1,8-bis(diphenylmethylium)naphthalenediyl dication as an organic oxidant: synthesis of benzidines via self-coupling of N,N-dialkylanilines

1,8-Bis(diphenylmethylium)naphthalenediyl dications promoted oxidative coupling of various N,N-dialkylanilines to afford the corresponding para-coupled bisanilines, benzidines, in good to excellent yield. The dications were readily prepared from a cyclic ether precursor, derived from 1,8-dibromonaphthalene, via deoxygenation with a silylating reagent in 1,1,1,3,3,3-hexafluoro-2-propanol under anhydrous conditions. [reaction: see text]     

30-mJ, diode-pumped, chirped-pulse Yb:YLF regenerative amplifier

A diode-pumped chirped-pulse regenerative amplifier with a cooled Yb:YLF crystal has been developed. The output pulse energy is 30 mJ at 20-Hz repetition rate. A high effective extraction efficiency of 68% is obtained, which is attributed to reduced saturation fluence at low temperature and to a high effective pulse energy fluence during regenerative amplification. After pulse compression by use of a parallel grating pair, 18-mJ pulse energy and 795-fs pulse duration are obtained.     

Time-resolved study of intramolecular charge transfer fluorescence in 1,2,3,4-tetrachloro-11H-isoindolo-[2, 1-a]-benzimidazol-11-one

Fluorescent properties of 1,2,3,4-tetrachloro-11H-isoindolo-[2,1-a]-benzimidazol-11-one (TCIB) in various organic solutions are described. Detailed investigation of the fluorescence from the solutions revealed that it was ascribable to the electronic transition from the lowest singlet excited state of an isolated molecule to its ground state, though the fluorescence spectrum was broad and structureless and the Stokes’ shift was about 1 eV. The absorption peak of TCIB was relatively insensitive to change in solvent polarity, whereas its fluorescence peak shifted to the red with an increase in the polarity. This finding suggests that the dipole moment of the molecule in the ground state is almost zero, and that the excited state has a non-zero dipole moment, which coincides with the predicted semiempirical molecular orbital calculation. Fluorescence quantum efficiency decreased with increase of solvent polarity. The efficiency was reduced by a factor of 39 in going from n-hexane solution to acetonitrile solution. The radiative rate constant also decreased with increase of solvent polarity. However, its reduction was very moderate; the reduction factor was only 2.5 for acetonitrile solution as compared with n-hexane solution. This finding indicates that the emitting state of the title compound is influenced by a solvent-dependent non-radiative mechanism, for which solvent-sensitive intersystem-crossing deactivation is tentatively proposed.     

Practical aspects of (1)H transverse paramagnetic relaxation enhancement measurements on macromolecules

The use of (1)H transverse paramagnetic relaxation enhancement (PRE) has seen a resurgence in recent years as method for providing long-range distance information for structural studies and as a probe of large amplitude motions and lowly populated transient intermediates in macromolecular association. In this paper we discuss various practical aspects pertaining to accurate measurement of PRE (1)H transverse relaxation rates (Gamma(2)). We first show that accurate Gamma(2) rates can be obtained from a two time-point measurement without requiring any fitting procedures or complicated error estimations, and no additional accuracy is achieved from multiple time-point measurements recorded in the same experiment time. Optimal setting of the two time-points that minimize experimental errors is also discussed. Next we show that the simplistic single time-point measurement that has been commonly used in the literature, can substantially underestimate the true value of Gamma(2), unless a relatively long repetition delay is employed. We then examine the field dependence of Gamma(2), and show that Gamma(2) exhibits only a very weak field dependence at high magnetic fields typically employed in macromolecular studies. The theoretical basis for this observation is discussed. Finally, we investigate the impact of contamination of the paramagnetic sample by trace amounts (5%) of the corresponding diamagnetic species on the accuracy of Gamma(2) measurements. Errors in Gamma(2) introduced by such diamagnetic contamination are potentially sizeable, but can be significantly reduced by using a relatively short time interval for the two time-point Gamma(2) measurement.     

Ethylene and propylene polymerization behavior of a series of bis(phenoxy–imine)titanium complexes

This contribution reports ethylene and propylene polymerization behavior of a series of Ti complexes bearing a pair of phenoxy–imine chelate ligands. The bis(phenoxy–imine)Ti complexes in conjunction with methylalumoxane (MAO) can be active catalysts for the polymerization of ethylene. Unexpectedly, this C₂ symmetric catalyst produces syndiotactic polypropylene. ¹³C NMR spectroscopy has revealed that the syndiotacticity arises from a chain-end control mechanism. Substitutions on the phenoxy–imine ligands have substantial effects on both ethylene and propylene polymerization behavior of the complexes. In particular, the steric bulk of the substituent ortho to the phenoxy–oxygen is fundamental to obtaining high activity and high molecular weight for ethylene polymerization and high syndioselectivity for the chain-end controlled propylene polymerization. The highest ethylene polymerization activity, 3240 kg/mol-cat h, exhibited by a complex having a t-butyl group ortho to the phenoxy–oxygen, represents one of the highest reported to date for Ti-based non-metallocene catalysts. Additionally, the polypropylene produced exhibits a T_m, 140 °C, and syndioselectivity, rrrr 83.7% (achieved by a complex bearing a trimethylsilyl group ortho to the phenoxy–oxygen) that are among the highest for polypropylenes produced via a chain-end control mechanism. Hence, the bis(phenoxy–imine)Ti complexes are rare examples of non-metallocene catalysts that are useful for the polymerization of not only ethylene but also propylene.     

Characterization of tension and normally lignified wood cellulose inPopulus maximowiczii

We have investigated unlignified tension wood and normally lignified wood celluloses inPopulus maximowiczii with particular reference to the composition of two crystalline phases I/I (triclinic/ monoclinic). Four independent techniques, which enable us to detect the two phases, CP/MAS¹³C NMR, Fourier transform infrared microscopy, selected-area electron diffraction, and X-ray diffraction were applied. Because of the low crystallinity of wood celluloses, particularly in the case of celluloses in the lignified cell wall, no single method was decisive enough to be able to determine the composition of the two phases as one can with highly crystalline materials. The I dominant structure (monoclinic crystal type) was, however, preferred for both tension and normal wood celluloses.     

Synthetic Utilization of α-Phosphonovinyl Anions

The α-phosphonovinyl anions, generated in situ from treatment of β-hetero-substituted vinyl-phosphonates 1a-c with LDA (or LTMP), were trapped with various electrophiles such as chlorotriorganosilanes, chlorotrimethylgermane, chlorotriorganotins, dimethyl disulfide, and halogen to afford the corresponding β-hetero-substituted α-functionalized vinylphosphonates 2–14 in good to excellent yields. The Friedel-Crafts reaction of α-(silyl) or α-(germyl)phosphonoketene dithioacetals 2, 9 or 4 with acid chlorides gave α-acylated phosphonoketene dithioacetals 15–19 in 53–91 % yields. The palladium-catalyzed cross-coupling reaction of β-ethoxy-α-(tributylstannyl)vinylphosphonate 13 with a variety of organic halides (R = acyl, allyl, aryl etc.) provided β-ethoxy-α-substituted vinylphosphonates 20–25 in good to moderate yields. The palladium-mediated cross-coupling reaction of α-(iodo)-vinyl-phosphonates 7, 14 with terminal acetylenes afforded α-alkynylated vinylphosphonates 26–29 in 69–83 % yields.     

Isothermal differential scanning calorimetry on an exothermic phenomenon during thermal decomposition of hydromagnesite 4 MgCO3 · Mg(OH)2 · 4 H2O

An exothermic phenomenon and a simultaneous rapid evolution of a small amount of carbon dioxide at ?500°C during thermal decomposition of hydromagnesite 4 MgCO₃ · Mg(OH)₂ · 4 H₂O was studied by isothermal DSCTG in a carbon dioxide atmosphere. It was quantitatively confirmed that the exothermic phenomenon was due to crystallization of MgCO₃ from the amorphous phase and that the evolution of carbon dioxide was due to decomposition of the MgCO₃ by the heat of crystallization (?3.4 kcal mole^?1.