes on poly(γ-methyl-l-glutamate) film and their surface properties

Two-dimensional structures and characteristics of the complexes between sodium hyaluronate (NaHA) and bovine serum albumin (BSA) were studied by using a quartz crystal microbalance method and an atomic force microscope (AFM). NaHA did not adsorb on poly(-methyl-l-glutamate) (PMLG) film. On the other hand, the complexes adsorbed on it and the adsorption behaviors were found to be Langmuir types. With increasing weight ratio of BSA to NaHA, W _BSA, the adsorption constants K decreased and the saturated adsorption masses increased. The adsorbed complexes were spherical particles and at saturated adsorption states they covered compactly on the PMLG film. The mean diameters d _AFM estimated from the topographic images decreased from 70 to 54 nm with increasing W _BSA. The adhesion force F _ad and the frictional force F _f between the complex layers and the AFM tip were obtained by using the contact mode of the AFM. With increasing W _BSA, the values of F _ad decreased and the values of F _f increased. Compared with the frictional coefficient of the NaHA adsorption layer on the BSA monolayer, the values for the NaHA–BSA complex layer were found to be much higher.     

Fluorination of 2-alkyl-substituted oxanes. The synthesis and purification of perfluoro(2-alkyl-substituted oxane)s

Five kinds of 2-alkyl-substituted oxanes like 2-ethyloxane, 2-n-propyloxane, 2-iso-propyloxane, 2-n-butyloxane and 2-n-amyloxane were fluorinated electrochemically to give the corresponding perfluoro(2-alkyloxane)s. The perfluoro(2-alkyloxane)s were obtained in good yields from these starting materials together with isomeric perfluoro(2-alkyloxolane)s, perfluoro(2-alkyl-5-methyloxolane)s and perfluoro(dialkyl ether)s. The purification of the perfluoro(2-alkyloxane)s which contained small amounts of isomeric perfluoro(2-alkyloxolane)s was successfully achieved by recovering the former unreacted after treating these mixture with anhydrous aluminum chloride at 150 /sR 160 °C during /sR 48 hrs in order to convert the latter into the easy-separable perfluoro(2,5,5- trichloro-2-alkyloxolane)s. Small quantities of new perfluoro(5,5-dichloroalkanoyl chloride)s were also among the chlorination products. The spectroscopic data as well as the physical properties of these new fluorination products, and perfluoro(2,5,5-trichloro-2-alkyloxolane)s and perfluoro(5,5-dichloroalkanoyl chloride)s are presented.     

Sub-Doppler rotationally resolved spectroscopy of lower vibronic bands of benzene with Zeeman effects

Sub-Doppler high-resolution excitation spectra and the Zeeman effects of the 6(0)(1), 1(0)(1)6(0)(1), and 1(0)(2)6(0)(1) bands of the S1(1)B2u<--S(0)(1)A1g transition of benzene were measured by crossing laser beam perpendicular to a collimated molecular beam. 1593 rotational lines of the 1(0) (1)6(0) (1) band and 928 lines of the 1(0)(2)6(0)(1) band were assigned, and the molecular constants of the excited states were determined. Energy shifts were observed for the S1(1)B2u(v1=1,v6=1,J,Kl=-11) levels, and those were identified as originating from a perpendicular Coriolis interaction. Many energy shifts were observed for the S1(1)B2u(v1=2,v6=1,J,Kl) levels. The Zeeman splitting of a given J level was observed to increase with K and reach the maximum at K=J, which demonstrates that the magnetic moment lies perpendicular to the molecular plane. The Zeeman splittings of the K=J levels were observed to increase linearly with J. From the analysis, the magnetic moment is shown to be originating mostly from mixing of the S1(1)B2u and S2(1)B1u states by the J-L coupling (electronic Coriolis interaction). The number of perturbations was observed to increase as the excess energy increases, and all the perturbing levels were found to be a singlet state from the Zeeman spectra.