基于砼SHPB试验数值分析的HJC模型参数研究

为了研究混凝土HJC本构模型的参数取值及其参数对混凝土动态性能的影响,本文基于HJC模型原始参数,运用有限元软件ANSYS/LS-DYNA对混凝土SHPB试验进行了数值模拟,结果显示数值计算结果与试验结果存在一定的差异。据此根据模型中参数的物理意义确定出可能影响混凝土动态性能的关键参数,通过保持其他参数不变、改变关键参数的方法对混凝土SHPB试验进行数值分析,得到了各关键参数对混凝土动态性能的影响规律,并基于该分析结果对HJC模型的原始参数进行了修正。数值模拟结果表明,采用本文修正参数的计算结果与试验结果吻合良好,能较准确地反映混凝土的动态性能。     

溶液间歇结晶过程成核与生长阶段的定量识别

为定量识别溶液间歇结晶过程中的成核和生长阶段,基于晶粒数目和粒度的变化对粒度分布(CSD)的二阶和三阶矩量影响程度的不同,定义并关联了无因次变量K和K^*.添加晶种KNO₃-H₂O溶液结晶过程模拟计算的结果表明,K和K^*值均呈先降后升的变化趋势,成核时单调下降,生长过程中单调上升;且K与K^*值较接近.测定了KNO₃-H₂O溶液自发成核结晶过程中溶液浓度和透光率的变化,用K^*判据定量识别出成核阶段和生长阶段,并与晶体线性生长速率模型检验的结果相吻合.K值的计算依赖于CSD和结晶动力学参数,而K^*作为成核和生长阶段的模型判据,由实验测定的溶液浓度和透光率计算得到.     

餐饮垃圾热解制取生物燃油的实验研究

主要研究温度、餐饮垃圾种类以及催化剂对餐饮垃圾热解所制生物燃油的产率和品质的影响。结果表明,猪肉和米饭的最佳产油温度均为410℃,白菜的最佳产油温度为450℃。米饭、白菜、猪肉的产油率分别为45.02%、25.60%、71.26%。采用氧弹热量计对其热值进行测定,米饭和白菜热解油的高位热值较低,分别为18.30MJ/kg和17.49MJ/kg;而猪肉热解油的高位热值为36.57 MJ/kg, 并且黏稠度较高。催化剂Co-MCM-41的催化效果明显,使餐饮垃圾的产油率由41.99%提高到66.30%,同时使热解油中的含氧化合物明显降低,而烷烃类和烯烃类的含量明显增加,高位热值由30.30MJ/kg提高到32.74MJ/kg。通过物理吸附仪对新制备的和使用一次后再生的催化剂Co-MCM-41进行表征,结果表明,催化剂Co-MCM-41再生后孔容、孔径和比表面积变化不大,性质基本不变,活性依然存在。
     

Synthesis and properties of a novel squaraine dye modified by ferrocene

A novel squaraine dye（SQ） modified by ferrocene has been synthesized through（E）-dodecyl-2-ferrocenyl vinyl-1H-pyrrole and squaric acid.The molecular structure of SQ was characterized by ¹H NMR,¹³C NMR,MS and elemental analysis.SQ is high soluble in common solvents.The maximum absorptions of SQ in different solvents are in the range of 708-734 nm,exhibiting positive solvatochromism with increasing solvent polarity.The optical and electrical properties of SQ indicate that it is a promising electron donor material for bulk-heterojunction organic solar cell.     

钼铁钴硫簇合物催化乙炔还原性质的研究

钼铁钴硫簇合物催化乙炔还原性质的研究①南玉明②（大庆石油学院石化系，安达１５１４００）徐吉庆蔡辉（吉林大学化学系，长春１３００２３）关键词簇合物类立方烷结构催化电化学性质在化学模拟生物固氮研究的推动下，人们已合成了上百种Ｍｏ－Ｆｅ－Ｓ簇合物，并研究了...     

Synthesis and Nonlinear Optical Properties of New Quadrupolar Chromophores

Two-photon absorption (TPA) has recently received considerable attention because they offer opportunities for both fundamental research and technological applications. The potential applications, including optical data storage, two-photon photodanamic therapy and optical limiting mainly depend on the materials with large two-photon cross section (δTPA)1. Here, we reported two novel chromophores based on symmetric structure of “D-A-Core-A-D”, where D and A stand for electron-donor and e…     

Blending to Make Nonhealable Polymers Healable: Nanophase Separation Observed by CP/MAS 13C NMR Analysis

Can commodity polymers are made to be healable just by blending with self-healable polymers? Here we report the first study on the fundamental aspect of this practically challenging issue. Poly(ether thiourea) (PTUEG₃; T_g=27 °C) reported in 2018 is extraordinary in that it is mechanically robust but can self-heal even at 12 °C. In contrast, poly(octamethylene thiourea) (PTUC₈; T_g=50 °C), an analogue of PTUEG₃, cannot heal below 92 °C. We found that their polymer blend self-healed in a temperature range above 32 °C even when its PTUEG₃ content was only 20 mol %. Unlike PTUEG₃ alone, this polymer blend, upon exposure to high humidity, barely plasticized, keeping its excellent mechanical properties due to the non-hygroscopic nature of the PTUC₈ component. CP/MAS ¹³C NMR analysis revealed that the polymer blend was nanophase-separated, which possibly accounts for why such a small amount of PTUEG₃ provided the polymer blend with humidity-tolerant self-healable properties.     

Al2O3 Nanosheets Rich in Pentacoordinate Al3+ Ions Stabilize Pt‐Sn Clusters for Propane Dehydrogenation

In heterogeneous catalysis, supports play a crucial role in modulating the geometric and electronic structure of the active metal phase for optimizing the catalytic performance. A γ‐Al₂O₃ nanosheet that contains 27 % pentacoordinate Al³⁺ sites can nicely disperse and stabilize raft‐like Pt‐Sn clusters as a result of strong interactions between metal and support. Consequently, there are strong electronic interactions between the Pt and Sn atoms, resulting in an increase in the electron density of the Pt sites. When used in the propane dehydrogenation reaction, this catalyst displayed an excellent specific activity for propylene formation with >99 % selectivity, and superior anti‐coking and anti‐sintering properties. Its exceptional ability to maintain the high activity and stability at ultrahigh space velocities further showed that the sheet construction of the catalyst facilitated the kinetic transfer process.     

液相色谱-质谱法测定不粘锅特富龙涂层中全氟辛酸铵残留

报道了一种基于快速溶剂提取(ASE)-液相色谱-串联质谱(LC-MS/MS)法定量测定不粘锅特富龙涂层中全氟辛酸铵(APFO)残留分析方法。采用乙腈快速溶剂提取不粘锅涂层中的APFO残留,以乙腈和10mmol/L乙酸铵水溶液为流动相,经高效液相色谱分离,以多极反应监测(MRM)测定。本方法在0.5~100μg/L内线性良好(R2=0.9995);检出限1 ng/g;方法回收率在80.5%~124.6%之间,相对标准偏差为1.33%~9.30%。本方法准确、快速、简便,可用于不粘锅涂层中APFO残留的检测。     

信号与本振光振幅分布对星间相干光通信系统混频效率的影响

星间相干光通信系统中,信号光与本振光的不同分布将影响外差混频效率.在假设信号光与本振光偏振一致、相位匹配、几何中心重合的前提下,详细推导了信号光振幅为平面波(Uniform)、高斯(Gauss)分布,本振光为艾里斑(Airy)、Uniform及Gauss分布时的6种外差混频效率关系式,其中4种得到了精确的解析式.在此基...