Anomalous Impact of Surface Wettability on Leidenfrost Effect at Nanoscale

Leidenfrost effect is a common and important phenomenon which has many applications,however there is a limited body of knowledge about the Leidenfrost effect at the nanoscale regime.We investigate the impact of substrate wettability on Leidenfrost point temperature(LPT) of nanoscale water film via molecular dynamics simulations,and reveal a new mechanism different from that at the macroscale.In the molecular dynamics simulations,a method of monitoring density change at different heating rates is proposed to obtain accurate LPT under different surface wettability.The results show that LPT decreases firstly and then increases with the surface wettability at the nanoscale,which is different from the monotonous increasing trend at the macroscale.The mechanism is elucidated by analyzing the competitive effect of adhesion force and interfacial thermal resistance,as well as different contributions of gravity on LPT at the nanoscale and macroscale.The investigations can deepen the understanding of Leidenfrost effect at the nanoscale regime and also facilitate to guide the applications of heat transfer and flow transport.     

Microtubules of polyaniline doped with HCl and HBF4

Microtubules of polyaniline (PANI) doped with HCl, HBF₄, and β-naphthalene sulfonic acid (NSA) were synthesized by an improved in situ doping polymerization method. Ultraviolet-visible spectra, scanning electron microscopy, ESR, and X-ray diffraction characterized the molecular structure of the resulting PANI microtubules. These microtubules had a diameter of 1 ∼ 10 μm and a conductivity at room temperature of 0.2 ∼ 3.5 S/cm, depending on the molecular structure and concentration of the dopant. The degree of crystallinity of the PANI microtubules was enhanced by increasing the molecular size of the dopant; that is, the order PANI-NSA > PANI-HBF₄ > PANI-HCl was observed in the crystallinity of the microtubules. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4605–4609, 1999     

Ni/Al2O3催化剂上甲烷部分氧化制合成气反应积炭的研究

合成气制备;Ni/Al2O3催化剂上甲烷部分氧化制合成气反应积炭的研究     

15-甲基-双环[10,3,0]十五碳-1(12)-烯-13-酮的晶体结构及分子稳定构象

15-甲基-双环[10,3,0]十五碳-1(12)-烯-13-酮的单晶属空间群P2_1/n,晶胞参数:a=0.4838(1)nm,b=1.3949(2)nm,c=2.1645(4)nm,β=92.07(1)°,Z=4.其中平面五员环呈刚性。另一个含烯十二员环的实际构象与分子力学计算的最稳定构象一致。     

Optical Properties of Fullerenated Poly(epoxy propyl carbazole)

Sincethedevelopmentofmethodslformassproductionoffullerenes,therehasbeengTeatinterestinit-Manyresearchgroups'havepaidgreatattentiontothefiJllerene-dopedpolymersinceWang'discoveredinl992thatfullerene-dopedPVKhasanapparentlyincreasingphotoconductivity.WehavereportedthechendcalattachmentofCcocagestothecarbazolegroupsonpoly(epoxypropylcarbazole)(PEPC)chainsbyFriedel-Craftstypereaction'.Here,theopticalpropertiesoffullerenatedPEPCwereinvestigated,whichwillshowitsgoodphotoconductivepropeFtiesbe…     

Synthesis, Characterization and Catalysis of New Pillared Anionic Clays by [GaW_(11)O_(39)M(H_2O)]~(7-)(M=Mn~(2 ),Co~(2 ) or Ni~(2 ))

ＩｎｔｒｏｄｕｃｔｉｏｎＡｎｉｏｎｉｃｃｌａｙｓ（ｌａｙｅｒｅｄｄｏｕｂｌｅｈｙｄｒｏｘｉｄｅｓ）ａｒｅｉｍｐｏｒｔａｎｔｌａｙｅｒｅｄｍａｔｅｒｉａｌｓ．Ｔｈｅｇｅｎｅｒａｌｆｏｒｍｕｌａｉｓ［Ｍ２＋（１－ｘ）Ｍｘ３＋（ＯＨ）２］ｘ＋Ａｎ－ｘ／ｎｍ...     

Cooperatively assembled liquid crystals enable temperature-controlled Förster resonance energy transfer

Balancing the rigidity of a π-conjugated structure for strong emission and the flexibility of liquid crystals for self-assembly is the key to realizing highly emissive liquid crystals (HELCs). Here we show that (1) integrating organization-induced emission into dual molecular cooperatively-assembled liquid crystals, (2) amplifying mesogens, and (3) elongating the spacer linking the emitter and the mesogen create advanced materials with desired thermal–optical properties. Impressively, assembling the fluorescent acceptor Nile red into its host donor designed according to the aforementioned strategies results in a temperature-controlled Förster resonance energy transfer (FRET) system. Indeed, FRET exhibits strong S-curve dependence as temperature sweeps through the liquid crystal phase transformation. Such thermochromic materials, suitable for dynamic thermo-optical sensing and modulation, are anticipated to unlock new and smart approaches for controlling and directing light in stimuli-responsive devices.

A temperature-sensitive Förster resonance energy transfer system was constructed using a highly emissive liquid crystal co-assembled with Nile red, enabling thermo-optical modulation for controlling and directing light in stimuli-responsive devices.     

Probing phosphate ion via the europium(III)-modulated fluorescence of gold nanoclusters

Fluorescent gold nanoclusters (Au-NCs) were synthesized by a one-pot method using 11-mercaptoundecanoic acid as a reducing and capping reagent. It is found that the red fluorescence of the Au-NCs is quenched by the introduction of Eu(III) at pH 7.0, but that fluorescence is restored on addition of phosphate. The Au-NCs were investigated by transmission electron microscopy and fluorescence photographs. The effect of pH on fluorescence was studied in the range from pH 6 to 10 and is found to be strong. Based on these findings, we have developed an assay for phosphate. Ions such as citrate, Fe(CN)₆ ^3?, SO₄ ^2?, S₂O₈ ^2?, Cl^?, HS^?, Br^?, AcO^?, NO₂ ^?, SCN^?, ClO₄ ^?, HCO₃ ^?, NO₃ ^?, Cd²⁺, Ba²⁺, Zn²⁺, Mg²⁺, and glutamate do not interfere, but ascorbate and Fe³⁺ can quench Au-NCs fluorescence. The fluorescent nanocluster probe responds to phosphate in the range from 0.18 to 250 μM, and the detection limit is 180 nM. The probe also responds to pyrophosphate and ATP. Figure

Off/on fluorescence sensor for phosphate based on Eu³⁺-modulated Au NCs thanks to the competition of oxygen-donor atoms from phosphate with those from the carboxylate groups was developed     

Synthesis and Rheological Investigation ofModel Symmetric 3-Arm Star Polyethylene简

A variety of linear and 3-arm star polyethylene （PE） model polymers covering a wide range of molecular weight are synthesized by the living polymerization of butadiene and the subsequent hydrogenation. Several rheological parameters of these model linear and 3-arm star PE samples are analyzed for detecting the long chain branching （LCB） structure. It is found that the analyses based on zero shear viscosity, vGP plot and flow activation energy are very sensitive to the 3-arm star PEs. The information on the presence of LCB can be obtained with these methods even for low molecular weight samples, which can not be determined by GPC-MALLS. However the information about the LCB structure can not be obtained by the rheological methods alone.     

Miniaturization of GPS patch antennas based on novel dielectric ceramics Zn(1−x)MgxAl2O4 by sol–gel method

The need for miniaturization and weight reduction of GPS patch antennas has prompted the search for new microwave dielectric materials. In this study, a sol–gel method was used to prepare Zn_(1?x)Mg_xAl₂O₄ thin films and fabricate GPS patch antennas at a low annealing temperature (700 °C). X-ray diffraction (XRD) patterns, field emission scanning electron microscopy images, Fourier transform infrared spectra, and optical band gap analyses confirmed the nanostructure of (Mg/Zn)Al₂O₄. The XRD patterns displayed the characteristic peaks of (Mg/Zn)Al₂O₄ with a face-centered cubic structure. Mg addition decreased the crystallite size, surface morphology, and lattice parameters of the resultant films, evidently affecting their density and dielectric constant (? _r ). Based on the material investigated and microwave antenna theory, GPS patch antennas were fabricated using Zn_(1?x)Mg_xAl₂O₄ and then studied using a PNA series network analyzer. The fabricated patch antennas with different ? _r ceramics decreased in size from 12.5 to 10.8 cm². The patch antennas resonated at a frequency of 1.570 GHz and provided a return loss bandwidth between ?16.6 and ?20.0 dB; their bandwidth also improved from 90 to 255 MHz. The GPS patch antenna fabricated from Zn_0.70Mg_0.30Al₂O₄ showed an excellent combination of return loss (?20.0 dB), small size (10.8 cm²), and wide bandwidth (255 MHz). Therefore, addition of Mg improves antenna performance and decreases the dimensions of the device.