连续波锁模Pr3+:YLF激光器

本文报导了采用氩离子激光器来泵浦Pr³⁺:YLF晶体,应用声光调制器实现了主动锁模;同时应用振动─高反射平面镜也实现了被动锁模,两种锁模均得到了ps光脉冲.据作者了解这是这种晶体材料的第一次锁模运转.     

Solution of sparse quasi-square rectangular systems by Gaussian elimination

We present a general method for the linear least-squares solutionof overdetermined and underdetermined systems. The method isparticularly efficient when the coefficient matrix is quasi-square,that is when the number of rows and number of columns is almostthe same. The numerical methods for linear least-squares problemsand minimum-norm solutions do not generally take account ofthis special characteristic. The proposed method is based onLU factorization of the original quasi-square matrix A, assumingthat A has full rank. In the overdetermined case, the LU factorsare used to compute a basis for the null space of A^T. The right-handside vector b is then projected onto this subspace and the least-squaressolution is obtained from the solution of this reduced problem.In the case of underdetermined systems, the desired solutionis again obtained through the solution of a reduced system.The use of this method may lead to important savings in computationaltime for both dense and sparse matrices. It is also shown inthe paper that, even in cases where the matrices are quite small,sparse solvers perform better than dense solvers. Some practicalexamples that illustrate the use of the method are included.     

Development and Validation of a Liquid Chromatography-Tandem Mass Spectrometry Method for the Determination of Ezetimibe in Human Plasma and Pharmaceutical Formulations

An analytical method based on liquid chromatography-tandem mass spectrometry (LC-MS-MS) was developed and validated for the determination of ezetimibe in human plasma. Ezetimibe and etoricoxib (internal standard) were extracted from the plasma by liquid-liquid extraction and separated on a C₁₈ analytical column (50 × 3.0 mm I.D.) with acetonitrile:water (85:15, v/v) as mobile phase. Detection was carried out by positive electrospray ionization (ESI+) in multiple reaction monitoring (MRM) mode. The chromatographic separation was obtained within 2.0 min and was linear in the concentration range of 0.25–20ng mL⁻¹ for free ezetimibe and of 1–300ng mL⁻¹ for total ezetimibe. The mean extraction recoveries for free and total ezetimibe from plasma were 96.14 and 64.11%, respectively. Method validation investigated parameters such as linearity, precision, accuracy, specificity and stability, giving results within the acceptable range. The proposed method was successfully applied to the quantitation of ezetimibe and its glucuronide in human plasma to support clinical and pharmacokinetic studies. Moreover, the method was used for the quality control analysis of pharmaceutical dosage forms. Revised: 4 January and 3 February 2006     

Green synthesis and antibacterial activity of chalcogenoesters

Herein, we present a new variation for an eco-friendly methodology for the synthesis of chalcogenoester in good-to-excellent yields in a short time, with an easy work-up/purification step, and in a greenest methodology, affording the minimum generation of solid and liquid waste, in comparison to that described in the literature. Additionally, some selected compounds were evaluated as antimicrobial agents, showing moderate activity against a variety of microorganisms including the K. pneumoniae, P. aeruginosa and also some selected fish pathogenic bacteria.     

Determination of parabens in shampoo using high performance liquid chromatography with amperometric detection on a boron-doped diamond electrode

Methylparaben (MePa), ethylparaben (EtPa) and propylparaben (PrPa) have been widely used, among others, as chemical preservatives in cosmetics, drugs and foods. As these compounds are linked with allergies, dermatitis and estrogenic properties, it is necessary to control the concentration of these substances in different matrices. The aim of this paper are: to evaluate the electrochemical behavior of parabens on the boron-doped diamond (BDD) electrode and the development of a chromatographic method, with electrochemical detection (HPLC-ED), for determination of parabens in shampoo. A BDD (8000 ppm) electrode was adapted in a thin layer mode analytical cell consisting of a stainless steel and a platinum wire as reference and auxiliary electrodes, respectively. Chromatographic separations were obtained with a reversed phase C8 analytical column and a mobile phase of 0.025 mol L⁻¹ disodium phosphate, pH 7.0, and acetonitrile (40:60, v/v), delivered at a flow rate of 1.0 mL min⁻¹. Sample preparation was performed by solid phase extraction using C18 cartridges and acetonitrile for elution. Benzylparaben was employed as internal standard. The HPLC-ED method developed, using the BDD electrode, was validated for the determination of parabens in shampoos and presented adequate linearity (>0.999), in the range of 0.0125-0.500% (w/w), detectability 0.01% (w/w), precision (RSD of 2.3-9.8%) and accuracy (93.1-104.4%) and could be applied for routine quality control of shampoos containing MePa, EtPa and PrPa.     

Determination of CO2 capture during accelerated carbonation of engineered cementitious composite pastes by thermogravimetry

Journal of Thermal Analysis and Calorimetry - The present study has evaluated the rheological behavior of an oil-based (5W50) hybrid nanofluid [magnesium oxide (65%)–multi-walled carbon...     

Separation of carbohydrates on electrophoresis microchips with controlled electrolysis

This study reports the separation of fructose, galactose, glucose, lactose and sucrose on glass microchip electrophoresis (ME) devices using a microfluidic platform adapted with external reservoirs for controlling the electrolysis phenomenon. The connections between external reservoirs and microfluidic platform were performed by saline bridges created using silicone tubing filled with BGE. The separation conditions were optimized and the best results were achieved using a BGE containing 75 mmol/L NaOH and 15 mmol/L trisodium phosphate. Electrophoretic separations were monitored using a capacitively coupled contactless conductivity detection system. The controlled electrolysis has successfully allowed the application of a higher voltage on the separation channel promoting the baseline separation of five carbohydrates within 180 s with great run‐to‐run repeatability (RSD < 1%). The achieved efficiencies ranged from 45 000 ± 6000 to 70 000 ± 3000 plates/m demonstrating a performance better than ME devices without controlled electrolysis. The proposed system offered good linearity from 1 to 10 mmol/L and LODs between 150 and 740 μmol/L. The use of external tubes for controlling the electrolysis phenomenon on ME devices has solved common problems associated to run‐to‐run repeatability and analytical reliability required for routine and quantitative analysis.     

Development and validation of a liquid chromatographic/tandem mass spectrometric method for determination of tetracycline in human plasma: application to bioequivalence study

A fast, sensitive, and specific liquid chromatographic/tandem mass spectrometric method was developed and validated for determination of tetracycline in human plasma. Tetracycline and oxytetracycline [internal standard (IS)] were extracted from the plasma by protein precipitation. The mobile phase consisted of acetonitrile-formic acid 0.1% (48 + 52, v/v), run at a flow rate of 1 ml/min (split 1:5). Detection was performed by positive electrospray ionization in multiple reaction monitoring mode, monitoring the transitions 444.8 > 410.0 and 461.0 > 426.0 for tetracycline and IS, respectively. The analysis was performed in 3.5 min and the method was linear in the plasma concentration range of 50-6000 ng/mL. The mean extraction recoveries for tetracycline and IS from plasma were 92.14 and 94.04%, respectively. Method validation investigated parameters such as the linearity, precision, accuracy, specificity, and stability, giving results within the acceptable range. The proposed method was successfully applied for determination of tetracycline in human plasma samples to support bioequivalence studies.     

Thermal and morphological characterization of highly porous nanocomposites for possible application in potassium controlled release

The use of fertilizer and water availability are essential factors limiting the agricultural production. The controlled release technology is very promising because it allows the maintenance of fertilizer concentrations within an ideal range avoiding inefficiency and toxicity problems, minimizing the environmental impacts and improving their efficiency. In this context, the nanostructured hydrogels appear as a possible carrier vehicle for these controlled release systems due to their inherent properties, such as biodegradability, low toxicity, and cost, rapid absorption and desorption controlled capacity of water and solutes. In this work, we performed the synthesis of nanostructured hydrogels based on poly(methacrylic acid) (PMAA)/Cloisite-Na⁺ via free radical polymerization. SEM images indicated a similarity in the basic structure of all nanocomposites. The porous diameter of the hydrogels increased with increasing of nanoclay content. EDS analysis showed the ions belonging to nanoclay present in the nanocomposites, confirming the formation of true nanocomposites. TG–DTG and DSC techniques confirmed an improvement in the thermal stability of nanocomposites caused by the addition of nanoclay. For instance, the degradation initial temperature of the hydrogel was increased from 198.5 to 203.5 °C, and inversely, the degradation rate of the 2° thermal event was decreased from 0.694 to 0.472% min °C^?1, when the nanoclay was increased from 0 to 20 mass/%. Moreover, the controlled release investigation showed an improvement in the release time and quantity of the fertilizer released with nanoclay content. This result is very required for this specific application.