LIGHT-INDUCED SYNTHESIS OF ANTHOCYANIN IN CARROT CELLS IN SUSPENSION—IV. THE ACTION SPECTRUM

Abstract— Using carrot cell suspension in 2,4-dichlorophenoxyacetic acid (2,4-D)-depleted culture medium, fluence-response curves for the formation of anthocyanin were determined at various wavelengths from 250 to 800 nm. In the fluence-response curves at wavelengths between 260 and 330 nm, the response showed a sharp fluence-dependent increase after the fluence exceeded threshold level at the respective wavelength. Such a sharp increase in response was not observed by light at 450 nm or longer wavelengths, although the response obtained by higher fluence of such light was always higher than that in the dark control. Action spectra determined at the sharp increasing phase of the response showed the single peak at 280 nm which equals the absorption maximum of UV-B photoreceptor.
Although red (R)-light alone had a minor effect on anthocyanin accumulation, it modulated the action of UV-B light. That is, when carrot cells were irradiated with R-light either before or after UV-B irradiation, anthocyanin formation was greatly enhanced above the level enhanced by UV-B light alone. The most effective wavelength for this enhancement was 660 nm. The effect of R-light on the anthocyanin formation of the UV-B irradiated cells was reversed by immediately following it with far-red light, suggesting the involvement of phytochrome in the R-effect.     

Epsilon -N,N,N-trimethyllysine-specific ions in matrix-assisted laser desorption/ionization-tandem mass spectrometry

Epsilon -N,N,N-trimethyllysine (K(me3)) is a component of a number of proteins and plays an important role in the expression of their biological functions. Trimethylation, which causes an incremental increase in mass of 42.0470 Da from that of the corresponding MH(+) ion, cannot be distinguished from the acetylation (+42.0106 Da), which also occurs on epsilon-amino groups of Lys or alpha-amino groups in many proteins, without high-accuracy mass measurement which is accurate to within the second decimal place. MALDI-MS and MS/MS have been applied for the analyses of post-translational modifications of histone H3, which is known to contain both multiple acetylation and methylation sites in its sequence. During the measurements of the modified peptides, a novel fragmentation which involves the loss of trimethylamine from K(me3) was found. This characteristic fragmentation, which was observed to produce ions separated by 59 Da from the conventional precursor ion or sequence ions, would be useful for probing K(me3) units in the sequence.     

Chain length effect of the counterion on the partial molal volume of alkanesulfonates

The partial molal volumes of two series of homologous surfactants, n-alkylammonium decanesulfonates and a, ?-alkanediammonium nonanesulfonates, were measured below and above their CMC in aqueous solution. Their counterions were n-alkylammonium and a, ?-alkanediammonium. The relationship between the partial molal volume and the chain length of the counterion below the CMC had an inflection point. The relationship between them, above the CMC, was almost linear. In the case of the alkylammonium salts, the values of the volume change of micellization were almost the same when the chain length of the counterions was shorter than the butyl, and increased with an increase in the chain length when it was longer than the propyl. In the case of the alkanediammonium salts, the volume change of micellization showed a small decrease with the chain length when it was shorter than octane, and was very large for the nonane ammonium salt. The large positive increase in the volume change with the increase in the chain length of the counterion can be explained by the hydrophobic interaction between the alkyl chain of the counterion and the hydrophobic core of the micelle.     

Surface-potential reversibility of an amino-terminated self-assembled monolayer based on nanoprobe chemistry

Nanoprobe chemistry offers a promising approach for the construction of nanostructures consisting of organic molecules by employing the tip of a scanning probe microscope. In a previous report, we demonstrated that a nitroso-terminated surface on an organosilane self-assembled monolayer could be converted into an amino-terminated surface by applying such a nanoprobe electrochemical technique. This paper reports on surface-potential reversibility originating from a reversible chemical reaction between amino and nitroso groups. In addition, we demonstrate surface-potential memory based on this chemical reversibility. Amino-terminated SAMs were prepared from p-aminophenyl-trimethoxysilane through chemical vapor deposition. Surface potentials were acquired by Kelvin force microscopy. When scanning probe lithography was conducted with a gold tip at positive-bias voltages, the surface potential of the scanned area shifted dramatically in the negative direction. Scanning with negative-bias voltages led to positive shift in the surface potential of the scanned area. The surface potential could be recovered even after multiple scannings with positive and negative applied bias voltages. On the basis of this discovery, we also succeeded in demonstrating surface-potential memory via our nanoprobe electrochemical technique.     

Lipid-soluble and water-soluble arsenic compounds in blubber of ringed seal (Pusa hispida)

High concentrations of arsenic were observed in the blubber of ringed seals (Pusa hispida) in our previous study. To better understand the arsenic accumulation in blubber of marine mammals, arsenicals in the blubber of ringed seal were characterized using high performance liquid chromatography–inductively coupled plasma mass spectrometry (HPLC–ICPMS). The most predominant water-soluble arsenical in the blubber was dimethylarsinic acid (DMA), in spite of the predominance of arsenobetaine in other tissues. Lipid-soluble fraction was hydrolyzed under mild (tetraethylammonium hydroxide (TEAH) hydrolysis) and strong (NaOH hydrolysis) conditions, and then an aliquot of hydrolysate was injected onto HPLC–ICPMS. Both TEAH-labile and TEAH-stable/NaOH-labile lipid-soluble fractions contained precursors of DMA. These results suggest that the blubber might be the pool of DMA and DMA-containing precursors in ringed seals.     

Regulation of geometry around the ruthenium center of bis(2-pyridinecarboxylato) complexes by the nitrosyl moiety: syntheses, structures, and theoretical studies

cis-[Ru(NO)Cl(pyca)(2)] (pyca = 2-pyridinecarboxylato), in which the two pyridyl nitrogen atoms of the two pyca ligands coordinate at the trans position to each other and the two carboxylic oxygen atoms at the trans position to the nitrosyl ligand and the chloro ligand, respectively (type I shown as in Chart 1), reacted with NaOCH(3) to generate cis-[Ru(NO)(OCH(3))(pyca)(2)] (type I). The geometry of this complex was confirmed to be the same as the starting complex by X-ray crystallography: C(13.5)H(13)N(3)O(6.5)Ru; monoclinic, P2(1)/n; a = 8.120(1), b = 16.650(1), c = 11.510(1) A; beta = 99.07(1) degrees; V = 1536.7(2) A(3); Z = 4. The cis-trans geometrical change reaction occurred in the reactions of cis-[Ru(NO)(OCH(3))(pyca)(2)] (type I) in water and alcohol (ROH, R = CH(3), C(2)H(5)) to form [[trans-Ru(NO)(pyca)(2)](2)(H(3)O(2))](+) (type V) and trans-[Ru(NO)(OR)(pyca)(2)] (type V). The reactions of the trans-form complexes, trans-[Ru(NO)(H(2)O)(pyca)(2)](+) (type V) and trans-[Ru(NO)(OCH(3))(pyca)(2)] (type V), with Cl(-) in hydrochloric acid solution afforded the cis-form complex, cis-[Ru(NO)Cl(pyca)(2)] (type I). The favorable geometry of [Ru(NO)X(pyca)(2)](n)(+) depended on the nature of the coexisting ligand X. This conclusion was confirmed by theoretical, synthetic, and structural studies. The mono-pyca-containing nitrosylruthenium complex (C(2)H(5))(4)N[Ru(NO)Cl(3)(pyca)] was synthesized by the reaction of [Ru(NO)Cl(5)](2)(-) with Hpyca and characterized by X-ray structural analysis: C(14)H(24)N(3)O(3)Cl(3)Ru; triclinic, Ponemacr;, a = 7.631(1), b = 9.669(1), c = 13.627(1) A; alpha = 83.05(2), beta = 82.23(1), gamma = 81.94(1) degrees; V = 981.1(1) A(3); Z = 2. The type II complex of cis-[Ru(NO)Cl(pyca)(2)] was synthesized by the reaction of [Ru(NO)Cl(3)(pyca)](-) or [Ru(NO)Cl(5)](2)(-) with Hpyca and isolated by column chromatography. The structure was determined by X-ray structural analysis: C(12)H(8)N(3)O(5)ClRu; monoclinic, P2(1)/n; a = 10.010(1), b = 13.280(1), c = 11.335(1) A; beta = 113.45(1) degrees; V = 1382.4(2) A(3); Z = 4.     

Oxidative cyclization of morusin

Oxidative cyclization of morusin (I) by using one-electron transfer oxidizing agents (manganese dioxide, silver oxide) afforded morusin hydroperoxide (II). A similar reaction was carried out in the presence of 2,4,6-tri-t-butylphenol, a radical quencher, to give compounds (IV, V, VI and VII) coupled with the 2,4,6-tri-t-butylphenoxy radical. On the basis of above results, the possible mechanism of this oxidative cyclization was discussed. In addition, morusin hydroperoxide (II) was also obtained by photo-sensitized oxidation of morusin (I) in the presence of sensitizers (Rose Bengal, hematoporphyrin). To elucidate the reaction mechanism similar reactions were carried out in the presence of radical quencher (2,4,6-tri-t-butylphenol) or singlet oxygen quencher (triethylenediamine). From these results, the possible mechanism of the formation of morusin hydroperoxide (II) from morusin (I) was discussed.     

Approaches to dioxin analysis by HRGC-HRMS and hybrid HRGC-MS-MS

A hybrid mass spectrometer with an EBQQ configuration was used to investigate two approaches to trace dioxin analysis: high resolution gas chromatography – high resolution mass spectrometry (HRGC-HRMS) and high resolution gas chromatography – mass spectrometry – mass spectrometry (HRGC-MS-MS). It is shown that selected ion monitoring (SIM) HRGC-HRMS exhibits better selectivity for dioxins separated on a cyanopropyl column than is otherwise obtained under medium resolution mass spectrometry (3,000 resolution), while optimization of conditions for HRGC-MS-MS allowed the observation of 350 femtograms of the highly toxic 2,3,7,8-TCDF at a S/N ratio of 5:1. Both methods were applied to environmental samples with good results.