Synthesis and characterization of crosslinked uniform polymeric microspheres containing a polyimide prepolymer by a new emulsification process

A highly crosslinked poly(styrene–divinyl benzene–trimethyolpropane trimethacrylate) microsphere containing a polyimide prepolymer (PIP) was prepared by a new emulsification method, Shirasu porous glass (SPG) membrane emulsification, and a subsequent radical suspension polymerization. That is, a mixture of styrene, divinyl benzene, trimethyol propane trimethacrylate (TMPTMA), and PIP containing an initiator was permeated through the uniform pores of the SPG membrane into a continuous phase containing a stabilizer to form uniform droplets. Then, the suspension polymerization was carried out at 65 °C for 24 h. The trifunctional crosslinker TMPTMA was added to enhance the destructive strength of the microsphere, and PIP was incorporated into the microsphere to provide an adhesion force by a known self‐curing reaction at 220 °C. The effects of the feed amounts of TMPTMA and PIP on the monomer conversion, size distribution, and destructive strength of the microsphere were investigated. The monomer conversion increased with an increase in TMPTMA. The particle size distribution became narrower as the TMPTMA feed amount increased, but it became broader with an increase in PIP. The destructive strength increased with increases in TMPTMA and PIP. After a heat treatment at 220 °C, the destructive strength decreased because of the heat degradation of the polymer. The addition of TMPTMA suppressed the heat degradation, and PIP could undergo self‐curing at 220 °C. The obtained highly crosslinked uniform microsphere containing PIP has potential applications in liquid‐crystal displays. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2588–2598, 2003     

Coulometric titration of copper in CuxMo6S8−y(0⩽y⩽0.4) with solid Cu-electrolyte Rb4Cu16I7Cl13

In order to determine the copper content x of copper Chevrel compound Cu_xMo₆S_8?y(0?y?0.4) as a function of copper activity a_Cu and sulfur deficit y, a solid state electrochemical cell, Cu/Rb₄Cu₁₆I₇Cl₁₃/Cu_xMo₆S_8?y/Pt, was constructed and coulometric titration studies were made at 400 K. For the evaluation of the coulometric titration data, measurements were made on the electronic conductivity of copper-ion conductor Rb₄Cu₁₆I₇Cl₁₃. Also, a brief investigation was made on the condition of formation of single phase Chevrel Cu_xMo₆S_8?y with varying x and y at 1000°C. The structural change of Cu_xMo₆S_8?y with a change in x and y was studied by the X-ray diffraction method. It was found that x for constant a_Cu decreases with increasing y. The maximum value x_max of x in Cu_xMo₆S_8?y in equilibrium with metallic copper was found to be expressed by $\text{x}{}_{\mathrm{<mtext>max</mtext>}}\text{=-(}\text{10}\text{3}\text{)y+5}$. In the region of y<0.3, x_max exceeded 4, contrary to a presupposition that x_max is less than 4. X-ray analysis revealed that most of the copper Chevrel compounds denoted by Cu_xMo₆S₈ so far were sulfur deficient ones with y?0.4. The importance of sulfur deficit on the properties of the copper Chevrel compound was emphasized.     

Pt(II)- or Au(III)-catalyzed [3+2] cycloaddition of metal-containing azomethine ylides: highly efficient synthesis of the mitosene skeleton

[reaction: see text] Only 1-3 mol % of PtCl(2) or AuBr(3) was sufficient to promote generation and [3+2] cycloaddition of transition-metal-containing azomethine ylides derived from N-(o-alkynylphenyl)imines bearing an internal alkyne moiety. A highly efficient method for the preparation of synthetically useful tricyclic indole derivatives having a substituent at the 3-position of the indole nucleus was established by this method.     

Shimalactone Biosynthesis Involves Spontaneous Double Bicyclo-Ring Formation with 8π-6π Electrocyclization

Shimalactones A and B are neuritogenic polyketides possessing characteristic oxabicyclo[2.2.1]heptane and bicyclo[4.2.0]octadiene ring systems that are produced by the marine fungus Emericella variecolor GF10. We identified a candidate biosynthetic gene cluster and conducted heterologous expression analysis. Expression of ShmA polyketide synthase in Aspergillus oryzae resulted in the production of preshimalactone. Aspergillus oryzae and Saccharomyces cerevisiae transformants expressing ShmA and ShmB produced shimalactones A and B, thus suggesting that the double bicyclo-ring formation reactions proceed non-enzymatically from preshimalactone epoxide. DFT calculations strongly support the idea that oxabicyclo-ring formation and 8π-6π electrocyclization proceed spontaneously after opening of the preshimalactone epoxide ring through protonation. We confirmed the formation of preshimalactone epoxide in vitro, followed by its non-enzymatic conversion to shimalactones in the dark.     

Behavior and process of background signal formation of hydrogen,carbon, nitrogen,and oxygen in silicon wafers during depth profiling using dual-beam TOF-SIMS

The behavior and mechanism of background signals during depth profiling of atmospheric elements using dual-beam time-of-flight secondary ion mass spectrometry (TOF-SIMS) have been experimentally investigated for silicon wafers. The background signals of atmospheric elements were found to be inversely proportional to the sputtering rate. Most of the background signals are largely attributable to the accumulation of components through adsorption and ion bombardment in the pre-equilibrium state. On the other hand, the contribution of real-time adsorption during the instant after the last sputtering in the equilibrium state is negligible under the present experimental conditions. H₂O is dominant in the background formation process of hydrogen and oxygen, which is supported by the higher adsorption coefficients. The background levels of carbon and nitrogen are lower than those of hydrogen and oxygen. Furthermore, the background signal of carbon with respect to the sputtering rate shows a different trend than the other elements. This could be attributed to accumulation in the pre-equilibrium state. These results indicate that the background levels can be lowered close to those of dynamic-SIMS by using an extremely high sputtering rate in dual-beam TOF-SIMS.     

Biosynthesis of Indole Diterpene Lolitrems: Radical-Induced Cyclization of an Epoxyalcohol Affording a Characteristic Lolitremane Skeleton

Lolitrems are tremorgenic indole diterpenes that exhibit a unique 5/6 bicyclic system of the indole moiety. Although genetic analysis has indicated that the prenyltransferase LtmE and the cytochrome P450 LtmJ are involved in the construction of this unique structure, the detailed mechanism remains to be elucidated. Herein, we report the reconstitution of the biosynthetic pathway for lolitrems employing a recently established genome-editing technique for the expression host Aspergillus oryzae. Heterologous expression and bioconversion of the various intermediates revealed that LtmJ catalyzes multistep oxidation to furnish the lolitrem core. We also isolated the key reaction intermediate with an epoxyalcohol moiety. This observation allowed us to establish the mechanism of radical-induced cyclization, which was firmly supported by density functional theory calculations and a model experiment with a synthetic analogue.     

Switchable C- and N-bound isomers of transition-metal cyanocarbanions: synthesis and interconversions of cyclopentadienyl ruthenium complexes of phenylsulfonylacetonitrile anions

The synthesis, structure, and dynamic behavior of bistable C- and N-bound isomers of transition-metal cyanocarbanions are described. A series of C-bound cyclopentadienyl (Cp) ruthenium phosphane complexes, [Ru{CH(CN)SO2Ph}(Cp)L1L2] (3), and their N-bound isomers, [Ru+(Cp)(NCCH(-)SO2Ph)L1L2] (4), were prepared by treating [RuCl(Cp)(PR3)2] with the sodium salt of phenylsulfonylacetonitrile and performing ligand-exchange reactions with the resulting compounds. Structural characterization by X-ray diffraction indicates that the cyanocarbanion moiety of 3 has an alpha-metalated structure, whereas that of 4 has a zwitterionic, end-on structure. Heating these complexes in aprotic solvents gives rise to irreversible linkage isomerization between C- and N-bound isomers, in which the relative thermal stabilities vary greatly depending on the steric and electronic nature of the ligands. Mechanistic studies of N-to-C isomerization revealed that the reaction proceeds irreversibly in a unimolecular manner without the formation of coordinatively unsaturated species. A metal-sliding process, which occurs over the -C-C triple chemical bond N pi-conjugated surface of the cyanocarbanion moiety, was suggested by results from kinetic studies and density functional theory (DFT) calculations. C-to-N isomerizations proceed by the above-mentioned intramolecular process, with a temperature-dependent contribution from the formation and cleavage of mu2-C,N coordination dimers [{Ru{CH(CN)SO2Ph}(Cp)(PPh3)}2] (15 and 16).