求解二层规划问题的遗传算法

本文求解二层规划问题的遗传算法，给出了算法基本框架并对算法实现进行了研究．算法适用于各类线性和非线性二层规划问题．数值计算结果显示，该方法是可行和有效的．     

A simple approach toward low‐dielectric polyimide nanocomposites: Blending the polyimide precursor with a fluorinated polyhedral oligomeric silsesquioxane

This article describes a new and simple method for preparing polyimide nanocomposites that have very low dielectric constants and good thermal properties: simply through blending the polyimide precursor with a fluorinated polyhedral oligomeric silsesquioxane derivative, octakis(dimethylsiloxyhexafluoropropyl) silsesquioxane (OF). The low polarizability of OF is compatible with polyimide matrices, such that it can improve the dispersion and free volume of the resulting composites. Together, the higher free volume and lower polarizability of OF are responsible for the lower dielectric constants of the PI‐OF nanocomposites. This simple method for enhancing the properties of polyimides might have potential applicability in the electronics industry. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6296–6304, 2008     

Mechanochemical synthesis of Na-β/β″-Al2O3

Na-β/β″-alumina powders were synthesized by a mechanochemical processing. The influences of mechanical activation in the phase composition and microstructure of the final powders were investigated. Fine Na-β/β″-alumina powders were obtained at a lower temperature than that of a conventional solid-state reaction processing. The mechanism of the mechanical activation was studied. It was found that mechanical activation greatly affected the calcining process and phase composition of the precursory powders.     

Synthesis of PMMA‐b‐PBA block copolymer in homogeneous and miniemulsion systems by DPE controlled radical polymerization

In this research, poly(methyl methacrylate)‐b‐poly(butyl acrylate) (PMMA‐b‐PBA) block copolymers were prepared by 1,1‐diphenylethene (DPE) controlled radical polymerization in homogeneous and miniemulsion systems. First, monomer methyl methacrylate (MMA), initiator 2,2′‐azobisisobutyronitrile (AIBN) and a control agent DPE were bulk polymerized to form the DPE‐containing PMMA macroinitiator. Then the DPE‐containing PMMA was heated in the presence of a second monomer BA, the block copolymer was synthesized successfully. The effects of solvent and polymerization methods (homogeneous polymerization or miniemulsion polymerization) on the reaction rate, controlled living character, molecular weight (M_n) and molecular weight distribution (PDI) of polymers throughout the polymerization were studied and discussed. The results showed that, increasing the amounts of solvent reduced the reaction rate and viscosity of the polymerization system. It allowed more activation–deactivation cycles to occur at a given conversion thus better controlled living character and narrower molecular weight distribution of polymers were demonstrated throughout the polymerization. Furthermore, the polymerization carried out in miniemulsion system exhibited higher reaction rate and better controlled living character than those in homogeneous system. It was attributed to the compartmentalization of growing radicals and the enhanced deactivation reaction of DPE controlled radical polymerization in miniemulsified droplets. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4435–4445, 2009     

New P‐type of poly(4‐methoxy‐triphenylamine)s derived by coupling reactions: Synthesis,electrochromic behaviors,and hole mobility

Methoxy‐substituted poly(triphenylamine)s, poly‐4‐methoxytriphenylamine ( PMOTPA ), and poly‐N,N‐bis(4‐methoxyphenyl)‐N′,N′‐diphenyl‐p‐phenylenediamine ( PMOPD ), were synthesized from the nickel‐catalyzed Yamamoto and oxidative coupling reaction with FeCl₃. All synthesized polymers could be well characterized by ¹H and ¹³C NMR spectroscopy. These polymers possess good solubility in common organic solvent, thermal stability with relatively high glass‐transition temperatures (T_gs) in the range of 152–273 °C, 10% weight‐loss temperature in excess of 480 °C, and char yield at 800 °C higher than 79% under a nitrogen atmosphere. They were amorphous and showed bluish green light (430–487 nm) fluorescence with quantum efficiency up to 45–62% in NMP solution. The hole‐transporting and electrochromic properties are examined by electrochemical and spectroelectrochemical methods. All polymers exhibited reversible oxidation redox peaks and E_onset around 0.44–0.69 V versus Ag/AgCl and electrochromic characteristics with a color change under various applied potentials. The series of PMOTPA and PMOPD also showed p‐type characteristics, and the estimated hole mobility of O ‐ PMOTPA and Y ‐ PMOPD were up to 1.5 × 10^?4 and 5.6 × 10^?5 cm² V^?1 s^?1, respectively. The FET results indicate that the molecular weight, annealing temperature, and polymer structure could crucially affect the charge transporting ability. This study suggests that triphenylamine‐containing conjugated polymer is a multifunctional material for various optoelectronic device applications. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4037–4050, 2009     

模拟时滞化学反应系统的自适应τ-Leap算法

本文发展了一种模拟时滞化学反应系统的自适应τ-Leap算法（DAr—Leap）．该算法将后验τ-Leap算法应用到时滞化学反应系统，能够自动调节τ使得在时间区间[t，t＋τ）内发生多次反应事件并且精确地满足Leap条件，从而避免了负分子数目的产生，较大地提高了模拟速度．     

Structural characterization and identification of C19‐ and C20‐diterpenoid alkaloids in roots of Aconitum carmichaeli by rapid‐resolution liquid chromatography coupled with time‐of‐flight mass spectrometry

Aconite alkaloids from the roots of Aconitum carmichaeli (Fuzi, in Chinese) have been investigated by rapid‐resolution liquid chromatography coupled with time‐of‐flight mass spectrometry (TOFMS) in positive mode. With dynamic adjustment of the key role as fragmentor voltage in TOFMS, an efficient transmission of the ions was achieved to obtain the best sensitivity for providing the molecular formula for each analyte, and abundant fragment ions for structural information. Fifteen authentic standards isolated from Fuzi with various structures were first characterized by TOFMS, including diester‐diterpenoid alkaloids (DDAs), monoester‐diterpenoid alkaloids (MDAs), alkylol amine‐diterpenoid alkaloids (ADAs), veatchine‐type alkaloids and atisine‐type alkaloids. Fragmentation rules and key diagnostic fragment ions have been summarized, and possible pathways of fragmentation have been proposed. By accurate mass measurements within 5 ppm error for each ion, 30 C₁₉‐diterpenoid alkaloids including 10 DDAs, 3 MDAs, 9 ADAs and 8 other type alkaloids, and 8 C₂₀‐diterpenoid alkaloids including 4 veatchine‐type alkaloids and 4 atisine‐type alkaloids could be identified in a methanolic extract of Fuzi. Some isomers of aconite alkaloids were also differentiated. Based on the differences between their fragmentation pathways and special fragment ions, each type of aconite alkaloids was differentiated. Copyright © 2009 John Wiley & Sons, Ltd.