Stereospecific and asymmetric polymerization of 1-phenyldibenzosuberyl methacrylate with radical and anionic initiators

Stereospecific and asymmetric (helix-sense-selective) polymerization of 1-phenyldibenzosuberyl methacrylate (PDBSMA) was performed with radical and anionic initiators. A highly isotactic polymer having triad isotacticity greater than 97% was obtained by radical polymerization with (i-PrOCOO)₂ at 40°C. The radical polymerization of PDBSMA in (+)- and (-)-menthol gave (-)-and (+)-polymers, respectively, whose optical activity is ascribed to the prevailing one-handed helical conformation of a polymer chain. The radical copolymerization of PDBSMA with a small amount of an optically active monomer, (+)-phenyl-2-pyridyl-o-tolylmethyl methacrylate, afforded an optically active copolymer with the prevailing one-handed helical structure of PDBSMA sequences. Asymmetric anionic polymerization of PDBSMA was carried out with the complex of N, N′-diphenylethylenediamine monolithium amide and a chiral ligand, (+)-1-(2-pyrrolidinylmethyl)pyrrolidine in toluene at −78°C. The obtained polymer was highly isotactic and optically active due to nearly 100% one-handed helical structure.     

Membrane permeation-controlled transdermal delivery system design. Influence of controlling membrane and adhesive on skin permeation of isosorbide dinitrate

A membrane permeation-controlled transdermal delivery system (MC-TDS) of isosorbide dinitrate (ISDN), a model drug, was prepared from polyvinyl alcohol aqueous gel containing the drug, a membrane consisting of ethylene-vinyl acetate copolymer membrane and acrylic adhesive (EV-a). The permeability of ISDN through the EV-a membrane was 2.5 times higher than that through excised hairless rat skin. The ratio of plasma concentration of ISDN after application of MC-TDS on stripped (damaged) skin relative to intact skin was lower than that after application of Frandol tape-S, a marketed ISDN TDS, which suggests that the EV-a membrane might work as a control membrane for overall delivery rate of ISDN to the body. When MC-TDS stored at 30 degrees C for 13.5-48h was applied to the damaged skin, however, the initial plasma concentration of ISDN was very much higher than the expected therapeutic level and was not controlled by the EV-a membrane. The initial high plasma concentration of ISDN after application of the stored MC-TDS on the damaged skin was due to migration of ISDN from the reservoir to the adhesive during storage at 30 degrees C. The migration of drugs into the adhesive might be an important problem in developing efficient MC-TDS.     

Effects of Al concentration and resulting long-period superstructures on the plastic properties at room temperature of Al-rich TiAl single crystals

The role of Al₅Ti₃ and h-Al₂Ti long-period superstructures on the plastic properties of TiAl at room temperature is investigated on five single crystals with aluminium content comprised between 54.7 at.%, and 62.5 at.%. After annealing at 1200°C for 1?h, the Al₅Ti₃ superstructure develops in the L1₀ (γ) matrix upon increasing Al concentration except for Ti–62.5 at.%Al where h-Al₂Ti substitutes for Al₅Ti₃. The CRSS for <110]{111} first increases abruptly with the development of the Al₅Ti₃-type ordering. Then, the CRSS reaches a plateau at which dislocations assemble in groups of four to prevent extra anti-phase boundary (APB) from being engendered during glide throughout the Al₅Ti₃ phase. In Ti–62.5 at.%Al, the CRSS for ordinary slip further increases upon the precipitation of h-Al₂Ti in the L1₀ phase, whereas it decreases when the crystal is fully transformed into single-phased Al₅Ti₃. <101] superlattice dislocations are primarily activated under both the [210] and [1?1?8.6] load orientations irrespective of the Al concentration, but the dislocation microstructure strongly depends on orientation as well as on the degree of Al₅Ti₃ ordering. In the [210] orientation, the frequency of the decomposition of <101] dislocations into 1/2<110] and 1/2<112] dislocations decreases abruptly with the development of Al₅Ti₃. This is interpreted in terms of the increased difficulty to move ordinary dislocations. Under the [1?1?8.6] orientation, the density of faulted dipoles diminishes remarkably with the development of Al₅Ti₃. This is consistent with the transformation of the low energy extrinsic stacking fault of the L1₀ phase into a higher energy complex extrinsic stacking fault.     

Multinuclear cobalt–salen complexes with phenylene linker for epoxide polymerizations

Di‐ and trinuclear cobalt (Co)–salen complexes with a benzene ring as a rigid linker were explored for epoxide polymerizations. The dinuclear Co–salen complex with a 1,2‐phenylene linker showed higher catalytic activity than the dinuclear Co–salen complex with a 1,3‐phenylene linker and the trinuclear Co–salen complex with a 1,3,5‐benzenetriyl linker for the copolymerization of propylene oxide (PO) with carbon dioxide. A combination of the absolute configuration of the two Co–salen moieties was found to affect its catalytic activity. The optimized dinuclear Co–salen complex with a heterochiral combination demonstrated highest activity and maintained its catalytic activity under a low catalyst concentration. The heterochiral dinuclear Co–salen complex also showed high activity for the copolymerization of PO with cyclic anhydride. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2150–2159     

Simple Synthesis of a Heterocyclophane Exhibiting Anti-c-Met Activity by Acting as a Hatch Blocking Access to the Active Site**

A simple approach to the synthesis of heterocyclophane consisting of two 4,4’-bithiazoles has been developed in mild conditions. The heterocyclophane with two short chains was conveniently prepared by Hantzsch thiazoles synthesis using the reaction of 3-tert-butoxycarbonyl-3-azapentanethiocarboxamide with 1,4-dibromobutane-2,3-dione in methanol under reflux for only 15 min. Amino groups at the linkers of this heterocyclophane can be functionalized to give acylated and carbamate derivatives. Their properties as protein kinase inhibitors were investigated, and one of the heterocyclophanes exhibited specific anti-activity for c-mesenchymal epithelial transition factor (IC₅₀=603 nm ), among seven types of protein kinases investigated. The computational site identification by ligand competitive saturation method was used to determine why the one heterocyclophane exhibited strong anti-activity for c-mesenchymal epithelial transition factor.     

Representation type of Hecke algebras of type

In this paper we provide a complete classification of the representation type for the blocks for the Hecke algebra of type , stated in terms of combinatorical data. The computation of the complexity of Young modules is a key component in the proof of this classification result.     

Extensions for finite Chevalley groups II

Let be a semisimple simply connected algebraic group defined and split over the field with elements, let be the finite Chevalley group consisting of the -rational points of where , and let be the th Frobenius kernel. The purpose of this paper is to relate extensions between modules in and with extensions between modules in . Among the results obtained are the following: for 2$"> and , the -extensions between two simple -modules are isomorphic to the -extensions between two simple -restricted -modules with suitably ``twisted" highest weights. For , we provide a complete characterization of where and is -restricted. Furthermore, for , necessary and sufficient bounds on the size of the highest weight of a -module are given to insure that the restriction map is an isomorphism. Finally, it is shown that the extensions between two simple -restricted -modules coincide in all three categories provided the highest weights are ``close" together.

     

LET distributions from CR-39 plates on Space Shuttle missions STS-84 and STS-91 and a comparison of the results of the CR-39 plates with those of RRMD-II and RRMD-III telescopes

The LET distributions during the Space Shuttle missions STS-84 (altitude 270-412 km, average 375 km; inclination angle, 51.6 degrees) and STS-91 (altitude 328-397 km, average 373 km; inclination angle, 51.6 degrees) were measured using CR-39 plastic nuclear track detectors. A correction for the dip-angle dependence of the track-formation sensitivity of the CR-39 plates was applied to the data analysis. The absorbed doses and the dose equivalents around RRMD Detector Units, estimated from the LET distributions in the LET region of 4-200 keV/micrometers, fluctuated with standard deviations of +/- 21% to +/- 35% in both flight experiments. The LET distributions obtained from the CR-39 plates agreed well with that obtained from RRMD-II in STS-91. However, the particle fluxes obtained from RRMD-III in STS-84 and STS-91 were two or three times higher than those obtained from RRMD-II and the CR-39 plates. It was concluded that the LET distributions obtained from RRMD-II and the CR-39 plates in the present flight experiments did not include the contribution of target-fragmented secondary heavy particles produced by low-LET particles, such as relativistic or semi-relativistic protons and helium ions, whereas RRMD-III was able to detect these secondary particles because of its low triggering level.     

Propagating beam analysis of fiber wavelength filters with a depressed-index section

A wavelength filter consisting of single-mode and few-mode fibers is investigated numerically. A simple finite-difference beam-propagation method, in which a transparent boundary condition can be imposed, is developed for circularly symmetric waveguides. After confirming the validity of the numerical method by the mode-mismatch loss, we calculate the propagating field in the fiber wavelength filter, in which interference between LP₀₁, and LP₀₂ modes occurs. To improve the filtering operation, a depressed-index fiber is employed for the few-mode fiber. The effects of the radius and refractive index of the depressed section on the transmission power are revealed and discussed. Power is suppressed to less than 0.1% at 1.3 μm, while maintaining power transmission of more than 85% at 1.55 μm. It is also found that the filtering operation shifts to higher wavelengths as the input power is increased when we choose a self-focusing nonlinear material in the depressed section.